Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=11458): Process ended prematurely: osmo-stp_10.42.42.5(pid=11458) [trial-2375↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11458)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 13:04:22.587509 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:04:22.598311 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 13:04:22.742708 tst cs_paging_gprs_active.py: using LAC 28587 13:04:22.866762 tst cs_paging_gprs_active.py: using RAC 27 13:04:22.990561 tst cs_paging_gprs_active.py: using CellId 28587 13:04:23.111568 tst cs_paging_gprs_active.py: using BVCI 28588 13:04:23.134824 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:04:23.145442 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:04:23.155759 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:04:23.166457 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:04:23.177393 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:04:23.188103 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:04:23.199409 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:04:23.209474 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:04:23.219981 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 13:04:23.334915 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 13:04:23.626178 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:04:23.759402 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:04:24.089426 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11448): Launched 13:04:24.363686 run iperf3-srv_10.42.42.10(pid=11449): Launched 13:04:24.559449 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:04:24.692819 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:04:25.023267 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11450): Launched 13:04:25.297691 run iperf3-srv_10.42.42.10(pid=11451): Launched 13:04:25.492936 tst cs_paging_gprs_active.py:38: start network... 13:04:25.626703 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:04:26.138763 run create_hlr_db(pid=11452): Launched 13:04:26.324086 bus /sierra_2: Setting Powered False 13:04:27.345344 run create_hlr_db(pid=11452): Terminated: ok {rc=0} 13:04:27.746699 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11454): Launched 13:04:28.046620 run osmo-hlr_10.42.42.2(pid=11455): Launched 13:04:28.161475 run osmo-stp_10.42.42.5: Starting osmo-stp 13:04:28.693700 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11457): Launched 13:04:28.994727 run osmo-stp_10.42.42.5(pid=11458): Launched 13:04:29.106272 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:04:29.631327 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11460): Launched 13:04:29.739106 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:04:30.001081 run patchelf(pid=11461): Launched 13:04:30.177414 run osmo-stp_10.42.42.5(pid=11458): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11458)] 13:04:30.306161 run osmo-stp_10.42.42.5(pid=11458): stdout: | (launched: 2022-12-10_13:04:28.846642) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:04:30.435608 run osmo-stp_10.42.42.5(pid=11458): stderr: | �[0;m�[38;5;43m20221210130429015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130429015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130429015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130429016 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130429016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130429016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130429017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:04:30.560053 run osmo-stp_10.42.42.5(pid=11458): stdout: | (launched: 2022-12-10_13:04:28.846642) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:04:30.683611 run osmo-stp_10.42.42.5(pid=11458): stderr: | �[0;m�[38;5;43m20221210130429015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130429015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130429015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130429016 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130429016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130429016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130429017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:04:30.828227 run patchelf(pid=11461): Terminating (SIGINT) 13:04:31.019294 run patchelf(pid=11461): Terminated: ok {rc=0} 13:04:31.051699 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11458): Process ended prematurely: osmo-stp_10.42.42.5(pid=11458) [trial-2375↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11458)] [trial-2375↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 13:04:31.061828 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 13:04:31.125092 run osmo-hlr_10.42.42.2(pid=11455): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11455)] 13:04:31.175363 run osmo-hlr_10.42.42.2(pid=11455): stdout: | (launched: 2022-12-10_13:04:27.899579) 13:04:31.226048 run osmo-hlr_10.42.42.2(pid=11455): stderr: | �[0;m�[1;31m20221210130428075 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210130428075 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210130428075 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210130428075 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210130428075 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210130428075 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210130428087 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210130428096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210130428096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210130428096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:04:31.270199 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11448): Terminating (SIGTERM) 13:04:31.314094 run iperf3-srv_10.42.42.10(pid=11449): Terminating (SIGTERM) 13:04:31.357922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11450): Terminating (SIGTERM) 13:04:31.402351 run iperf3-srv_10.42.42.10(pid=11451): Terminating (SIGTERM) 13:04:31.446278 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11454): Terminating (SIGTERM) 13:04:31.487122 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11457): Terminating (SIGTERM) 13:04:31.528892 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11460): Terminating (SIGTERM) 13:04:31.539142 --- ParallelTerminationStrategy: PID 11448 died... 13:04:31.594589 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11448): Terminated: ok {rc=0} 13:04:31.605056 --- ParallelTerminationStrategy: PID 11449 died... 13:04:31.659891 run iperf3-srv_10.42.42.10(pid=11449): Terminated {rc=256} 13:04:31.670238 --- ParallelTerminationStrategy: PID 11450 died... 13:04:31.725390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11450): Terminated: ok {rc=0} 13:04:31.735710 --- ParallelTerminationStrategy: PID 11451 died... 13:04:31.790620 run iperf3-srv_10.42.42.10(pid=11451): Terminated {rc=256} 13:04:31.801027 --- ParallelTerminationStrategy: PID 11454 died... 13:04:31.854957 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11454): Terminated: ok {rc=0} 13:04:31.866082 --- ParallelTerminationStrategy: PID 11457 died... 13:04:31.921222 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11457): Terminated: ok {rc=0} 13:04:31.931736 --- ParallelTerminationStrategy: PID 11460 died... 13:04:31.987099 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11460): Terminated: ok {rc=0} 13:04:32.071853 bus /gobi_0: Setting Powered False 13:04:33.171428 bus /gobi_0: Setting Powered False 13:04:34.277976 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11458): Process ended prematurely: osmo-stp_10.42.42.5(pid=11458) [trial-2375↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11458)]