Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=5421): Process ended prematurely: osmo-stp_10.42.42.5(pid=5421) [trial-2367↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5421)]
Standard Output
---------------------------------------------- trial-2367 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 00:55:46.357955 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:55:46.369342 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:55:46.516737 tst cs_paging_gprs_active.py: using LAC 24863 00:55:46.638611 tst cs_paging_gprs_active.py: using RAC 128 00:55:46.790449 tst cs_paging_gprs_active.py: using CellId 24863 00:55:46.919617 tst cs_paging_gprs_active.py: using BVCI 24864 00:55:46.943542 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:55:46.954806 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:55:46.965888 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:55:46.977405 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:55:46.988856 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:55:47.001170 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:55:47.012652 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:55:47.023822 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:55:47.035354 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:55:47.179717 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:55:47.477665 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:55:47.604074 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:55:47.918272 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5411): Launched 00:55:48.180641 run iperf3-srv_10.42.42.10(pid=5412): Launched 00:55:48.365362 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:55:48.491930 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:55:48.805917 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5413): Launched 00:55:49.067525 run iperf3-srv_10.42.42.10(pid=5414): Launched 00:55:49.251900 tst cs_paging_gprs_active.py:38: start network... 00:55:49.378397 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:55:49.856816 run create_hlr_db(pid=5415): Launched 00:55:50.031215 bus /gobi_6: Setting Powered False 00:55:51.053251 run create_hlr_db(pid=5415): Terminated: ok {rc=0} 00:55:51.456752 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5417): Launched 00:55:51.761204 run osmo-hlr_10.42.42.2(pid=5418): Launched 00:55:51.875266 run osmo-stp_10.42.42.5: Starting osmo-stp 00:55:52.400391 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5420): Launched 00:55:52.704552 run osmo-stp_10.42.42.5(pid=5421): Launched 00:55:52.815876 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:55:53.345419 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5423): Launched 00:55:53.453865 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:55:53.718455 run patchelf(pid=5424): Launched 00:55:53.895679 run osmo-stp_10.42.42.5(pid=5421): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5421)] 00:55:54.025764 run osmo-stp_10.42.42.5(pid=5421): stdout: | (launched: 2022-12-10_00:55:52.553885) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:55:54.155830 run osmo-stp_10.42.42.5(pid=5421): stderr: | �[0;m�[38;5;43m20221210005552722 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210005552723 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210005552723 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210005552723 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210005552724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210005552724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210005552724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:55:54.281253 run osmo-stp_10.42.42.5(pid=5421): stdout: | (launched: 2022-12-10_00:55:52.553885) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:55:54.405571 run osmo-stp_10.42.42.5(pid=5421): stderr: | �[0;m�[38;5;43m20221210005552722 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210005552723 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210005552723 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210005552723 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210005552724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210005552724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210005552724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:55:54.550151 run patchelf(pid=5424): Terminating (SIGINT) 00:55:54.719523 run patchelf(pid=5424): Terminated: ok {rc=0} 00:55:54.750763 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5421): Process ended prematurely: osmo-stp_10.42.42.5(pid=5421) [trial-2367↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5421)] [trial-2367↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 00:55:54.759795 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 00:55:54.820362 run osmo-hlr_10.42.42.2(pid=5418): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5418)] 00:55:54.869603 run osmo-hlr_10.42.42.2(pid=5418): stdout: | (launched: 2022-12-10_00:55:51.610607) 00:55:54.919543 run osmo-hlr_10.42.42.2(pid=5418): stderr: | �[0;m�[1;31m20221210005551788 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210005551788 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210005551789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210005551789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210005551789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210005551789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210005551802 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210005551810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210005551811 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210005551811 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:55:54.961764 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5411): Terminating (SIGTERM) 00:55:55.001716 run iperf3-srv_10.42.42.10(pid=5412): Terminating (SIGTERM) 00:55:55.041693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5413): Terminating (SIGTERM) 00:55:55.081416 run iperf3-srv_10.42.42.10(pid=5414): Terminating (SIGTERM) 00:55:55.121367 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5417): Terminating (SIGTERM) 00:55:55.161262 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5420): Terminating (SIGTERM) 00:55:55.201140 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5423): Terminating (SIGTERM) 00:55:55.210478 --- ParallelTerminationStrategy: PID 5411 died... 00:55:55.264610 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5411): Terminated: ok {rc=0} 00:55:55.274148 --- ParallelTerminationStrategy: PID 5412 died... 00:55:55.327067 run iperf3-srv_10.42.42.10(pid=5412): Terminated {rc=256} 00:55:55.336678 --- ParallelTerminationStrategy: PID 5413 died... 00:55:55.390280 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5413): Terminated: ok {rc=0} 00:55:55.400108 --- ParallelTerminationStrategy: PID 5414 died... 00:55:55.453937 run iperf3-srv_10.42.42.10(pid=5414): Terminated {rc=256} 00:55:55.463292 --- ParallelTerminationStrategy: PID 5417 died... 00:55:55.516646 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5417): Terminated: ok {rc=0} 00:55:55.526332 --- ParallelTerminationStrategy: PID 5420 died... 00:55:55.579181 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5420): Terminated: ok {rc=0} 00:55:55.588866 --- ParallelTerminationStrategy: PID 5423 died... 00:55:55.641965 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5423): Terminated: ok {rc=0} 00:55:55.732525 bus /gobi_0: Setting Powered False 00:55:56.838711 bus /gobi_0: Setting Powered False 00:55:57.945968 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5421): Process ended prematurely: osmo-stp_10.42.42.5(pid=5421) [trial-2367↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5421)]