Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=27511): Process ended prematurely: osmo-stp_10.42.42.5(pid=27511) [trial-2379↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27511)]
Standard Output
---------------------------------------------- trial-2379 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:21:04.468847 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:21:04.479514 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:21:04.605510 tst cs_paging_gprs_active.py: using LAC 30043 16:21:04.730134 tst cs_paging_gprs_active.py: using RAC 208 16:21:04.848667 tst cs_paging_gprs_active.py: using CellId 30043 16:21:04.968465 tst cs_paging_gprs_active.py: using BVCI 30044 16:21:04.991807 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:21:05.002541 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:21:05.013052 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:21:05.023696 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:21:05.034167 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:21:05.044507 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:21:05.055202 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:21:05.065737 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:21:05.076338 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:21:05.197801 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:21:05.494864 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:21:05.632585 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:21:05.974980 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27501): Launched 16:21:06.259067 run iperf3-srv_10.42.42.10(pid=27502): Launched 16:21:06.460560 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:21:06.598210 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:21:06.938523 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27503): Launched 16:21:07.222613 run iperf3-srv_10.42.42.10(pid=27504): Launched 16:21:07.423293 tst cs_paging_gprs_active.py:38: start network... 16:21:07.560010 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:21:08.082020 run create_hlr_db(pid=27505): Launched 16:21:08.272518 bus /gobi_6: Setting Powered False 16:21:09.293583 run create_hlr_db(pid=27505): Terminated: ok {rc=0} 16:21:09.732879 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27507): Launched 16:21:10.063888 run osmo-hlr_10.42.42.2(pid=27508): Launched 16:21:10.190268 run osmo-stp_10.42.42.5: Starting osmo-stp 16:21:10.764789 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27510): Launched 16:21:11.095089 run osmo-stp_10.42.42.5(pid=27511): Launched 16:21:11.214584 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:21:11.791151 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27513): Launched 16:21:11.908425 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:21:12.196174 run patchelf(pid=27514): Launched 16:21:12.388563 run osmo-stp_10.42.42.5(pid=27511): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27511)] 16:21:12.528703 run osmo-stp_10.42.42.5(pid=27511): stdout: | (launched: 2022-12-12_16:21:10.932209) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:21:12.669719 run osmo-stp_10.42.42.5(pid=27511): stderr: | �[0;m�[38;5;43m20221212162111123 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212162111123 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212162111123 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212162111124 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212162111124 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212162111124 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212162111124 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:21:12.805681 run osmo-stp_10.42.42.5(pid=27511): stdout: | (launched: 2022-12-12_16:21:10.932209) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:21:12.941014 run osmo-stp_10.42.42.5(pid=27511): stderr: | �[0;m�[38;5;43m20221212162111123 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212162111123 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212162111123 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212162111124 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212162111124 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212162111124 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212162111124 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:21:13.097891 run patchelf(pid=27514): Terminating (SIGINT) 16:21:13.281966 run patchelf(pid=27514): Terminated: ok {rc=0} 16:21:13.315688 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27511): Process ended prematurely: osmo-stp_10.42.42.5(pid=27511) [trial-2379↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27511)] [trial-2379↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:21:13.325823 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 16:21:13.390005 run osmo-hlr_10.42.42.2(pid=27508): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27508)] 16:21:13.442129 run osmo-hlr_10.42.42.2(pid=27508): stdout: | (launched: 2022-12-12_16:21:09.900370) 16:21:13.495364 run osmo-hlr_10.42.42.2(pid=27508): stderr: | �[0;m�[1;31m20221212162110097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212162110097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212162110097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212162110097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212162110097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212162110098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212162110110 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212162110119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212162110119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212162110119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:21:13.540517 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27501): Terminating (SIGTERM) 16:21:13.584075 run iperf3-srv_10.42.42.10(pid=27502): Terminating (SIGTERM) 16:21:13.626307 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27503): Terminating (SIGTERM) 16:21:13.668438 run iperf3-srv_10.42.42.10(pid=27504): Terminating (SIGTERM) 16:21:13.710644 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27507): Terminating (SIGTERM) 16:21:13.753225 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27510): Terminating (SIGTERM) 16:21:13.795089 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27513): Terminating (SIGTERM) 16:21:13.805152 --- ParallelTerminationStrategy: PID 27501 died... 16:21:13.861350 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27501): Terminated: ok {rc=0} 16:21:13.871381 --- ParallelTerminationStrategy: PID 27502 died... 16:21:13.926769 run iperf3-srv_10.42.42.10(pid=27502): Terminated {rc=256} 16:21:13.937027 --- ParallelTerminationStrategy: PID 27503 died... 16:21:13.992572 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27503): Terminated: ok {rc=0} 16:21:14.002608 --- ParallelTerminationStrategy: PID 27504 died... 16:21:14.057974 run iperf3-srv_10.42.42.10(pid=27504): Terminated {rc=256} 16:21:14.068227 --- ParallelTerminationStrategy: PID 27507 died... 16:21:14.123773 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27507): Terminated: ok {rc=0} 16:21:14.133974 --- ParallelTerminationStrategy: PID 27510 died... 16:21:14.189832 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27510): Terminated: ok {rc=0} 16:21:14.199945 --- ParallelTerminationStrategy: PID 27513 died... 16:21:14.255920 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27513): Terminated: ok {rc=0} 16:21:14.342653 bus /gobi_0: Setting Powered False 16:21:15.444671 bus /gobi_0: Setting Powered False 16:21:16.573680 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27511): Process ended prematurely: osmo-stp_10.42.42.5(pid=27511) [trial-2379↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27511)]