Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11067): Process ended prematurely: osmo-stp_10.42.42.5(pid=11067) [trial-2375↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11067)]
Standard Output
---------------------------------------------- trial-2375 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 12:58:51.567099 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:58:51.578178 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 12:58:51.727204 tst cs_paging_gprs_active.py: using LAC 28556 12:58:51.851482 tst cs_paging_gprs_active.py: using RAC 251 12:58:51.975929 tst cs_paging_gprs_active.py: using CellId 28556 12:58:52.100463 tst cs_paging_gprs_active.py: using BVCI 28557 12:58:52.124850 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:58:52.135872 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:58:52.146766 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:58:52.157608 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:58:52.168248 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:58:52.179642 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:58:52.190598 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:58:52.201443 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:58:52.212364 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:58:52.331888 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:58:52.621554 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:58:52.754795 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:58:53.082750 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11057): Launched 12:58:53.356201 run iperf3-srv_10.42.42.10(pid=11058): Launched 12:58:53.551352 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:58:53.684853 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:58:54.012789 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11059): Launched 12:58:54.285057 run iperf3-srv_10.42.42.10(pid=11060): Launched 12:58:54.479856 tst cs_paging_gprs_active.py:38: start network... 12:58:54.613222 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:58:55.123471 run create_hlr_db(pid=11061): Launched 12:58:55.307589 bus /gobi_6: Setting Powered False 12:58:56.328290 run create_hlr_db(pid=11061): Terminated: ok {rc=0} 12:58:56.729863 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11063): Launched 12:58:57.035475 run osmo-hlr_10.42.42.2(pid=11064): Launched 12:58:57.153085 run osmo-stp_10.42.42.5: Starting osmo-stp 12:58:57.707510 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11066): Launched 12:58:58.026656 run osmo-stp_10.42.42.5(pid=11067): Launched 12:58:58.142680 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:58:58.699296 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11069): Launched 12:58:58.814034 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:58:59.090817 run patchelf(pid=11070): Launched 12:58:59.277232 run osmo-stp_10.42.42.5(pid=11067): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11067)] 12:58:59.413712 run osmo-stp_10.42.42.5(pid=11067): stdout: | (launched: 2022-12-10_12:58:57.870888) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:58:59.550337 run osmo-stp_10.42.42.5(pid=11067): stderr: | �[0;m�[38;5;43m20221210125858064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125858064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125858064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125858064 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125858065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125858065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125858065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:58:59.682640 run osmo-stp_10.42.42.5(pid=11067): stdout: | (launched: 2022-12-10_12:58:57.870888) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:58:59.814635 run osmo-stp_10.42.42.5(pid=11067): stderr: | �[0;m�[38;5;43m20221210125858064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125858064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125858064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125858064 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125858065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125858065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125858065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:58:59.966584 run patchelf(pid=11070): Terminating (SIGINT) 12:59:00.144790 run patchelf(pid=11070): Terminated: ok {rc=0} 12:59:00.177576 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11067): Process ended prematurely: osmo-stp_10.42.42.5(pid=11067) [trial-2375↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11067)] [trial-2375↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 12:59:00.187252 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 12:59:00.249282 run osmo-hlr_10.42.42.2(pid=11064): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11064)] 12:59:00.300040 run osmo-hlr_10.42.42.2(pid=11064): stdout: | (launched: 2022-12-10_12:58:56.881633) 12:59:00.351656 run osmo-hlr_10.42.42.2(pid=11064): stderr: | �[0;m�[1;31m20221210125857076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210125857076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210125857076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210125857076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210125857076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210125857076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210125857089 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210125857097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210125857097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210125857097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:59:00.395295 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11057): Terminating (SIGTERM) 12:59:00.436382 run iperf3-srv_10.42.42.10(pid=11058): Terminating (SIGTERM) 12:59:00.477765 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11059): Terminating (SIGTERM) 12:59:00.519021 run iperf3-srv_10.42.42.10(pid=11060): Terminating (SIGTERM) 12:59:00.560239 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11063): Terminating (SIGTERM) 12:59:00.601294 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11066): Terminating (SIGTERM) 12:59:00.642226 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11069): Terminating (SIGTERM) 12:59:00.651629 --- ParallelTerminationStrategy: PID 11057 died... 12:59:00.706594 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11057): Terminated: ok {rc=0} 12:59:00.716276 --- ParallelTerminationStrategy: PID 11058 died... 12:59:00.770554 run iperf3-srv_10.42.42.10(pid=11058): Terminated {rc=256} 12:59:00.780262 --- ParallelTerminationStrategy: PID 11059 died... 12:59:00.841067 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11059): Terminated: ok {rc=0} 12:59:00.858373 --- ParallelTerminationStrategy: PID 11060 died... 12:59:00.925386 run iperf3-srv_10.42.42.10(pid=11060): Terminated {rc=256} 12:59:00.935742 --- ParallelTerminationStrategy: PID 11063 died... 12:59:00.991300 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11063): Terminated: ok {rc=0} 12:59:01.003972 --- ParallelTerminationStrategy: PID 11066 died... 12:59:01.060355 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11066): Terminated: ok {rc=0} 12:59:01.070704 --- ParallelTerminationStrategy: PID 11069 died... 12:59:01.126588 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11069): Terminated: ok {rc=0} 12:59:01.212405 bus /gobi_0: Setting Powered False 12:59:02.312759 bus /gobi_0: Setting Powered False 12:59:03.418398 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11067): Process ended prematurely: osmo-stp_10.42.42.5(pid=11067) [trial-2375↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11067)]