Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=25566): Process ended prematurely: osmo-stp_10.42.42.5(pid=25566) [trial-2376↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25566)]
Standard Output
---------------------------------------------- trial-2376 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 16:40:01.934084 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:40:01.950278 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 16:40:02.107572 tst cs_paging_gprs_active.py: using LAC 29266 16:40:02.245071 tst cs_paging_gprs_active.py: using RAC 196 16:40:02.372764 tst cs_paging_gprs_active.py: using CellId 29266 16:40:02.497016 tst cs_paging_gprs_active.py: using BVCI 29267 16:40:02.521358 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:40:02.532361 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:40:02.543325 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:40:02.554265 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:40:02.565234 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:40:02.576072 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:40:02.587326 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:40:02.598215 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:40:02.609292 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 16:40:02.729764 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 16:40:03.023085 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:40:03.155858 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:40:03.484509 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25556): Launched 16:40:03.756495 run iperf3-srv_10.42.42.10(pid=25557): Launched 16:40:03.951256 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:40:04.083654 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:40:04.411710 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25558): Launched 16:40:04.684082 run iperf3-srv_10.42.42.10(pid=25559): Launched 16:40:04.878771 tst cs_paging_gprs_active.py:38: start network... 16:40:05.011591 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:40:05.518215 run create_hlr_db(pid=25560): Launched 16:40:05.701394 bus /sierra_2: Setting Powered False 16:40:06.723332 run create_hlr_db(pid=25560): Terminated: ok {rc=0} 16:40:07.121943 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25562): Launched 16:40:07.418968 run osmo-hlr_10.42.42.2(pid=25563): Launched 16:40:07.532294 run osmo-stp_10.42.42.5: Starting osmo-stp 16:40:08.054902 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25565): Launched 16:40:08.351419 run osmo-stp_10.42.42.5(pid=25566): Launched 16:40:08.459950 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:40:08.977268 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25568): Launched 16:40:09.083523 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:40:09.342659 run patchelf(pid=25569): Launched 16:40:09.517366 run osmo-stp_10.42.42.5(pid=25566): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25566)] 16:40:09.645407 run osmo-stp_10.42.42.5(pid=25566): stdout: | (launched: 2022-12-10_16:40:08.205630) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:40:09.773878 run osmo-stp_10.42.42.5(pid=25566): stderr: | �[0;m�[38;5;43m20221210164008373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210164008373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210164008374 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210164008374 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210164008375 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210164008375 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210164008375 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:40:09.897228 run osmo-stp_10.42.42.5(pid=25566): stdout: | (launched: 2022-12-10_16:40:08.205630) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:40:10.019638 run osmo-stp_10.42.42.5(pid=25566): stderr: | �[0;m�[38;5;43m20221210164008373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210164008373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210164008374 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210164008374 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210164008375 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210164008375 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210164008375 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:40:10.162422 run patchelf(pid=25569): Terminating (SIGINT) 16:40:10.330570 run patchelf(pid=25569): Terminated: ok {rc=0} 16:40:10.361398 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25566): Process ended prematurely: osmo-stp_10.42.42.5(pid=25566) [trial-2376↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25566)] [trial-2376↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 16:40:10.370515 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 16:40:10.430671 run osmo-hlr_10.42.42.2(pid=25563): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25563)] 16:40:10.479301 run osmo-hlr_10.42.42.2(pid=25563): stdout: | (launched: 2022-12-10_16:40:07.272654) 16:40:10.528825 run osmo-hlr_10.42.42.2(pid=25563): stderr: | �[0;m�[1;31m20221210164007446 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210164007446 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210164007446 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210164007446 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210164007446 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210164007446 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210164007458 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210164007466 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210164007467 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210164007467 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:40:10.570936 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25556): Terminating (SIGTERM) 16:40:10.610635 run iperf3-srv_10.42.42.10(pid=25557): Terminating (SIGTERM) 16:40:10.650350 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25558): Terminating (SIGTERM) 16:40:10.690045 run iperf3-srv_10.42.42.10(pid=25559): Terminating (SIGTERM) 16:40:10.729594 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25562): Terminating (SIGTERM) 16:40:10.769133 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25565): Terminating (SIGTERM) 16:40:10.809362 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25568): Terminating (SIGTERM) 16:40:10.818863 --- ParallelTerminationStrategy: PID 25556 died... 16:40:10.872186 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25556): Terminated: ok {rc=0} 16:40:10.882032 --- ParallelTerminationStrategy: PID 25557 died... 16:40:10.934705 run iperf3-srv_10.42.42.10(pid=25557): Terminated {rc=256} 16:40:10.944432 --- ParallelTerminationStrategy: PID 25558 died... 16:40:10.997780 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25558): Terminated: ok {rc=0} 16:40:11.007601 --- ParallelTerminationStrategy: PID 25559 died... 16:40:11.060555 run iperf3-srv_10.42.42.10(pid=25559): Terminated {rc=256} 16:40:11.070393 --- ParallelTerminationStrategy: PID 25562 died... 16:40:11.123599 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25562): Terminated: ok {rc=0} 16:40:11.133184 --- ParallelTerminationStrategy: PID 25565 died... 16:40:11.186562 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25565): Terminated: ok {rc=0} 16:40:11.196065 --- ParallelTerminationStrategy: PID 25568 died... 16:40:11.249549 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25568): Terminated: ok {rc=0} 16:40:11.332386 bus /gobi_0: Setting Powered False 16:40:12.438055 bus /gobi_0: Setting Powered False 16:40:13.544907 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25566): Process ended prematurely: osmo-stp_10.42.42.5(pid=25566) [trial-2376↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25566)]