Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=3889): Process ended prematurely: osmo-stp_10.42.42.5(pid=3889) [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3889)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 11:48:21.612812 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:21.624436 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:48:21.787803 tst cs_paging_gprs_active.py: using LAC 28183 11:48:21.911902 tst cs_paging_gprs_active.py: using RAC 133 11:48:22.036765 tst cs_paging_gprs_active.py: using CellId 28183 11:48:22.161756 tst cs_paging_gprs_active.py: using BVCI 28184 11:48:22.186498 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:22.197822 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:22.209042 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:22.220181 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:22.231314 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:22.242396 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:22.253691 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:22.264648 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:22.275872 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:48:22.390216 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:48:22.667330 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:48:22.792681 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:48:23.103546 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3879): Launched 11:48:23.361204 run iperf3-srv_10.42.42.10(pid=3880): Launched 11:48:23.543772 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:48:23.668253 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:48:23.978699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3881): Launched 11:48:24.236544 run iperf3-srv_10.42.42.10(pid=3882): Launched 11:48:24.419198 tst cs_paging_gprs_active.py:38: start network... 11:48:24.543729 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:48:25.015701 run create_hlr_db(pid=3883): Launched 11:48:25.189229 bus /gobi_6: Setting Powered False 11:48:26.210322 run create_hlr_db(pid=3883): Terminated: ok {rc=0} 11:48:26.638501 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3885): Launched 11:48:26.959821 run osmo-hlr_10.42.42.2(pid=3886): Launched 11:48:27.077333 run osmo-stp_10.42.42.5: Starting osmo-stp 11:48:27.635057 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3888): Launched 11:48:27.956774 run osmo-stp_10.42.42.5(pid=3889): Launched 11:48:28.073939 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:48:28.634943 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3891): Launched 11:48:28.749261 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:48:29.027956 run patchelf(pid=3892): Launched 11:48:29.215201 run osmo-stp_10.42.42.5(pid=3889): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3889)] 11:48:29.352442 run osmo-stp_10.42.42.5(pid=3889): stdout: | (launched: 2022-12-10_11:48:27.798857) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:48:29.489603 run osmo-stp_10.42.42.5(pid=3889): stderr: | �[0;m�[38;5;43m20221210114827991 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210114827992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210114827992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210114827992 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210114827993 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210114827993 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210114827993 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:48:29.622948 run osmo-stp_10.42.42.5(pid=3889): stdout: | (launched: 2022-12-10_11:48:27.798857) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:48:29.754369 run osmo-stp_10.42.42.5(pid=3889): stderr: | �[0;m�[38;5;43m20221210114827991 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210114827992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210114827992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210114827992 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210114827993 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210114827993 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210114827993 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:48:29.907229 run patchelf(pid=3892): Terminating (SIGINT) 11:48:30.086537 run patchelf(pid=3892): Terminated: ok {rc=0} 11:48:30.119539 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3889): Process ended prematurely: osmo-stp_10.42.42.5(pid=3889) [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3889)] [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 11:48:30.129394 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 11:48:30.192091 run osmo-hlr_10.42.42.2(pid=3886): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3886)] 11:48:30.242871 run osmo-hlr_10.42.42.2(pid=3886): stdout: | (launched: 2022-12-10_11:48:26.802708) 11:48:30.294350 run osmo-hlr_10.42.42.2(pid=3886): stderr: | �[0;m�[1;31m20221210114827002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210114827002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210114827002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210114827002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210114827002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210114827002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210114827013 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210114827021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210114827021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210114827021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:48:30.338311 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3879): Terminating (SIGTERM) 11:48:30.379521 run iperf3-srv_10.42.42.10(pid=3880): Terminating (SIGTERM) 11:48:30.420838 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3881): Terminating (SIGTERM) 11:48:30.462053 run iperf3-srv_10.42.42.10(pid=3882): Terminating (SIGTERM) 11:48:30.503266 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3885): Terminating (SIGTERM) 11:48:30.544482 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3888): Terminating (SIGTERM) 11:48:30.586221 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3891): Terminating (SIGTERM) 11:48:30.595750 --- ParallelTerminationStrategy: PID 3879 died... 11:48:30.651224 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3879): Terminated: ok {rc=0} 11:48:30.661208 --- ParallelTerminationStrategy: PID 3880 died... 11:48:30.716088 run iperf3-srv_10.42.42.10(pid=3880): Terminated {rc=256} 11:48:30.726022 --- ParallelTerminationStrategy: PID 3881 died... 11:48:30.780647 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3881): Terminated: ok {rc=0} 11:48:30.790503 --- ParallelTerminationStrategy: PID 3882 died... 11:48:30.852218 run iperf3-srv_10.42.42.10(pid=3882): Terminated {rc=256} 11:48:30.862604 --- ParallelTerminationStrategy: PID 3885 died... 11:48:30.931188 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3885): Terminated: ok {rc=0} 11:48:30.942246 --- ParallelTerminationStrategy: PID 3888 died... 11:48:31.004881 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3888): Terminated: ok {rc=0} 11:48:31.019677 --- ParallelTerminationStrategy: PID 3891 died... 11:48:31.080042 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3891): Terminated: ok {rc=0} 11:48:31.184731 bus /gobi_0: Setting Powered False 11:48:32.288232 bus /gobi_0: Setting Powered False 11:48:33.393170 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3889): Process ended prematurely: osmo-stp_10.42.42.5(pid=3889) [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3889)]