Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=22940): Process ended prematurely: osmo-stp_10.42.42.5(pid=22940) [trial-2369↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22940)]
Standard Output
---------------------------------------------- trial-2369 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 03:51:05.162796 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:05.174312 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 03:51:05.324068 tst cs_paging_gprs_active.py: using LAC 25790 03:51:05.446379 tst cs_paging_gprs_active.py: using RAC 35 03:51:05.568549 tst cs_paging_gprs_active.py: using CellId 25790 03:51:05.690877 tst cs_paging_gprs_active.py: using BVCI 25791 03:51:05.715035 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:05.726509 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:05.737690 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:05.748789 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:05.760158 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:05.771565 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:05.782986 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:05.794296 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:05.805767 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:51:05.922204 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:51:06.194914 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:51:06.316829 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:51:06.622108 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22930): Launched 03:51:06.874582 run iperf3-srv_10.42.42.10(pid=22931): Launched 03:51:07.053517 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:51:07.175700 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:51:07.479357 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22932): Launched 03:51:07.731224 run iperf3-srv_10.42.42.10(pid=22933): Launched 03:51:07.910192 tst cs_paging_gprs_active.py:38: start network... 03:51:08.032158 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:51:08.495209 run create_hlr_db(pid=22934): Launched 03:51:08.664688 bus /gobi_6: Setting Powered False 03:51:09.685426 run create_hlr_db(pid=22934): Terminated: ok {rc=0} 03:51:10.102135 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22936): Launched 03:51:10.415989 run osmo-hlr_10.42.42.2(pid=22937): Launched 03:51:10.535783 run osmo-stp_10.42.42.5: Starting osmo-stp 03:51:11.080234 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22939): Launched 03:51:11.394085 run osmo-stp_10.42.42.5(pid=22940): Launched 03:51:11.507718 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:51:12.054144 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22942): Launched 03:51:12.166493 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:51:12.439047 run patchelf(pid=22943): Launched 03:51:12.623544 run osmo-stp_10.42.42.5(pid=22940): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22940)] 03:51:12.758103 run osmo-stp_10.42.42.5(pid=22940): stdout: | (launched: 2022-12-10_03:51:11.240541) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:51:12.893185 run osmo-stp_10.42.42.5(pid=22940): stderr: | �[0;m�[38;5;43m20221210035111434 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035111434 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035111434 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035111434 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035111435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035111435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035111435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:51:13.023256 run osmo-stp_10.42.42.5(pid=22940): stdout: | (launched: 2022-12-10_03:51:11.240541) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:51:13.152227 run osmo-stp_10.42.42.5(pid=22940): stderr: | �[0;m�[38;5;43m20221210035111434 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035111434 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035111434 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035111434 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035111435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035111435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035111435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:51:13.302522 run patchelf(pid=22943): Terminating (SIGINT) 03:51:13.478634 run patchelf(pid=22943): Terminated: ok {rc=0} 03:51:13.511580 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22940): Process ended prematurely: osmo-stp_10.42.42.5(pid=22940) [trial-2369↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22940)] [trial-2369↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 03:51:13.521813 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 03:51:13.583674 run osmo-hlr_10.42.42.2(pid=22937): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22937)] 03:51:13.634227 run osmo-hlr_10.42.42.2(pid=22937): stdout: | (launched: 2022-12-10_03:51:10.262164) 03:51:13.685294 run osmo-hlr_10.42.42.2(pid=22937): stderr: | �[0;m�[1;31m20221210035110458 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210035110458 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210035110458 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210035110458 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210035110459 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210035110459 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210035110471 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210035110481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210035110482 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210035110482 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:51:13.728837 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22930): Terminating (SIGTERM) 03:51:13.770071 run iperf3-srv_10.42.42.10(pid=22931): Terminating (SIGTERM) 03:51:13.811340 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22932): Terminating (SIGTERM) 03:51:13.852619 run iperf3-srv_10.42.42.10(pid=22933): Terminating (SIGTERM) 03:51:13.893884 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22936): Terminating (SIGTERM) 03:51:13.935191 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22939): Terminating (SIGTERM) 03:51:13.976559 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22942): Terminating (SIGTERM) 03:51:13.986311 --- ParallelTerminationStrategy: PID 22930 died... 03:51:14.041342 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22930): Terminated: ok {rc=0} 03:51:14.051559 --- ParallelTerminationStrategy: PID 22931 died... 03:51:14.106843 run iperf3-srv_10.42.42.10(pid=22931): Terminated {rc=256} 03:51:14.116836 --- ParallelTerminationStrategy: PID 22932 died... 03:51:14.171631 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22932): Terminated: ok {rc=0} 03:51:14.181940 --- ParallelTerminationStrategy: PID 22933 died... 03:51:14.236700 run iperf3-srv_10.42.42.10(pid=22933): Terminated {rc=256} 03:51:14.246664 --- ParallelTerminationStrategy: PID 22936 died... 03:51:14.301440 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22936): Terminated: ok {rc=0} 03:51:14.311313 --- ParallelTerminationStrategy: PID 22939 died... 03:51:14.365803 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22939): Terminated: ok {rc=0} 03:51:14.375904 --- ParallelTerminationStrategy: PID 22942 died... 03:51:14.430274 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22942): Terminated: ok {rc=0} 03:51:14.515799 bus /gobi_0: Setting Powered False 03:51:15.621064 bus /gobi_0: Setting Powered False 03:51:16.751671 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22940): Process ended prematurely: osmo-stp_10.42.42.5(pid=22940) [trial-2369↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22940)]