Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=7817): Process ended prematurely: osmo-stp_10.42.42.5(pid=7817) [trial-2374↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7817)]
Standard Output
---------------------------------------------- trial-2374 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 12:24:32.657184 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:24:32.667680 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 12:24:32.797451 tst cs_paging_gprs_active.py: using LAC 28377 12:24:32.912125 tst cs_paging_gprs_active.py: using RAC 72 12:24:33.027386 tst cs_paging_gprs_active.py: using CellId 28377 12:24:33.145276 tst cs_paging_gprs_active.py: using BVCI 28378 12:24:33.167801 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:24:33.178416 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:24:33.188735 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:24:33.199276 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:24:33.209627 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:24:33.219834 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:24:33.230534 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:24:33.240680 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:24:33.251200 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 12:24:33.369160 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 12:24:33.663660 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:24:33.798881 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:24:34.130784 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7807): Launched 12:24:34.407634 run iperf3-srv_10.42.42.10(pid=7808): Launched 12:24:34.605139 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:24:34.739497 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:24:35.071396 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7809): Launched 12:24:35.346632 run iperf3-srv_10.42.42.10(pid=7810): Launched 12:24:35.544619 tst cs_paging_gprs_active.py:38: start network... 12:24:35.678623 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:24:36.183283 run create_hlr_db(pid=7811): Launched 12:24:36.369269 bus /sierra_2: Setting Powered False 12:24:37.391405 run create_hlr_db(pid=7811): Terminated: ok {rc=0} 12:24:37.818996 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7813): Launched 12:24:38.139401 run osmo-hlr_10.42.42.2(pid=7814): Launched 12:24:38.256325 run osmo-stp_10.42.42.5: Starting osmo-stp 12:24:38.810912 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7816): Launched 12:24:39.130954 run osmo-stp_10.42.42.5(pid=7817): Launched 12:24:39.248667 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:24:39.807921 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7819): Launched 12:24:39.922650 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:24:40.202566 run patchelf(pid=7820): Launched 12:24:40.390702 run osmo-stp_10.42.42.5(pid=7817): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7817)] 12:24:40.528020 run osmo-stp_10.42.42.5(pid=7817): stdout: | (launched: 2022-12-10_12:24:38.973368) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:24:40.666371 run osmo-stp_10.42.42.5(pid=7817): stderr: | �[0;m�[38;5;43m20221210122439166 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210122439166 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210122439166 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210122439167 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210122439167 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210122439167 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210122439167 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:24:40.799548 run osmo-stp_10.42.42.5(pid=7817): stdout: | (launched: 2022-12-10_12:24:38.973368) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:24:40.931267 run osmo-stp_10.42.42.5(pid=7817): stderr: | �[0;m�[38;5;43m20221210122439166 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210122439166 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210122439166 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210122439167 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210122439167 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210122439167 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210122439167 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:24:41.084683 run patchelf(pid=7820): Terminating (SIGINT) 12:24:41.264848 run patchelf(pid=7820): Terminated: ok {rc=0} 12:24:41.297974 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7817): Process ended prematurely: osmo-stp_10.42.42.5(pid=7817) [trial-2374↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7817)] [trial-2374↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 12:24:41.307793 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 12:24:41.370928 run osmo-hlr_10.42.42.2(pid=7814): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7814)] 12:24:41.422067 run osmo-hlr_10.42.42.2(pid=7814): stdout: | (launched: 2022-12-10_12:24:37.982203) 12:24:41.473595 run osmo-hlr_10.42.42.2(pid=7814): stderr: | �[0;m�[1;31m20221210122438180 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210122438180 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210122438180 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210122438180 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210122438180 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210122438180 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210122438192 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210122438200 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210122438200 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210122438200 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:24:41.517705 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7807): Terminating (SIGTERM) 12:24:41.559009 run iperf3-srv_10.42.42.10(pid=7808): Terminating (SIGTERM) 12:24:41.600928 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7809): Terminating (SIGTERM) 12:24:41.643127 run iperf3-srv_10.42.42.10(pid=7810): Terminating (SIGTERM) 12:24:41.684670 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7813): Terminating (SIGTERM) 12:24:41.726964 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7816): Terminating (SIGTERM) 12:24:41.768652 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7819): Terminating (SIGTERM) 12:24:41.778529 --- ParallelTerminationStrategy: PID 7807 died... 12:24:41.834857 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7807): Terminated: ok {rc=0} 12:24:41.845088 --- ParallelTerminationStrategy: PID 7808 died... 12:24:41.900490 run iperf3-srv_10.42.42.10(pid=7808): Terminated {rc=256} 12:24:41.910613 --- ParallelTerminationStrategy: PID 7809 died... 12:24:41.966044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7809): Terminated: ok {rc=0} 12:24:41.975924 --- ParallelTerminationStrategy: PID 7810 died... 12:24:42.031460 run iperf3-srv_10.42.42.10(pid=7810): Terminated {rc=256} 12:24:42.041916 --- ParallelTerminationStrategy: PID 7813 died... 12:24:42.097404 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7813): Terminated: ok {rc=0} 12:24:42.107636 --- ParallelTerminationStrategy: PID 7816 died... 12:24:42.163760 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7816): Terminated: ok {rc=0} 12:24:42.174066 --- ParallelTerminationStrategy: PID 7819 died... 12:24:42.230115 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7819): Terminated: ok {rc=0} 12:24:42.317843 bus /gobi_0: Setting Powered False 12:24:43.425051 bus /gobi_0: Setting Powered False 12:24:44.531737 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7817): Process ended prematurely: osmo-stp_10.42.42.5(pid=7817) [trial-2374↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7817)]