Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=32483): Process ended prematurely: osmo-stp_10.42.42.5(pid=32483) [trial-2370↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32483)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 05:50:06.119934 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:06.130980 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 05:50:06.276191 tst cs_paging_gprs_active.py: using LAC 26282 05:50:06.403771 tst cs_paging_gprs_active.py: using RAC 17 05:50:06.532714 tst cs_paging_gprs_active.py: using CellId 26282 05:50:06.659268 tst cs_paging_gprs_active.py: using BVCI 26283 05:50:06.684180 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:06.695389 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:06.706459 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:06.717432 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:06.728254 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:06.739119 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:06.750168 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:06.761058 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:06.772103 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 05:50:06.894818 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 05:50:07.188924 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:50:07.325318 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:50:07.665711 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32473): Launched 05:50:07.947329 run iperf3-srv_10.42.42.10(pid=32474): Launched 05:50:08.148444 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:50:08.284752 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:50:08.626531 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32475): Launched 05:50:08.910489 run iperf3-srv_10.42.42.10(pid=32476): Launched 05:50:09.110891 tst cs_paging_gprs_active.py:38: start network... 05:50:09.247177 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:50:09.771153 run create_hlr_db(pid=32477): Launched 05:50:09.960525 bus /sierra_2: Setting Powered False 05:50:10.981625 run create_hlr_db(pid=32477): Terminated: ok {rc=0} 05:50:11.416442 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32479): Launched 05:50:11.745432 run osmo-hlr_10.42.42.2(pid=32480): Launched 05:50:11.864031 run osmo-stp_10.42.42.5: Starting osmo-stp 05:50:12.432669 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32482): Launched 05:50:12.760676 run osmo-stp_10.42.42.5(pid=32483): Launched 05:50:12.878992 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:50:13.452015 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32485): Launched 05:50:13.569082 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:50:13.856277 run patchelf(pid=32486): Launched 05:50:14.048302 run osmo-stp_10.42.42.5(pid=32483): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32483)] 05:50:14.187875 run osmo-stp_10.42.42.5(pid=32483): stdout: | (launched: 2022-12-10_05:50:12.598701) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:50:14.327749 run osmo-stp_10.42.42.5(pid=32483): stderr: | �[0;m�[38;5;43m20221210055012796 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055012797 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055012797 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055012797 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055012798 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055012798 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055012798 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:50:14.463201 run osmo-stp_10.42.42.5(pid=32483): stdout: | (launched: 2022-12-10_05:50:12.598701) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:50:14.597477 run osmo-stp_10.42.42.5(pid=32483): stderr: | �[0;m�[38;5;43m20221210055012796 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055012797 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055012797 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055012797 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055012798 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055012798 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055012798 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:50:14.753316 run patchelf(pid=32486): Terminating (SIGINT) 05:50:14.936200 run patchelf(pid=32486): Terminated: ok {rc=0} 05:50:14.970345 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32483): Process ended prematurely: osmo-stp_10.42.42.5(pid=32483) [trial-2370↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32483)] [trial-2370↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 05:50:14.980391 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 05:50:15.042955 run osmo-hlr_10.42.42.2(pid=32480): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32480)] 05:50:15.094165 run osmo-hlr_10.42.42.2(pid=32480): stdout: | (launched: 2022-12-10_05:50:11.583240) 05:50:15.145875 run osmo-hlr_10.42.42.2(pid=32480): stderr: | �[0;m�[1;31m20221210055011785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210055011785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210055011785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210055011785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210055011785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210055011786 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210055011797 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210055011806 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210055011806 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210055011806 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:50:15.190024 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32473): Terminating (SIGTERM) 05:50:15.231586 run iperf3-srv_10.42.42.10(pid=32474): Terminating (SIGTERM) 05:50:15.273285 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32475): Terminating (SIGTERM) 05:50:15.314689 run iperf3-srv_10.42.42.10(pid=32476): Terminating (SIGTERM) 05:50:15.356333 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32479): Terminating (SIGTERM) 05:50:15.397983 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32482): Terminating (SIGTERM) 05:50:15.440099 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32485): Terminating (SIGTERM) 05:50:15.449848 --- ParallelTerminationStrategy: PID 32473 died... 05:50:15.505762 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32473): Terminated: ok {rc=0} 05:50:15.515773 --- ParallelTerminationStrategy: PID 32474 died... 05:50:15.571320 run iperf3-srv_10.42.42.10(pid=32474): Terminated {rc=256} 05:50:15.581546 --- ParallelTerminationStrategy: PID 32475 died... 05:50:15.637589 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32475): Terminated: ok {rc=0} 05:50:15.647680 --- ParallelTerminationStrategy: PID 32476 died... 05:50:15.702973 run iperf3-srv_10.42.42.10(pid=32476): Terminated {rc=256} 05:50:15.712850 --- ParallelTerminationStrategy: PID 32479 died... 05:50:15.768199 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32479): Terminated: ok {rc=0} 05:50:15.778267 --- ParallelTerminationStrategy: PID 32482 died... 05:50:15.836651 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32482): Terminated: ok {rc=0} 05:50:15.847368 --- ParallelTerminationStrategy: PID 32485 died... 05:50:15.914720 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32485): Terminated: ok {rc=0} 05:50:16.023131 bus /gobi_0: Setting Powered False 05:50:17.145466 bus /gobi_0: Setting Powered False 05:50:18.254111 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32483): Process ended prematurely: osmo-stp_10.42.42.5(pid=32483) [trial-2370↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32483)]