Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12555): Process ended prematurely: osmo-stp_10.42.42.5(pid=12555) [trial-2375↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12555)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 13:16:06.161700 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:16:06.173052 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:16:06.333906 tst cs_paging_gprs_active.py: using LAC 28649 13:16:06.452727 tst cs_paging_gprs_active.py: using RAC 89 13:16:06.572500 tst cs_paging_gprs_active.py: using CellId 28649 13:16:06.692813 tst cs_paging_gprs_active.py: using BVCI 28650 13:16:06.715973 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:16:06.726978 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:16:06.737814 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:16:06.748613 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:16:06.759905 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:16:06.771003 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:16:06.782200 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:16:06.793659 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:16:06.804598 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:16:06.925240 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:16:07.202624 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:16:07.327819 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:16:07.638205 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12545): Launched 13:16:07.896309 run iperf3-srv_10.42.42.10(pid=12546): Launched 13:16:08.078794 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:16:08.204070 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:16:08.515223 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12547): Launched 13:16:08.773613 run iperf3-srv_10.42.42.10(pid=12548): Launched 13:16:08.957213 tst cs_paging_gprs_active.py:38: start network... 13:16:09.082368 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:16:09.553710 run create_hlr_db(pid=12549): Launched 13:16:09.725901 bus /gobi_6: Setting Powered False 13:16:10.747663 run create_hlr_db(pid=12549): Terminated: ok {rc=0} 13:16:11.171531 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12551): Launched 13:16:11.491717 run osmo-hlr_10.42.42.2(pid=12552): Launched 13:16:11.610222 run osmo-stp_10.42.42.5: Starting osmo-stp 13:16:12.163638 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12554): Launched 13:16:12.483961 run osmo-stp_10.42.42.5(pid=12555): Launched 13:16:12.600624 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:16:13.156886 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12557): Launched 13:16:13.271284 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:16:13.548768 run patchelf(pid=12558): Launched 13:16:13.734952 run osmo-stp_10.42.42.5(pid=12555): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12555)] 13:16:13.870774 run osmo-stp_10.42.42.5(pid=12555): stdout: | (launched: 2022-12-10_13:16:12.327272) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:16:14.007837 run osmo-stp_10.42.42.5(pid=12555): stderr: | �[0;m�[38;5;43m20221210131612517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210131612517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210131612517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210131612518 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210131612518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210131612518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210131612518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:16:14.139875 run osmo-stp_10.42.42.5(pid=12555): stdout: | (launched: 2022-12-10_13:16:12.327272) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:16:14.271113 run osmo-stp_10.42.42.5(pid=12555): stderr: | �[0;m�[38;5;43m20221210131612517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210131612517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210131612517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210131612518 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210131612518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210131612518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210131612518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:16:14.423497 run patchelf(pid=12558): Terminating (SIGINT) 13:16:14.602134 run patchelf(pid=12558): Terminated: ok {rc=0} 13:16:14.635013 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12555): Process ended prematurely: osmo-stp_10.42.42.5(pid=12555) [trial-2375↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12555)] [trial-2375↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 13:16:14.644791 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 13:16:14.707012 run osmo-hlr_10.42.42.2(pid=12552): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12552)] 13:16:14.757552 run osmo-hlr_10.42.42.2(pid=12552): stdout: | (launched: 2022-12-10_13:16:11.335140) 13:16:14.808789 run osmo-hlr_10.42.42.2(pid=12552): stderr: | �[0;m�[1;31m20221210131611532 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210131611532 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210131611532 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210131611532 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210131611532 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210131611532 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210131611547 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210131611555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210131611555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210131611555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:16:14.852494 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12545): Terminating (SIGTERM) 13:16:14.893752 run iperf3-srv_10.42.42.10(pid=12546): Terminating (SIGTERM) 13:16:14.934941 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12547): Terminating (SIGTERM) 13:16:14.975990 run iperf3-srv_10.42.42.10(pid=12548): Terminating (SIGTERM) 13:16:15.017223 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12551): Terminating (SIGTERM) 13:16:15.058372 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12554): Terminating (SIGTERM) 13:16:15.099501 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12557): Terminating (SIGTERM) 13:16:15.108906 --- ParallelTerminationStrategy: PID 12545 died... 13:16:15.164070 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12545): Terminated: ok {rc=0} 13:16:15.174015 --- ParallelTerminationStrategy: PID 12546 died... 13:16:15.228742 run iperf3-srv_10.42.42.10(pid=12546): Terminated {rc=256} 13:16:15.238961 --- ParallelTerminationStrategy: PID 12547 died... 13:16:15.293582 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12547): Terminated: ok {rc=0} 13:16:15.303382 --- ParallelTerminationStrategy: PID 12548 died... 13:16:15.358173 run iperf3-srv_10.42.42.10(pid=12548): Terminated {rc=256} 13:16:15.367999 --- ParallelTerminationStrategy: PID 12551 died... 13:16:15.422666 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12551): Terminated: ok {rc=0} 13:16:15.432500 --- ParallelTerminationStrategy: PID 12554 died... 13:16:15.487320 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12554): Terminated: ok {rc=0} 13:16:15.497240 --- ParallelTerminationStrategy: PID 12557 died... 13:16:15.551999 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12557): Terminated: ok {rc=0} 13:16:15.637183 bus /gobi_0: Setting Powered False 13:16:16.746700 bus /gobi_0: Setting Powered False 13:16:17.858031 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12555): Process ended prematurely: osmo-stp_10.42.42.5(pid=12555) [trial-2375↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12555)]