Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=576): Process ended prematurely: osmo-stp_10.42.42.5(pid=576) [trial-2379↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=576)]
Standard Output
---------------------------------------------- trial-2379 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 17:17:13.393737 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:17:13.405533 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 17:17:13.547413 tst ping_idle_ping.py: using LAC 30339 17:17:13.671079 tst ping_idle_ping.py: using RAC 249 17:17:13.795115 tst ping_idle_ping.py: using CellId 30339 17:17:13.925861 tst ping_idle_ping.py: using BVCI 30340 17:17:13.950264 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:17:13.961511 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:17:13.972380 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:17:13.983338 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:17:13.994284 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:17:14.005214 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:17:14.016332 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:17:14.027377 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 17:17:14.297226 tst ping_idle_ping.py:24: start network... 17:17:14.419749 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:17:14.887030 run create_hlr_db(pid=570): Launched 17:17:15.057071 bus /gobi_6: Setting Powered False 17:17:16.117850 run create_hlr_db(pid=570): Terminated: ok {rc=0} 17:17:16.560700 run pcap-recorder_any(filters='host 10.42.42.2')(pid=572): Launched 17:17:16.990447 run osmo-hlr_10.42.42.2(pid=573): Launched 17:17:17.145060 run osmo-stp_10.42.42.5: Starting osmo-stp 17:17:17.657721 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=575): Launched 17:17:17.952507 run osmo-stp_10.42.42.5(pid=576): Launched 17:17:18.060338 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:17:18.574458 run pcap-recorder_any(filters='host 10.42.42.6')(pid=578): Launched 17:17:18.678724 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:17:18.936462 run patchelf(pid=579): Launched 17:17:19.108343 run osmo-stp_10.42.42.5(pid=576): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=576)] 17:17:19.234056 run osmo-stp_10.42.42.5(pid=576): stdout: | (launched: 2022-12-12_17:17:17.806439) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:17:19.360190 run osmo-stp_10.42.42.5(pid=576): stderr: | �[0;m�[38;5;43m20221212171717973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212171717973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212171717973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212171717974 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212171717974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212171717974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212171717974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:17:19.482373 run osmo-stp_10.42.42.5(pid=576): stdout: | (launched: 2022-12-12_17:17:17.806439) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:17:19.603055 run osmo-stp_10.42.42.5(pid=576): stderr: | �[0;m�[38;5;43m20221212171717973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212171717973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212171717973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212171717974 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212171717974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212171717974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212171717974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:17:19.743491 run patchelf(pid=579): Terminating (SIGINT) 17:17:19.908681 run patchelf(pid=579): Terminated: ok {rc=0} 17:17:19.938891 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=576): Process ended prematurely: osmo-stp_10.42.42.5(pid=576) [trial-2379↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=576)] [trial-2379↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 17:17:19.947601 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 17:17:20.007078 run osmo-hlr_10.42.42.2(pid=573): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=573)] 17:17:20.056207 run osmo-hlr_10.42.42.2(pid=573): stdout: | (launched: 2022-12-12_17:17:16.727200) 17:17:20.105468 run osmo-hlr_10.42.42.2(pid=573): stderr: | �[0;m�[1;31m20221212171716963 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212171716963 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212171716963 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212171716963 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212171716963 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212171716964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212171717014 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212171717031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212171717031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212171717031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:17:20.146964 run pcap-recorder_any(filters='host 10.42.42.2')(pid=572): Terminating (SIGTERM) 17:17:20.186618 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=575): Terminating (SIGTERM) 17:17:20.226114 run pcap-recorder_any(filters='host 10.42.42.6')(pid=578): Terminating (SIGTERM) 17:17:20.235569 --- ParallelTerminationStrategy: PID 572 died... 17:17:20.288508 run pcap-recorder_any(filters='host 10.42.42.2')(pid=572): Terminated: ok {rc=0} 17:17:20.298756 --- ParallelTerminationStrategy: PID 575 died... 17:17:20.351150 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=575): Terminated: ok {rc=0} 17:17:20.360849 --- ParallelTerminationStrategy: PID 578 died... 17:17:20.413038 run pcap-recorder_any(filters='host 10.42.42.6')(pid=578): Terminated: ok {rc=0} 17:17:20.500237 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=576): Process ended prematurely: osmo-stp_10.42.42.5(pid=576) [trial-2379↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=576)]