Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=4734): Process ended prematurely: osmo-stp_10.42.42.5(pid=4734) [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4734)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 11:56:34.641567 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:56:34.652334 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:56:34.807987 tst cs_paging_gprs_active.py: using LAC 28227 11:56:34.928416 tst cs_paging_gprs_active.py: using RAC 177 11:56:35.048124 tst cs_paging_gprs_active.py: using CellId 28227 11:56:35.181861 tst cs_paging_gprs_active.py: using BVCI 28228 11:56:35.206936 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:56:35.218383 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:56:35.229630 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:56:35.241309 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:56:35.253862 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:56:35.265797 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:56:35.277180 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:56:35.288713 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:56:35.300836 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:56:35.422533 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:56:35.703023 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:56:35.830090 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:56:36.145343 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4724): Launched 11:56:36.406990 run iperf3-srv_10.42.42.10(pid=4725): Launched 11:56:36.591785 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:56:36.718187 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:56:37.032086 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4726): Launched 11:56:37.292312 run iperf3-srv_10.42.42.10(pid=4727): Launched 11:56:37.476824 tst cs_paging_gprs_active.py:38: start network... 11:56:37.602871 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:56:38.079438 run create_hlr_db(pid=4728): Launched 11:56:38.253520 bus /gobi_6: Setting Powered False 11:56:39.275244 run create_hlr_db(pid=4728): Terminated: ok {rc=0} 11:56:39.706777 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4730): Launched 11:56:40.030556 run osmo-hlr_10.42.42.2(pid=4731): Launched 11:56:40.149730 run osmo-stp_10.42.42.5: Starting osmo-stp 11:56:40.710460 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4733): Launched 11:56:41.033896 run osmo-stp_10.42.42.5(pid=4734): Launched 11:56:41.150717 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:56:41.714582 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4736): Launched 11:56:41.830584 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:56:42.119887 run patchelf(pid=4737): Launched 11:56:42.309765 run osmo-stp_10.42.42.5(pid=4734): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4734)] 11:56:42.447916 run osmo-stp_10.42.42.5(pid=4734): stdout: | (launched: 2022-12-10_11:56:40.875043) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:56:42.586445 run osmo-stp_10.42.42.5(pid=4734): stderr: | �[0;m�[38;5;43m20221210115641067 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210115641067 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210115641067 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210115641068 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210115641068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210115641068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210115641068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:56:42.721355 run osmo-stp_10.42.42.5(pid=4734): stdout: | (launched: 2022-12-10_11:56:40.875043) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:56:42.853774 run osmo-stp_10.42.42.5(pid=4734): stderr: | �[0;m�[38;5;43m20221210115641067 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210115641067 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210115641067 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210115641068 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210115641068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210115641068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210115641068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:56:43.008515 run patchelf(pid=4737): Terminating (SIGINT) 11:56:43.189810 run patchelf(pid=4737): Terminated: ok {rc=0} 11:56:43.222980 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4734): Process ended prematurely: osmo-stp_10.42.42.5(pid=4734) [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4734)] [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 11:56:43.232768 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 11:56:43.295018 run osmo-hlr_10.42.42.2(pid=4731): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4731)] 11:56:43.345773 run osmo-hlr_10.42.42.2(pid=4731): stdout: | (launched: 2022-12-10_11:56:39.871939) 11:56:43.397190 run osmo-hlr_10.42.42.2(pid=4731): stderr: | �[0;m�[1;31m20221210115640071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210115640071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210115640071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210115640071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210115640071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210115640071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210115640084 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210115640092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210115640092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210115640092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:56:43.441234 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4724): Terminating (SIGTERM) 11:56:43.482670 run iperf3-srv_10.42.42.10(pid=4725): Terminating (SIGTERM) 11:56:43.524165 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4726): Terminating (SIGTERM) 11:56:43.565571 run iperf3-srv_10.42.42.10(pid=4727): Terminating (SIGTERM) 11:56:43.607017 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4730): Terminating (SIGTERM) 11:56:43.648397 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4733): Terminating (SIGTERM) 11:56:43.689892 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4736): Terminating (SIGTERM) 11:56:43.699598 --- ParallelTerminationStrategy: PID 4724 died... 11:56:43.755051 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4724): Terminated: ok {rc=0} 11:56:43.765332 --- ParallelTerminationStrategy: PID 4725 died... 11:56:43.820217 run iperf3-srv_10.42.42.10(pid=4725): Terminated {rc=256} 11:56:43.830129 --- ParallelTerminationStrategy: PID 4726 died... 11:56:43.885631 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4726): Terminated: ok {rc=0} 11:56:43.895736 --- ParallelTerminationStrategy: PID 4727 died... 11:56:43.950928 run iperf3-srv_10.42.42.10(pid=4727): Terminated {rc=256} 11:56:43.961111 --- ParallelTerminationStrategy: PID 4730 died... 11:56:44.016153 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4730): Terminated: ok {rc=0} 11:56:44.026355 --- ParallelTerminationStrategy: PID 4733 died... 11:56:44.081774 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4733): Terminated: ok {rc=0} 11:56:44.092049 --- ParallelTerminationStrategy: PID 4736 died... 11:56:44.147417 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4736): Terminated: ok {rc=0} 11:56:44.233624 bus /gobi_0: Setting Powered False 11:56:45.340109 bus /gobi_0: Setting Powered False 11:56:46.450778 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4734): Process ended prematurely: osmo-stp_10.42.42.5(pid=4734) [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4734)]