Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31246): Process ended prematurely: osmo-stp_10.42.42.5(pid=31246) [trial-2366↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31246)]
Standard Output
---------------------------------------------- trial-2366 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 23:45:33.815313 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:33.826395 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:45:33.982687 tst cs_paging_gprs_active.py: using LAC 24500 23:45:34.104702 tst cs_paging_gprs_active.py: using RAC 20 23:45:34.221728 tst cs_paging_gprs_active.py: using CellId 24500 23:45:34.336010 tst cs_paging_gprs_active.py: using BVCI 24501 23:45:34.358824 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:34.369776 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:34.380647 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:34.391683 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:34.402677 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:34.413617 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:34.424623 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:34.435838 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:34.447156 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:45:34.561558 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:45:34.839429 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:45:34.964066 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:45:35.272574 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31236): Launched 23:45:35.528226 run iperf3-srv_10.42.42.10(pid=31237): Launched 23:45:35.710690 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:45:35.834626 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:45:36.143872 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31238): Launched 23:45:36.399830 run iperf3-srv_10.42.42.10(pid=31239): Launched 23:45:36.582392 tst cs_paging_gprs_active.py:38: start network... 23:45:36.707106 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:45:37.183477 run create_hlr_db(pid=31240): Launched 23:45:37.354353 bus /gobi_6: Setting Powered False 23:45:38.376473 run create_hlr_db(pid=31240): Terminated: ok {rc=0} 23:45:38.799695 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31242): Launched 23:45:39.119097 run osmo-hlr_10.42.42.2(pid=31243): Launched 23:45:39.238464 run osmo-stp_10.42.42.5: Starting osmo-stp 23:45:39.793264 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31245): Launched 23:45:40.113696 run osmo-stp_10.42.42.5(pid=31246): Launched 23:45:40.230624 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:45:40.785762 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31248): Launched 23:45:40.900295 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:45:41.177157 run patchelf(pid=31249): Launched 23:45:41.363193 run osmo-stp_10.42.42.5(pid=31246): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31246)] 23:45:41.500195 run osmo-stp_10.42.42.5(pid=31246): stdout: | (launched: 2022-12-09_23:45:39.957123) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:45:41.637559 run osmo-stp_10.42.42.5(pid=31246): stderr: | �[0;m�[38;5;43m20221209234540147 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209234540148 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209234540148 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209234540148 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209234540150 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209234540151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209234540151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:45:41.769847 run osmo-stp_10.42.42.5(pid=31246): stdout: | (launched: 2022-12-09_23:45:39.957123) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:45:41.901471 run osmo-stp_10.42.42.5(pid=31246): stderr: | �[0;m�[38;5;43m20221209234540147 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209234540148 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209234540148 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209234540148 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209234540150 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209234540151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209234540151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:45:42.054661 run patchelf(pid=31249): Terminating (SIGINT) 23:45:42.233871 run patchelf(pid=31249): Terminated: ok {rc=0} 23:45:42.266820 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31246): Process ended prematurely: osmo-stp_10.42.42.5(pid=31246) [trial-2366↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31246)] [trial-2366↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 23:45:42.276712 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 23:45:42.339787 run osmo-hlr_10.42.42.2(pid=31243): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31243)] 23:45:42.391133 run osmo-hlr_10.42.42.2(pid=31243): stdout: | (launched: 2022-12-09_23:45:38.962763) 23:45:42.442892 run osmo-hlr_10.42.42.2(pid=31243): stderr: | �[0;m�[1;31m20221209234539158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209234539158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209234539158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209234539158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209234539158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209234539158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209234539169 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209234539178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209234539178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209234539178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:45:42.487170 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31236): Terminating (SIGTERM) 23:45:42.528497 run iperf3-srv_10.42.42.10(pid=31237): Terminating (SIGTERM) 23:45:42.571990 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31238): Terminating (SIGTERM) 23:45:42.613505 run iperf3-srv_10.42.42.10(pid=31239): Terminating (SIGTERM) 23:45:42.654787 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31242): Terminating (SIGTERM) 23:45:42.696331 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31245): Terminating (SIGTERM) 23:45:42.738386 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31248): Terminating (SIGTERM) 23:45:42.747874 --- ParallelTerminationStrategy: PID 31236 died... 23:45:42.803703 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31236): Terminated: ok {rc=0} 23:45:42.813739 --- ParallelTerminationStrategy: PID 31237 died... 23:45:42.869421 run iperf3-srv_10.42.42.10(pid=31237): Terminated {rc=256} 23:45:42.879436 --- ParallelTerminationStrategy: PID 31238 died... 23:45:42.935045 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31238): Terminated: ok {rc=0} 23:45:42.944928 --- ParallelTerminationStrategy: PID 31239 died... 23:45:42.999824 run iperf3-srv_10.42.42.10(pid=31239): Terminated {rc=256} 23:45:43.010065 --- ParallelTerminationStrategy: PID 31242 died... 23:45:43.065476 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31242): Terminated: ok {rc=0} 23:45:43.075348 --- ParallelTerminationStrategy: PID 31245 died... 23:45:43.130785 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31245): Terminated: ok {rc=0} 23:45:43.140688 --- ParallelTerminationStrategy: PID 31248 died... 23:45:43.196054 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31248): Terminated: ok {rc=0} 23:45:43.282200 bus /gobi_0: Setting Powered False 23:45:44.385962 bus /gobi_0: Setting Powered False 23:45:45.492025 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31246): Process ended prematurely: osmo-stp_10.42.42.5(pid=31246) [trial-2366↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31246)]