Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=8057): Process ended prematurely: osmo-stp_10.42.42.5(pid=8057) [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8057)]
Standard Output
---------------------------------------------- trial-2374 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 12:27:53.333942 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:53.349190 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 12:27:53.487799 tst iperf3m4.py: using LAC 28394 12:27:53.607569 tst iperf3m4.py: using RAC 89 12:27:53.726813 tst iperf3m4.py: using CellId 28394 12:27:53.844079 tst iperf3m4.py: using BVCI 28395 12:27:53.866987 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:53.878318 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:53.889649 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:53.901148 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:53.912531 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:53.923982 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:53.935691 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:53.947159 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:53.958888 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:27:54.077732 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:27:54.195489 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:27:54.313240 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:27:54.603945 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 12:27:54.737580 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:27:55.068239 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8043): Launched 12:27:55.341259 run iperf3-srv_10.42.42.10(pid=8044): Launched 12:27:55.536068 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 12:27:55.668671 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:27:55.997441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8045): Launched 12:27:56.268860 run iperf3-srv_10.42.42.10(pid=8046): Launched 12:27:56.463322 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 12:27:56.595556 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:27:56.924197 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8047): Launched 12:27:57.198014 run iperf3-srv_10.42.42.10(pid=8048): Launched 12:27:57.392336 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 12:27:57.525321 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:27:57.853359 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8049): Launched 12:27:58.126779 run iperf3-srv_10.42.42.10(pid=8050): Launched 12:27:58.321420 tst iperf3m4.py:8: start network... 12:27:58.454172 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:27:58.957780 run create_hlr_db(pid=8051): Launched 12:27:59.142638 bus /gobi_6: Setting Powered False 12:28:00.163982 run create_hlr_db(pid=8051): Terminated: ok {rc=0} 12:28:00.586923 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8053): Launched 12:28:01.004001 run osmo-hlr_10.42.42.2(pid=8054): Launched 12:28:01.156904 run osmo-stp_10.42.42.5: Starting osmo-stp 12:28:01.830440 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8056): Launched 12:28:02.247826 run osmo-stp_10.42.42.5(pid=8057): Launched 12:28:02.457814 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:28:02.980107 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8059): Launched 12:28:03.086040 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:28:03.345791 run patchelf(pid=8060): Launched 12:28:03.519759 run osmo-stp_10.42.42.5(pid=8057): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8057)] 12:28:03.646529 run osmo-stp_10.42.42.5(pid=8057): stdout: | (launched: 2022-12-10_12:28:01.989540) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:28:03.773767 run osmo-stp_10.42.42.5(pid=8057): stderr: | �[0;m�[38;5;43m20221210122802326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210122802326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210122802326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210122802327 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210122802327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210122802327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210122802327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:28:03.896141 run osmo-stp_10.42.42.5(pid=8057): stdout: | (launched: 2022-12-10_12:28:01.989540) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:28:04.017304 run osmo-stp_10.42.42.5(pid=8057): stderr: | �[0;m�[38;5;43m20221210122802326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210122802326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210122802326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210122802327 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210122802327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210122802327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210122802327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:28:04.159071 run patchelf(pid=8060): Terminating (SIGINT) 12:28:04.325947 run patchelf(pid=8060): Terminated: ok {rc=0} 12:28:04.356883 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8057): Process ended prematurely: osmo-stp_10.42.42.5(pid=8057) [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8057)] [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 12:28:04.366012 tst iperf3m4.py:8: Test FAILED (11.1 sec) 12:28:04.425071 run osmo-hlr_10.42.42.2(pid=8054): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8054)] 12:28:04.473317 run osmo-hlr_10.42.42.2(pid=8054): stdout: | (launched: 2022-12-10_12:28:00.749250) 12:28:04.522746 run osmo-hlr_10.42.42.2(pid=8054): stderr: | �[0;m�[1;31m20221210122801057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210122801057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210122801057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210122801058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210122801058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210122801058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210122801078 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210122801088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210122801094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210122801095 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:28:04.564223 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8043): Terminating (SIGTERM) 12:28:04.603280 run iperf3-srv_10.42.42.10(pid=8044): Terminating (SIGTERM) 12:28:04.641973 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8045): Terminating (SIGTERM) 12:28:04.680707 run iperf3-srv_10.42.42.10(pid=8046): Terminating (SIGTERM) 12:28:04.719503 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8047): Terminating (SIGTERM) 12:28:04.758498 run iperf3-srv_10.42.42.10(pid=8048): Terminating (SIGTERM) 12:28:04.797369 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8049): Terminating (SIGTERM) 12:28:04.836032 run iperf3-srv_10.42.42.10(pid=8050): Terminating (SIGTERM) 12:28:04.874916 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8053): Terminating (SIGTERM) 12:28:04.913733 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8056): Terminating (SIGTERM) 12:28:04.952639 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8059): Terminating (SIGTERM) 12:28:04.961771 --- ParallelTerminationStrategy: PID 8043 died... 12:28:05.014606 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8043): Terminated: ok {rc=0} 12:28:05.024089 --- ParallelTerminationStrategy: PID 8044 died... 12:28:05.076193 run iperf3-srv_10.42.42.10(pid=8044): Terminated {rc=256} 12:28:05.085878 --- ParallelTerminationStrategy: PID 8045 died... 12:28:05.138802 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8045): Terminated: ok {rc=0} 12:28:05.148306 --- ParallelTerminationStrategy: PID 8046 died... 12:28:05.200357 run iperf3-srv_10.42.42.10(pid=8046): Terminated {rc=256} 12:28:05.209821 --- ParallelTerminationStrategy: PID 8047 died... 12:28:05.261978 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8047): Terminated: ok {rc=0} 12:28:05.271415 --- ParallelTerminationStrategy: PID 8048 died... 12:28:05.323885 run iperf3-srv_10.42.42.10(pid=8048): Terminated {rc=256} 12:28:05.333525 --- ParallelTerminationStrategy: PID 8049 died... 12:28:05.385935 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8049): Terminated: ok {rc=0} 12:28:05.395509 --- ParallelTerminationStrategy: PID 8050 died... 12:28:05.447433 run iperf3-srv_10.42.42.10(pid=8050): Terminated {rc=256} 12:28:05.456866 --- ParallelTerminationStrategy: PID 8053 died... 12:28:05.509090 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8053): Terminated: ok {rc=0} 12:28:05.518523 --- ParallelTerminationStrategy: PID 8056 died... 12:28:05.570629 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8056): Terminated: ok {rc=0} 12:28:05.580152 --- ParallelTerminationStrategy: PID 8059 died... 12:28:05.632375 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8059): Terminated: ok {rc=0} 12:28:05.715123 bus /gobi_4: Setting Powered False 12:28:06.821693 bus /gobi_4: Setting Powered False 12:28:07.927911 bus /gobi_1: Setting Powered False 12:28:09.032598 bus /gobi_1: Setting Powered False 12:28:10.139090 bus /gobi_0: Setting Powered False 12:28:11.244339 bus /gobi_0: Setting Powered False 12:28:12.356033 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8057): Process ended prematurely: osmo-stp_10.42.42.5(pid=8057) [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8057)]