Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26038): Process ended prematurely: osmo-stp_10.42.42.5(pid=26038) [trial-2369↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26038)]
Standard Output
---------------------------------------------- trial-2369 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 04:23:19.334115 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:19.346531 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:23:19.490761 tst cs_paging_gprs_active.py: using LAC 25964 04:23:19.618225 tst cs_paging_gprs_active.py: using RAC 209 04:23:19.745486 tst cs_paging_gprs_active.py: using CellId 25964 04:23:19.869613 tst cs_paging_gprs_active.py: using BVCI 25965 04:23:19.894600 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:19.907443 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:19.919075 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:19.931035 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:19.942896 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:19.954680 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:19.966935 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:19.978764 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:19.990865 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:23:20.113934 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:23:20.410178 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:23:20.546642 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:23:20.887977 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26027): Launched 04:23:21.161458 run iperf3-srv_10.42.42.10(pid=26029): Launched 04:23:21.343233 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:23:21.470137 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:23:21.798288 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26030): Launched 04:23:22.074966 run iperf3-srv_10.42.42.10(pid=26031): Launched 04:23:22.258678 tst cs_paging_gprs_active.py:38: start network... 04:23:22.385379 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:23:22.901781 run create_hlr_db(pid=26032): Launched 04:23:23.079387 bus /gobi_6: Setting Powered False 04:23:24.103568 run create_hlr_db(pid=26032): Terminated: ok {rc=0} 04:23:24.535392 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26034): Launched 04:23:24.945707 run osmo-hlr_10.42.42.2(pid=26035): Launched 04:23:25.182124 run osmo-stp_10.42.42.5: Starting osmo-stp 04:23:25.837907 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26037): Launched 04:23:26.249911 run osmo-stp_10.42.42.5(pid=26038): Launched 04:23:26.491297 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:23:27.102616 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26040): Launched 04:23:27.215536 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:23:27.507765 run patchelf(pid=26041): Launched 04:23:27.694304 run osmo-stp_10.42.42.5(pid=26038): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26038)] 04:23:27.830681 run osmo-stp_10.42.42.5(pid=26038): stdout: | (launched: 2022-12-10_04:23:25.996731) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:23:27.968014 run osmo-stp_10.42.42.5(pid=26038): stderr: | �[0;m�[38;5;43m20221210042326324 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210042326324 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210042326324 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210042326324 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210042326325 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210042326325 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210042326325 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:23:28.099429 run osmo-stp_10.42.42.5(pid=26038): stdout: | (launched: 2022-12-10_04:23:25.996731) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:23:28.229223 run osmo-stp_10.42.42.5(pid=26038): stderr: | �[0;m�[38;5;43m20221210042326324 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210042326324 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210042326324 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210042326324 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210042326325 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210042326325 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210042326325 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:23:28.381447 run patchelf(pid=26041): Terminating (SIGINT) 04:23:28.560240 run patchelf(pid=26041): Terminated: ok {rc=0} 04:23:28.593751 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26038): Process ended prematurely: osmo-stp_10.42.42.5(pid=26038) [trial-2369↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26038)] [trial-2369↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 04:23:28.604326 tst cs_paging_gprs_active.py:38: Test FAILED (9.3 sec) 04:23:28.670620 run osmo-hlr_10.42.42.2(pid=26035): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26035)] 04:23:28.723483 run osmo-hlr_10.42.42.2(pid=26035): stdout: | (launched: 2022-12-10_04:23:24.693851) 04:23:28.776074 run osmo-hlr_10.42.42.2(pid=26035): stderr: | �[0;m�[1;31m20221210042325040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210042325040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210042325040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210042325040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210042325040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210042325040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210042325060 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210042325078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210042325078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210042325078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:23:28.819750 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26027): Terminating (SIGTERM) 04:23:28.865066 run iperf3-srv_10.42.42.10(pid=26029): Terminating (SIGTERM) 04:23:28.910337 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26030): Terminating (SIGTERM) 04:23:28.955346 run iperf3-srv_10.42.42.10(pid=26031): Terminating (SIGTERM) 04:23:29.000213 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26034): Terminating (SIGTERM) 04:23:29.044636 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26037): Terminating (SIGTERM) 04:23:29.086814 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26040): Terminating (SIGTERM) 04:23:29.100291 --- ParallelTerminationStrategy: PID 26027 died... 04:23:29.158682 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26027): Terminated: ok {rc=0} 04:23:29.169250 --- ParallelTerminationStrategy: PID 26029 died... 04:23:29.226330 run iperf3-srv_10.42.42.10(pid=26029): Terminated {rc=256} 04:23:29.236823 --- ParallelTerminationStrategy: PID 26030 died... 04:23:29.293928 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26030): Terminated: ok {rc=0} 04:23:29.305543 --- ParallelTerminationStrategy: PID 26031 died... 04:23:29.362021 run iperf3-srv_10.42.42.10(pid=26031): Terminated {rc=256} 04:23:29.372853 --- ParallelTerminationStrategy: PID 26034 died... 04:23:29.429582 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26034): Terminated: ok {rc=0} 04:23:29.440140 --- ParallelTerminationStrategy: PID 26037 died... 04:23:29.498797 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26037): Terminated: ok {rc=0} 04:23:29.509462 --- ParallelTerminationStrategy: PID 26040 died... 04:23:29.566594 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26040): Terminated: ok {rc=0} 04:23:29.654374 bus /gobi_0: Setting Powered False 04:23:30.762049 bus /gobi_0: Setting Powered False 04:23:31.885348 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26038): Process ended prematurely: osmo-stp_10.42.42.5(pid=26038) [trial-2369↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26038)]