Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=28321): Process ended prematurely: osmo-stp_10.42.42.5(pid=28321) [trial-2373↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28321)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:22:20.318878 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:20.330492 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:22:20.496065 tst cs_paging_gprs_active.py: using LAC 27727 10:22:20.623861 tst cs_paging_gprs_active.py: using RAC 187 10:22:20.749457 tst cs_paging_gprs_active.py: using CellId 27727 10:22:20.875505 tst cs_paging_gprs_active.py: using BVCI 27728 10:22:20.900522 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:20.912161 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:20.923773 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:20.935691 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:20.947122 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:20.958957 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:20.971544 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:20.982929 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:20.994712 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:22:21.118751 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:22:21.414785 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:22:21.550823 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:22:21.886802 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28310): Launched 10:22:22.166574 run iperf3-srv_10.42.42.10(pid=28311): Launched 10:22:22.366659 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:22:22.503066 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:22:22.839027 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28312): Launched 10:22:23.117585 run iperf3-srv_10.42.42.10(pid=28313): Launched 10:22:23.317667 tst cs_paging_gprs_active.py:38: start network... 10:22:23.453324 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:22:23.963205 run create_hlr_db(pid=28314): Launched 10:22:24.153188 bus /gobi_6: Setting Powered False 10:22:25.171912 run create_hlr_db(pid=28314): Terminated: ok {rc=0} 10:22:25.579525 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28316): Launched 10:22:25.882501 run osmo-hlr_10.42.42.2(pid=28317): Launched 10:22:26.002031 run osmo-stp_10.42.42.5: Starting osmo-stp 10:22:26.538478 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28319): Launched 10:22:26.841884 run osmo-stp_10.42.42.5(pid=28321): Launched 10:22:26.952302 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:22:27.482796 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28323): Launched 10:22:27.590683 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:22:27.856213 run patchelf(pid=28324): Launched 10:22:28.034674 run osmo-stp_10.42.42.5(pid=28321): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28321)] 10:22:28.164361 run osmo-stp_10.42.42.5(pid=28321): stdout: | (launched: 2022-12-10_10:22:26.692940) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:22:28.294861 run osmo-stp_10.42.42.5(pid=28321): stderr: | �[0;m�[38;5;43m20221210102226865 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210102226866 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210102226866 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210102226866 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210102226867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210102226867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210102226867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:22:28.420722 run osmo-stp_10.42.42.5(pid=28321): stdout: | (launched: 2022-12-10_10:22:26.692940) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:22:28.545704 run osmo-stp_10.42.42.5(pid=28321): stderr: | �[0;m�[38;5;43m20221210102226865 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210102226866 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210102226866 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210102226866 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210102226867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210102226867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210102226867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:22:28.691599 run patchelf(pid=28324): Terminating (SIGINT) 10:22:28.863480 run patchelf(pid=28324): Terminated: ok {rc=0} 10:22:28.895153 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28321): Process ended prematurely: osmo-stp_10.42.42.5(pid=28321) [trial-2373↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28321)] [trial-2373↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:22:28.904338 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 10:22:28.963843 run osmo-hlr_10.42.42.2(pid=28317): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28317)] 10:22:29.012318 run osmo-hlr_10.42.42.2(pid=28317): stdout: | (launched: 2022-12-10_10:22:25.734211) 10:22:29.061562 run osmo-hlr_10.42.42.2(pid=28317): stderr: | �[0;m�[1;31m20221210102225912 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210102225912 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210102225912 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210102225912 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210102225912 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210102225912 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210102225925 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210102225934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210102225934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210102225934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:22:29.103501 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28310): Terminating (SIGTERM) 10:22:29.143045 run iperf3-srv_10.42.42.10(pid=28311): Terminating (SIGTERM) 10:22:29.182536 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28312): Terminating (SIGTERM) 10:22:29.222522 run iperf3-srv_10.42.42.10(pid=28313): Terminating (SIGTERM) 10:22:29.262155 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28316): Terminating (SIGTERM) 10:22:29.301478 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28319): Terminating (SIGTERM) 10:22:29.340990 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28323): Terminating (SIGTERM) 10:22:29.350077 --- ParallelTerminationStrategy: PID 28310 died... 10:22:29.402824 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28310): Terminated: ok {rc=0} 10:22:29.412204 --- ParallelTerminationStrategy: PID 28311 died... 10:22:29.465162 run iperf3-srv_10.42.42.10(pid=28311): Terminated {rc=256} 10:22:29.474565 --- ParallelTerminationStrategy: PID 28312 died... 10:22:29.527621 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28312): Terminated: ok {rc=0} 10:22:29.537131 --- ParallelTerminationStrategy: PID 28313 died... 10:22:29.589595 run iperf3-srv_10.42.42.10(pid=28313): Terminated {rc=256} 10:22:29.598983 --- ParallelTerminationStrategy: PID 28316 died... 10:22:29.651631 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28316): Terminated: ok {rc=0} 10:22:29.661180 --- ParallelTerminationStrategy: PID 28319 died... 10:22:29.713603 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28319): Terminated: ok {rc=0} 10:22:29.723083 --- ParallelTerminationStrategy: PID 28323 died... 10:22:29.775552 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28323): Terminated: ok {rc=0} 10:22:29.858187 bus /gobi_0: Setting Powered False 10:22:30.994311 bus /gobi_0: Setting Powered False 10:22:32.109733 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28321): Process ended prematurely: osmo-stp_10.42.42.5(pid=28321) [trial-2373↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28321)]