Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=1519): Process ended prematurely: osmo-stp_10.42.42.5(pid=1519) [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1519)]
Standard Output
---------------------------------------------- trial-2374 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 11:23:02.734804 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:02.746267 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:23:02.899286 tst cs_paging_gprs_active.py: using LAC 28048 11:23:03.029757 tst cs_paging_gprs_active.py: using RAC 253 11:23:03.159057 tst cs_paging_gprs_active.py: using CellId 28048 11:23:03.288020 tst cs_paging_gprs_active.py: using BVCI 28049 11:23:03.313565 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:03.324729 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:03.335911 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:03.347181 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:03.358211 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:03.369290 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:03.380428 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:03.391452 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:03.402826 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:23:03.523218 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:23:03.824569 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:23:03.964093 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:23:04.309209 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1509): Launched 11:23:04.596048 run iperf3-srv_10.42.42.10(pid=1510): Launched 11:23:04.799797 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:23:04.939385 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:23:05.283778 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1511): Launched 11:23:05.570870 run iperf3-srv_10.42.42.10(pid=1512): Launched 11:23:05.774690 tst cs_paging_gprs_active.py:38: start network... 11:23:05.913863 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:23:06.446386 run create_hlr_db(pid=1513): Launched 11:23:06.638419 bus /gobi_6: Setting Powered False 11:23:07.659891 run create_hlr_db(pid=1513): Terminated: ok {rc=0} 11:23:08.081035 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1515): Launched 11:23:08.396701 run osmo-hlr_10.42.42.2(pid=1516): Launched 11:23:08.516240 run osmo-stp_10.42.42.5: Starting osmo-stp 11:23:09.060404 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1518): Launched 11:23:09.373700 run osmo-stp_10.42.42.5(pid=1519): Launched 11:23:09.486714 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:23:10.033010 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1521): Launched 11:23:10.144692 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:23:10.421192 run patchelf(pid=1522): Launched 11:23:10.602795 run osmo-stp_10.42.42.5(pid=1519): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1519)] 11:23:10.735584 run osmo-stp_10.42.42.5(pid=1519): stdout: | (launched: 2022-12-10_11:23:09.218086) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:23:10.868629 run osmo-stp_10.42.42.5(pid=1519): stderr: | �[0;m�[38;5;43m20221210112309394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210112309394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210112309394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210112309394 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210112309395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210112309395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210112309395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:23:10.996480 run osmo-stp_10.42.42.5(pid=1519): stdout: | (launched: 2022-12-10_11:23:09.218086) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:23:11.123919 run osmo-stp_10.42.42.5(pid=1519): stderr: | �[0;m�[38;5;43m20221210112309394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210112309394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210112309394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210112309394 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210112309395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210112309395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210112309395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:23:11.271854 run patchelf(pid=1522): Terminating (SIGINT) 11:23:11.445846 run patchelf(pid=1522): Terminated: ok {rc=0} 11:23:11.477683 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1519): Process ended prematurely: osmo-stp_10.42.42.5(pid=1519) [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1519)] [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 11:23:11.486930 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 11:23:11.548052 run osmo-hlr_10.42.42.2(pid=1516): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1516)] 11:23:11.597751 run osmo-hlr_10.42.42.2(pid=1516): stdout: | (launched: 2022-12-10_11:23:08.239671) 11:23:11.647966 run osmo-hlr_10.42.42.2(pid=1516): stderr: | �[0;m�[1;31m20221210112308420 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210112308420 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210112308420 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210112308420 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210112308420 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210112308420 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210112308432 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210112308440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210112308441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210112308441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:23:11.691274 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1509): Terminating (SIGTERM) 11:23:11.731423 run iperf3-srv_10.42.42.10(pid=1510): Terminating (SIGTERM) 11:23:11.771773 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1511): Terminating (SIGTERM) 11:23:11.812132 run iperf3-srv_10.42.42.10(pid=1512): Terminating (SIGTERM) 11:23:11.852718 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1515): Terminating (SIGTERM) 11:23:11.893214 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1518): Terminating (SIGTERM) 11:23:11.933122 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1521): Terminating (SIGTERM) 11:23:11.942617 --- ParallelTerminationStrategy: PID 1509 died... 11:23:11.996267 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1509): Terminated: ok {rc=0} 11:23:12.006235 --- ParallelTerminationStrategy: PID 1510 died... 11:23:12.059665 run iperf3-srv_10.42.42.10(pid=1510): Terminated {rc=256} 11:23:12.069915 --- ParallelTerminationStrategy: PID 1511 died... 11:23:12.124052 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1511): Terminated: ok {rc=0} 11:23:12.133778 --- ParallelTerminationStrategy: PID 1512 died... 11:23:12.187286 run iperf3-srv_10.42.42.10(pid=1512): Terminated {rc=256} 11:23:12.197160 --- ParallelTerminationStrategy: PID 1515 died... 11:23:12.250551 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1515): Terminated: ok {rc=0} 11:23:12.260334 --- ParallelTerminationStrategy: PID 1518 died... 11:23:12.313819 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1518): Terminated: ok {rc=0} 11:23:12.323475 --- ParallelTerminationStrategy: PID 1521 died... 11:23:12.377187 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1521): Terminated: ok {rc=0} 11:23:12.461394 bus /gobi_0: Setting Powered False 11:23:13.569575 bus /gobi_0: Setting Powered False 11:23:14.678084 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1519): Process ended prematurely: osmo-stp_10.42.42.5(pid=1519) [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1519)]