Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=12007): Process ended prematurely: osmo-stp_10.42.42.5(pid=12007) [trial-2375↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12007)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 13:08:20.351350 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:08:20.363505 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 13:08:20.507063 tst cs_paging_gprs_active.py: using LAC 28607 13:08:20.628183 tst cs_paging_gprs_active.py: using RAC 47 13:08:20.749323 tst cs_paging_gprs_active.py: using CellId 28607 13:08:20.876575 tst cs_paging_gprs_active.py: using BVCI 28608 13:08:20.900790 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:08:20.913437 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:08:20.926457 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:08:20.939375 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:08:20.951249 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:08:20.965094 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:08:20.978780 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:08:20.991746 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:08:21.005115 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:08:21.126237 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:08:21.408883 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:08:21.540271 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:08:21.883983 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11997): Launched 13:08:22.171330 run iperf3-srv_10.42.42.10(pid=11998): Launched 13:08:22.359770 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:08:22.492596 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:08:22.827693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11999): Launched 13:08:23.108306 run iperf3-srv_10.42.42.10(pid=12000): Launched 13:08:23.295644 tst cs_paging_gprs_active.py:38: start network... 13:08:23.424209 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:08:23.961566 run create_hlr_db(pid=12001): Launched 13:08:24.141325 bus /gobi_6: Setting Powered False 13:08:25.164407 run create_hlr_db(pid=12001): Terminated: ok {rc=0} 13:08:25.597506 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12003): Launched 13:08:26.011461 run osmo-hlr_10.42.42.2(pid=12004): Launched 13:08:26.236446 run osmo-stp_10.42.42.5: Starting osmo-stp 13:08:26.904674 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12006): Launched 13:08:27.329298 run osmo-stp_10.42.42.5(pid=12007): Launched 13:08:27.542685 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:08:28.128392 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12009): Launched 13:08:28.246462 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:08:28.547667 run patchelf(pid=12010): Launched 13:08:28.738550 run osmo-stp_10.42.42.5(pid=12007): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12007)] 13:08:28.878286 run osmo-stp_10.42.42.5(pid=12007): stdout: | (launched: 2022-12-10_13:08:27.063338) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:08:29.019203 run osmo-stp_10.42.42.5(pid=12007): stderr: | �[0;m�[38;5;43m20221210130827359 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130827359 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130827359 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130827360 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130827360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130827360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130827360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:08:29.155251 run osmo-stp_10.42.42.5(pid=12007): stdout: | (launched: 2022-12-10_13:08:27.063338) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:08:29.290058 run osmo-stp_10.42.42.5(pid=12007): stderr: | �[0;m�[38;5;43m20221210130827359 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130827359 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130827359 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130827360 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130827360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130827360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130827360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:08:29.446577 run patchelf(pid=12010): Terminating (SIGINT) 13:08:29.630207 run patchelf(pid=12010): Terminated: ok {rc=0} 13:08:29.664603 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12007): Process ended prematurely: osmo-stp_10.42.42.5(pid=12007) [trial-2375↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12007)] [trial-2375↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 13:08:29.675667 tst cs_paging_gprs_active.py:38: Test FAILED (9.4 sec) 13:08:29.740875 run osmo-hlr_10.42.42.2(pid=12004): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12004)] 13:08:29.794112 run osmo-hlr_10.42.42.2(pid=12004): stdout: | (launched: 2022-12-10_13:08:25.755079) 13:08:29.847830 run osmo-hlr_10.42.42.2(pid=12004): stderr: | �[0;m�[1;31m20221210130826103 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210130826103 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210130826103 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210130826103 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210130826103 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210130826103 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210130826123 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210130826132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210130826132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210130826132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:08:29.893730 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11997): Terminating (SIGTERM) 13:08:29.936760 run iperf3-srv_10.42.42.10(pid=11998): Terminating (SIGTERM) 13:08:29.980187 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11999): Terminating (SIGTERM) 13:08:30.023791 run iperf3-srv_10.42.42.10(pid=12000): Terminating (SIGTERM) 13:08:30.069015 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12003): Terminating (SIGTERM) 13:08:30.112684 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12006): Terminating (SIGTERM) 13:08:30.156138 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12009): Terminating (SIGTERM) 13:08:30.167071 --- ParallelTerminationStrategy: PID 11997 died... 13:08:30.226181 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11997): Terminated: ok {rc=0} 13:08:30.237233 --- ParallelTerminationStrategy: PID 11998 died... 13:08:30.294731 run iperf3-srv_10.42.42.10(pid=11998): Terminated {rc=256} 13:08:30.305399 --- ParallelTerminationStrategy: PID 11999 died... 13:08:30.362624 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11999): Terminated: ok {rc=0} 13:08:30.373211 --- ParallelTerminationStrategy: PID 12000 died... 13:08:30.429895 run iperf3-srv_10.42.42.10(pid=12000): Terminated {rc=256} 13:08:30.440412 --- ParallelTerminationStrategy: PID 12003 died... 13:08:30.497196 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12003): Terminated: ok {rc=0} 13:08:30.507862 --- ParallelTerminationStrategy: PID 12006 died... 13:08:30.564797 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12006): Terminated: ok {rc=0} 13:08:30.575523 --- ParallelTerminationStrategy: PID 12009 died... 13:08:30.632919 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12009): Terminated: ok {rc=0} 13:08:30.722728 bus /gobi_0: Setting Powered False 13:08:31.882026 bus /gobi_0: Setting Powered False 13:08:32.999761 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12007): Process ended prematurely: osmo-stp_10.42.42.5(pid=12007) [trial-2375↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12007)]