Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=3196): Process ended prematurely: osmo-stp_10.42.42.5(pid=3196) [trial-2374↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3196)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:38:33.335747 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:38:33.347876 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:38:33.494825 tst cs_paging_gprs_active.py: using LAC 28131 11:38:33.624362 tst cs_paging_gprs_active.py: using RAC 81 11:38:33.752799 tst cs_paging_gprs_active.py: using CellId 28131 11:38:33.882082 tst cs_paging_gprs_active.py: using BVCI 28132 11:38:33.908680 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:38:33.920851 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:38:33.933011 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:38:33.945078 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:38:33.956810 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:38:33.968930 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:38:33.981823 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:38:33.993671 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:38:34.005949 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:38:34.130251 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:38:34.435775 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:38:34.575274 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:38:34.934872 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3186): Launched 11:38:35.239628 run iperf3-srv_10.42.42.10(pid=3187): Launched 11:38:35.446467 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:38:35.586691 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:38:35.947468 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3188): Launched 11:38:36.253547 run iperf3-srv_10.42.42.10(pid=3189): Launched 11:38:36.459587 tst cs_paging_gprs_active.py:38: start network... 11:38:36.598730 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:38:37.172662 run create_hlr_db(pid=3190): Launched 11:38:37.367795 bus /gobi_6: Setting Powered False 11:38:38.388028 run create_hlr_db(pid=3190): Terminated: ok {rc=0} 11:38:38.846975 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3192): Launched 11:38:39.285499 run osmo-hlr_10.42.42.2(pid=3193): Launched 11:38:39.534844 run osmo-stp_10.42.42.5: Starting osmo-stp 11:38:40.107726 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3195): Launched 11:38:40.407542 run osmo-stp_10.42.42.5(pid=3196): Launched 11:38:40.517150 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:38:41.040393 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3198): Launched 11:38:41.147392 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:38:41.408533 run patchelf(pid=3199): Launched 11:38:41.585122 run osmo-stp_10.42.42.5(pid=3196): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3196)] 11:38:41.714136 run osmo-stp_10.42.42.5(pid=3196): stdout: | (launched: 2022-12-10_11:38:40.260148) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:38:41.843662 run osmo-stp_10.42.42.5(pid=3196): stderr: | �[0;m�[38;5;43m20221210113840430 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210113840430 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210113840431 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210113840431 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210113840431 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210113840432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210113840432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:38:41.968250 run osmo-stp_10.42.42.5(pid=3196): stdout: | (launched: 2022-12-10_11:38:40.260148) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:38:42.091872 run osmo-stp_10.42.42.5(pid=3196): stderr: | �[0;m�[38;5;43m20221210113840430 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210113840430 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210113840431 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210113840431 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210113840431 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210113840432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210113840432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:38:42.235866 run patchelf(pid=3199): Terminating (SIGINT) 11:38:42.404907 run patchelf(pid=3199): Terminated: ok {rc=0} 11:38:42.436173 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3196): Process ended prematurely: osmo-stp_10.42.42.5(pid=3196) [trial-2374↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3196)] [trial-2374↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:38:42.445212 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 11:38:42.505637 run osmo-hlr_10.42.42.2(pid=3193): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3193)] 11:38:42.554450 run osmo-hlr_10.42.42.2(pid=3193): stdout: | (launched: 2022-12-10_11:38:39.017287) 11:38:42.603870 run osmo-hlr_10.42.42.2(pid=3193): stderr: | �[0;m�[1;31m20221210113839336 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210113839336 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210113839336 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210113839336 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210113839336 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210113839336 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210113839357 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210113839370 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210113839371 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210113839371 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:38:42.645509 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3186): Terminating (SIGTERM) 11:38:42.684825 run iperf3-srv_10.42.42.10(pid=3187): Terminating (SIGTERM) 11:38:42.724419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3188): Terminating (SIGTERM) 11:38:42.763947 run iperf3-srv_10.42.42.10(pid=3189): Terminating (SIGTERM) 11:38:42.803644 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3192): Terminating (SIGTERM) 11:38:42.843351 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3195): Terminating (SIGTERM) 11:38:42.882812 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3198): Terminating (SIGTERM) 11:38:42.892097 --- ParallelTerminationStrategy: PID 3186 died... 11:38:42.944554 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3186): Terminated: ok {rc=0} 11:38:42.954205 --- ParallelTerminationStrategy: PID 3187 died... 11:38:43.006691 run iperf3-srv_10.42.42.10(pid=3187): Terminated {rc=256} 11:38:43.016025 --- ParallelTerminationStrategy: PID 3188 died... 11:38:43.068245 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3188): Terminated: ok {rc=0} 11:38:43.077836 --- ParallelTerminationStrategy: PID 3189 died... 11:38:43.130145 run iperf3-srv_10.42.42.10(pid=3189): Terminated {rc=256} 11:38:43.139775 --- ParallelTerminationStrategy: PID 3192 died... 11:38:43.192306 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3192): Terminated: ok {rc=0} 11:38:43.201803 --- ParallelTerminationStrategy: PID 3195 died... 11:38:43.254601 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3195): Terminated: ok {rc=0} 11:38:43.264242 --- ParallelTerminationStrategy: PID 3198 died... 11:38:43.316851 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3198): Terminated: ok {rc=0} 11:38:43.405340 bus /gobi_0: Setting Powered False 11:38:44.506422 bus /gobi_0: Setting Powered False 11:38:45.617427 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3196): Process ended prematurely: osmo-stp_10.42.42.5(pid=3196) [trial-2374↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3196)]