Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=741): Process ended prematurely: osmo-stp_10.42.42.5(pid=741) [trial-2379↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=741)]
Standard Output
---------------------------------------------- trial-2379 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 17:19:34.929085 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:34.941727 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 17:19:35.081974 tst iperf3.py: using LAC 30351 17:19:35.207144 tst iperf3.py: using RAC 6 17:19:35.334812 tst iperf3.py: using CellId 30351 17:19:35.459989 tst iperf3.py: using BVCI 30352 17:19:35.484699 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:35.496610 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:35.508234 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:35.519881 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:35.531690 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:35.543386 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:35.555184 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:35.566766 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:35.579139 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 17:19:35.858085 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 17:19:35.982485 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:19:36.292575 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=733): Launched 17:19:36.550579 run iperf3-srv_10.42.42.10(pid=734): Launched 17:19:36.731765 tst iperf3.py:8: start network... 17:19:36.855946 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:19:37.330843 run create_hlr_db(pid=735): Launched 17:19:37.502274 bus /gobi_6: Setting Powered False 17:19:38.523958 run create_hlr_db(pid=735): Terminated: ok {rc=0} 17:19:38.927366 run pcap-recorder_any(filters='host 10.42.42.2')(pid=737): Launched 17:19:39.227646 run osmo-hlr_10.42.42.2(pid=738): Launched 17:19:39.347814 run osmo-stp_10.42.42.5: Starting osmo-stp 17:19:39.874980 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=740): Launched 17:19:40.176156 run osmo-stp_10.42.42.5(pid=741): Launched 17:19:40.286055 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:19:40.809831 run pcap-recorder_any(filters='host 10.42.42.6')(pid=743): Launched 17:19:40.916573 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:19:41.179164 run patchelf(pid=744): Launched 17:19:41.355562 run osmo-stp_10.42.42.5(pid=741): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=741)] 17:19:41.484397 run osmo-stp_10.42.42.5(pid=741): stdout: | (launched: 2022-12-12_17:19:40.027013) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:19:41.613821 run osmo-stp_10.42.42.5(pid=741): stderr: | �[0;m�[38;5;43m20221212171940194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212171940194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212171940194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212171940195 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212171940195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212171940195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212171940195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:19:41.738419 run osmo-stp_10.42.42.5(pid=741): stdout: | (launched: 2022-12-12_17:19:40.027013) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:19:41.862238 run osmo-stp_10.42.42.5(pid=741): stderr: | �[0;m�[38;5;43m20221212171940194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212171940194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212171940194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212171940195 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212171940195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212171940195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212171940195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:19:42.006029 run patchelf(pid=744): Terminating (SIGINT) 17:19:42.174052 run patchelf(pid=744): Terminated: ok {rc=0} 17:19:42.205130 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=741): Process ended prematurely: osmo-stp_10.42.42.5(pid=741) [trial-2379↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=741)] [trial-2379↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 17:19:42.214507 tst iperf3.py:8: Test FAILED (7.3 sec) 17:19:42.274472 run osmo-hlr_10.42.42.2(pid=738): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=738)] 17:19:42.322871 run osmo-hlr_10.42.42.2(pid=738): stdout: | (launched: 2022-12-12_17:19:39.079122) 17:19:42.373033 run osmo-hlr_10.42.42.2(pid=738): stderr: | �[0;m�[1;31m20221212171939252 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212171939252 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212171939252 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212171939252 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212171939252 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212171939253 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212171939269 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212171939279 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212171939279 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212171939279 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:19:42.414541 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=733): Terminating (SIGTERM) 17:19:42.453927 run iperf3-srv_10.42.42.10(pid=734): Terminating (SIGTERM) 17:19:42.493482 run pcap-recorder_any(filters='host 10.42.42.2')(pid=737): Terminating (SIGTERM) 17:19:42.532825 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=740): Terminating (SIGTERM) 17:19:42.572259 run pcap-recorder_any(filters='host 10.42.42.6')(pid=743): Terminating (SIGTERM) 17:19:42.581601 --- ParallelTerminationStrategy: PID 733 died... 17:19:42.634090 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=733): Terminated: ok {rc=0} 17:19:42.643461 --- ParallelTerminationStrategy: PID 734 died... 17:19:42.695836 run iperf3-srv_10.42.42.10(pid=734): Terminated {rc=256} 17:19:42.705440 --- ParallelTerminationStrategy: PID 737 died... 17:19:42.757517 run pcap-recorder_any(filters='host 10.42.42.2')(pid=737): Terminated: ok {rc=0} 17:19:42.767189 --- ParallelTerminationStrategy: PID 740 died... 17:19:42.819293 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=740): Terminated: ok {rc=0} 17:19:42.829174 --- ParallelTerminationStrategy: PID 743 died... 17:19:42.881301 run pcap-recorder_any(filters='host 10.42.42.6')(pid=743): Terminated: ok {rc=0} 17:19:42.969175 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=741): Process ended prematurely: osmo-stp_10.42.42.5(pid=741) [trial-2379↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=741)]