Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=26211): Process ended prematurely: osmo-stp_10.42.42.5(pid=26211) [trial-2373↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26211)]
Standard Output
---------------------------------------------- trial-2373 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 09:55:59.622986 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:55:59.633689 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 09:55:59.774125 tst cs_paging_gprs_active.py: using LAC 27587 09:55:59.891175 tst cs_paging_gprs_active.py: using RAC 47 09:56:00.007993 tst cs_paging_gprs_active.py: using CellId 27587 09:56:00.125129 tst cs_paging_gprs_active.py: using BVCI 27588 09:56:00.148368 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:56:00.159223 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:56:00.169897 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:56:00.180440 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:56:00.190964 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:56:00.201543 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:56:00.212486 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:56:00.223003 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:56:00.233784 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 09:56:00.353693 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 09:56:00.648663 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:56:00.784525 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:56:01.160724 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26201): Launched 09:56:01.464341 run iperf3-srv_10.42.42.10(pid=26202): Launched 09:56:01.669199 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:56:01.808654 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:56:02.175069 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26203): Launched 09:56:02.436382 run iperf3-srv_10.42.42.10(pid=26204): Launched 09:56:02.621805 tst cs_paging_gprs_active.py:38: start network... 09:56:02.747344 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:56:03.230578 run create_hlr_db(pid=26205): Launched 09:56:03.404317 bus /gobi_6: Setting Powered False 09:56:04.426473 run create_hlr_db(pid=26205): Terminated: ok {rc=0} 09:56:04.858917 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26207): Launched 09:56:05.182152 run osmo-hlr_10.42.42.2(pid=26208): Launched 09:56:05.303670 run osmo-stp_10.42.42.5: Starting osmo-stp 09:56:05.868932 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26210): Launched 09:56:06.191862 run osmo-stp_10.42.42.5(pid=26211): Launched 09:56:06.310175 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:56:06.873415 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26213): Launched 09:56:06.981591 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:56:07.245513 run patchelf(pid=26214): Launched 09:56:07.423497 run osmo-stp_10.42.42.5(pid=26211): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26211)] 09:56:07.553471 run osmo-stp_10.42.42.5(pid=26211): stdout: | (launched: 2022-12-10_09:56:06.033899) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:56:07.683768 run osmo-stp_10.42.42.5(pid=26211): stderr: | �[0;m�[38;5;43m20221210095606226 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210095606227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210095606227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210095606227 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210095606228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210095606228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210095606228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:56:07.809268 run osmo-stp_10.42.42.5(pid=26211): stdout: | (launched: 2022-12-10_09:56:06.033899) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:56:07.933636 run osmo-stp_10.42.42.5(pid=26211): stderr: | �[0;m�[38;5;43m20221210095606226 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210095606227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210095606227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210095606227 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210095606228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210095606228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210095606228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:56:08.078780 run patchelf(pid=26214): Terminating (SIGINT) 09:56:08.249989 run patchelf(pid=26214): Terminated: ok {rc=0} 09:56:08.281470 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26211): Process ended prematurely: osmo-stp_10.42.42.5(pid=26211) [trial-2373↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26211)] [trial-2373↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 09:56:08.290554 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 09:56:08.350830 run osmo-hlr_10.42.42.2(pid=26208): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26208)] 09:56:08.399664 run osmo-hlr_10.42.42.2(pid=26208): stdout: | (launched: 2022-12-10_09:56:05.023946) 09:56:08.449196 run osmo-hlr_10.42.42.2(pid=26208): stderr: | �[0;m�[1;31m20221210095605223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210095605223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210095605223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210095605223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210095605223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210095605223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210095605235 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210095605244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210095605244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210095605244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:56:08.491405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26201): Terminating (SIGTERM) 09:56:08.531090 run iperf3-srv_10.42.42.10(pid=26202): Terminating (SIGTERM) 09:56:08.570869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26203): Terminating (SIGTERM) 09:56:08.610627 run iperf3-srv_10.42.42.10(pid=26204): Terminating (SIGTERM) 09:56:08.650749 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26207): Terminating (SIGTERM) 09:56:08.690818 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26210): Terminating (SIGTERM) 09:56:08.730461 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26213): Terminating (SIGTERM) 09:56:08.739598 --- ParallelTerminationStrategy: PID 26201 died... 09:56:08.792663 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26201): Terminated: ok {rc=0} 09:56:08.802213 --- ParallelTerminationStrategy: PID 26202 died... 09:56:08.854955 run iperf3-srv_10.42.42.10(pid=26202): Terminated {rc=256} 09:56:08.864352 --- ParallelTerminationStrategy: PID 26203 died... 09:56:08.917592 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26203): Terminated: ok {rc=0} 09:56:08.927040 --- ParallelTerminationStrategy: PID 26204 died... 09:56:08.979681 run iperf3-srv_10.42.42.10(pid=26204): Terminated {rc=256} 09:56:08.989266 --- ParallelTerminationStrategy: PID 26207 died... 09:56:09.041929 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26207): Terminated: ok {rc=0} 09:56:09.051382 --- ParallelTerminationStrategy: PID 26210 died... 09:56:09.104156 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26210): Terminated: ok {rc=0} 09:56:09.113782 --- ParallelTerminationStrategy: PID 26213 died... 09:56:09.166939 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26213): Terminated: ok {rc=0} 09:56:09.255533 bus /gobi_0: Setting Powered False 09:56:10.359625 bus /gobi_0: Setting Powered False 09:56:11.472213 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26211): Process ended prematurely: osmo-stp_10.42.42.5(pid=26211) [trial-2373↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26211)]