Failed
gprs:trx-b200+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=556): Process ended prematurely: osmo-stp_10.42.42.5(pid=556) [trial-2370↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=556)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-b200+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 05:53:57.499411 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:57.511557 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 05:53:57.675642 tst ping_idle_ping.py: using LAC 26301 05:53:57.799555 tst ping_idle_ping.py: using RAC 36 05:53:57.923718 tst ping_idle_ping.py: using CellId 26301 05:53:58.049772 tst ping_idle_ping.py: using BVCI 26302 05:53:58.074519 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:58.086000 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:58.097246 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:58.108899 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:58.120478 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:58.132059 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:58.143790 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:58.155325 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:53:58.430750 tst ping_idle_ping.py:24: start network... 05:53:58.553794 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:53:59.022478 run create_hlr_db(pid=550): Launched 05:53:59.193495 bus /gobi_6: Setting Powered False 05:54:00.213079 run create_hlr_db(pid=550): Terminated: ok {rc=0} 05:54:00.636729 run pcap-recorder_any(filters='host 10.42.42.2')(pid=552): Launched 05:54:01.097552 run osmo-hlr_10.42.42.2(pid=553): Launched 05:54:01.274555 run osmo-stp_10.42.42.5: Starting osmo-stp 05:54:01.822746 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=555): Launched 05:54:02.181652 run osmo-stp_10.42.42.5(pid=556): Launched 05:54:02.455233 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:54:03.007790 run pcap-recorder_any(filters='host 10.42.42.6')(pid=558): Launched 05:54:03.120397 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:54:03.397120 run patchelf(pid=559): Launched 05:54:03.581812 run osmo-stp_10.42.42.5(pid=556): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=556)] 05:54:03.717127 run osmo-stp_10.42.42.5(pid=556): stdout: | (launched: 2022-12-10_05:54:01.977014) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:54:03.852464 run osmo-stp_10.42.42.5(pid=556): stderr: | �[0;m�[38;5;43m20221210055402341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055402341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055402341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055402342 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055402342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055402342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055402342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:54:03.982746 run osmo-stp_10.42.42.5(pid=556): stdout: | (launched: 2022-12-10_05:54:01.977014) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:54:04.112301 run osmo-stp_10.42.42.5(pid=556): stderr: | �[0;m�[38;5;43m20221210055402341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055402341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055402341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055402342 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055402342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055402342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055402342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:54:04.262815 run patchelf(pid=559): Terminating (SIGINT) 05:54:04.438934 run patchelf(pid=559): Terminated: ok {rc=0} 05:54:04.470966 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=556): Process ended prematurely: osmo-stp_10.42.42.5(pid=556) [trial-2370↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=556)] [trial-2370↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 05:54:04.480135 tst ping_idle_ping.py:27: Test FAILED (7.0 sec) 05:54:04.542182 run osmo-hlr_10.42.42.2(pid=553): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=553)] 05:54:04.593014 run osmo-hlr_10.42.42.2(pid=553): stdout: | (launched: 2022-12-10_05:54:00.797203) 05:54:04.644306 run osmo-hlr_10.42.42.2(pid=553): stderr: | �[0;m�[1;31m20221210055401076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210055401076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210055401076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210055401076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210055401076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210055401077 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210055401092 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-b200+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210055401115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210055401116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210055401116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:54:04.688129 run pcap-recorder_any(filters='host 10.42.42.2')(pid=552): Terminating (SIGTERM) 05:54:04.729640 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=555): Terminating (SIGTERM) 05:54:04.770958 run pcap-recorder_any(filters='host 10.42.42.6')(pid=558): Terminating (SIGTERM) 05:54:04.780498 --- ParallelTerminationStrategy: PID 552 died... 05:54:04.835738 run pcap-recorder_any(filters='host 10.42.42.2')(pid=552): Terminated: ok {rc=0} 05:54:04.845815 --- ParallelTerminationStrategy: PID 555 died... 05:54:04.901150 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=555): Terminated: ok {rc=0} 05:54:04.911118 --- ParallelTerminationStrategy: PID 558 died... 05:54:04.966211 run pcap-recorder_any(filters='host 10.42.42.6')(pid=558): Terminated: ok {rc=0} 05:54:05.050353 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=556): Process ended prematurely: osmo-stp_10.42.42.5(pid=556) [trial-2370↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=556)]