Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=661): Process ended prematurely: osmo-stp_10.42.42.5(pid=661) [trial-2366↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=661)]
Standard Output
---------------------------------------------- trial-2366 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 00:07:24.928820 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:24.939770 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 00:07:25.071826 tst cs_paging_gprs_active.py: using LAC 24618 00:07:25.194234 tst cs_paging_gprs_active.py: using RAC 138 00:07:25.310069 tst cs_paging_gprs_active.py: using CellId 24618 00:07:25.426481 tst cs_paging_gprs_active.py: using BVCI 24619 00:07:25.449510 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:25.460151 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:25.470660 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:25.481124 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:25.491498 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:25.502045 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:25.512724 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:25.523298 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:25.534105 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 00:07:25.654200 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 00:07:25.947946 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:07:26.083527 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:07:26.417417 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=651): Launched 00:07:26.695171 run iperf3-srv_10.42.42.10(pid=652): Launched 00:07:26.893988 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:07:27.029495 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:07:27.364351 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=653): Launched 00:07:27.641545 run iperf3-srv_10.42.42.10(pid=654): Launched 00:07:27.839237 tst cs_paging_gprs_active.py:38: start network... 00:07:27.974359 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:07:28.480683 run create_hlr_db(pid=655): Launched 00:07:28.666971 bus /sierra_2: Setting Powered False 00:07:29.688352 run create_hlr_db(pid=655): Terminated: ok {rc=0} 00:07:30.091336 run pcap-recorder_any(filters='host 10.42.42.2')(pid=657): Launched 00:07:30.393767 run osmo-hlr_10.42.42.2(pid=658): Launched 00:07:30.515459 run osmo-stp_10.42.42.5: Starting osmo-stp 00:07:31.111657 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=660): Launched 00:07:31.543390 run osmo-stp_10.42.42.5(pid=661): Launched 00:07:31.781166 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:07:32.350920 run pcap-recorder_any(filters='host 10.42.42.6')(pid=663): Launched 00:07:32.466456 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:07:32.747505 run patchelf(pid=664): Launched 00:07:32.936096 run osmo-stp_10.42.42.5(pid=661): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=661)] 00:07:33.074897 run osmo-stp_10.42.42.5(pid=661): stdout: | (launched: 2022-12-10_00:07:31.281356) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:07:33.213647 run osmo-stp_10.42.42.5(pid=661): stderr: | �[0;m�[38;5;43m20221210000731590 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210000731590 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210000731590 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210000731591 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210000731591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210000731591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210000731591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:07:33.347175 run osmo-stp_10.42.42.5(pid=661): stdout: | (launched: 2022-12-10_00:07:31.281356) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:07:33.479310 run osmo-stp_10.42.42.5(pid=661): stderr: | �[0;m�[38;5;43m20221210000731590 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210000731590 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210000731590 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210000731591 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210000731591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210000731591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210000731591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:07:33.634491 run patchelf(pid=664): Terminating (SIGINT) 00:07:33.815715 run patchelf(pid=664): Terminated: ok {rc=0} 00:07:33.849066 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=661): Process ended prematurely: osmo-stp_10.42.42.5(pid=661) [trial-2366↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=661)] [trial-2366↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 00:07:33.858977 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 00:07:33.922672 run osmo-hlr_10.42.42.2(pid=658): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=658)] 00:07:33.973997 run osmo-hlr_10.42.42.2(pid=658): stdout: | (launched: 2022-12-10_00:07:30.244725) 00:07:34.026020 run osmo-hlr_10.42.42.2(pid=658): stderr: | �[0;m�[1;31m20221210000730422 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210000730422 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210000730422 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210000730422 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210000730422 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210000730422 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210000730434 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210000730444 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210000730445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210000730445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:07:34.070126 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=651): Terminating (SIGTERM) 00:07:34.112341 run iperf3-srv_10.42.42.10(pid=652): Terminating (SIGTERM) 00:07:34.153869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=653): Terminating (SIGTERM) 00:07:34.195968 run iperf3-srv_10.42.42.10(pid=654): Terminating (SIGTERM) 00:07:34.237715 run pcap-recorder_any(filters='host 10.42.42.2')(pid=657): Terminating (SIGTERM) 00:07:34.279780 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=660): Terminating (SIGTERM) 00:07:34.321555 run pcap-recorder_any(filters='host 10.42.42.6')(pid=663): Terminating (SIGTERM) 00:07:34.331654 --- ParallelTerminationStrategy: PID 651 died... 00:07:34.387430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=651): Terminated: ok {rc=0} 00:07:34.398281 --- ParallelTerminationStrategy: PID 652 died... 00:07:34.454184 run iperf3-srv_10.42.42.10(pid=652): Terminated {rc=256} 00:07:34.464239 --- ParallelTerminationStrategy: PID 653 died... 00:07:34.520416 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=653): Terminated: ok {rc=0} 00:07:34.530516 --- ParallelTerminationStrategy: PID 654 died... 00:07:34.585999 run iperf3-srv_10.42.42.10(pid=654): Terminated {rc=256} 00:07:34.595897 --- ParallelTerminationStrategy: PID 657 died... 00:07:34.651370 run pcap-recorder_any(filters='host 10.42.42.2')(pid=657): Terminated: ok {rc=0} 00:07:34.661463 --- ParallelTerminationStrategy: PID 660 died... 00:07:34.717045 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=660): Terminated: ok {rc=0} 00:07:34.727078 --- ParallelTerminationStrategy: PID 663 died... 00:07:34.782099 run pcap-recorder_any(filters='host 10.42.42.6')(pid=663): Terminated: ok {rc=0} 00:07:34.869034 bus /gobi_0: Setting Powered False 00:07:35.976265 bus /gobi_0: Setting Powered False 00:07:37.087165 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=661): Process ended prematurely: osmo-stp_10.42.42.5(pid=661) [trial-2366↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=661)]