Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=29854): Process ended prematurely: osmo-stp_10.42.42.5(pid=29854) [trial-2379↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29854)]
Standard Output
---------------------------------------------- trial-2379 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:47:08.740278 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:08.751750 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:47:08.905660 tst cs_paging_gprs_active.py: using LAC 30180 16:47:09.037615 tst cs_paging_gprs_active.py: using RAC 90 16:47:09.169031 tst cs_paging_gprs_active.py: using CellId 30180 16:47:09.293472 tst cs_paging_gprs_active.py: using BVCI 30181 16:47:09.317536 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:09.328484 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:09.339186 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:09.350313 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:09.360872 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:09.371548 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:09.382410 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:09.393092 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:47:09.403976 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:47:09.524851 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:47:09.827782 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:47:09.968683 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:47:10.317137 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29844): Launched 16:47:10.610410 run iperf3-srv_10.42.42.10(pid=29845): Launched 16:47:10.816743 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:47:10.957805 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:47:11.308477 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29846): Launched 16:47:11.599132 run iperf3-srv_10.42.42.10(pid=29847): Launched 16:47:11.805400 tst cs_paging_gprs_active.py:38: start network... 16:47:11.946435 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:47:12.477435 run create_hlr_db(pid=29848): Launched 16:47:12.671599 bus /gobi_6: Setting Powered False 16:47:13.692691 run create_hlr_db(pid=29848): Terminated: ok {rc=0} 16:47:14.139422 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29850): Launched 16:47:14.477880 run osmo-hlr_10.42.42.2(pid=29851): Launched 16:47:14.600371 run osmo-stp_10.42.42.5: Starting osmo-stp 16:47:15.189115 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29853): Launched 16:47:15.526569 run osmo-stp_10.42.42.5(pid=29854): Launched 16:47:15.647607 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:47:16.258184 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29856): Launched 16:47:16.380691 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:47:16.689186 run patchelf(pid=29857): Launched 16:47:16.889345 run osmo-stp_10.42.42.5(pid=29854): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29854)] 16:47:17.036574 run osmo-stp_10.42.42.5(pid=29854): stdout: | (launched: 2022-12-12_16:47:15.360418) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:47:17.183168 run osmo-stp_10.42.42.5(pid=29854): stderr: | �[0;m�[38;5;43m20221212164715551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212164715552 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212164715552 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212164715552 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212164715553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212164715553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212164715553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:47:17.321969 run osmo-stp_10.42.42.5(pid=29854): stdout: | (launched: 2022-12-12_16:47:15.360418) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:47:17.459191 run osmo-stp_10.42.42.5(pid=29854): stderr: | �[0;m�[38;5;43m20221212164715551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212164715552 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212164715552 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212164715552 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212164715553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212164715553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212164715553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:47:17.618720 run patchelf(pid=29857): Terminating (SIGINT) 16:47:17.806403 run patchelf(pid=29857): Terminated: ok {rc=0} 16:47:17.843851 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29854): Process ended prematurely: osmo-stp_10.42.42.5(pid=29854) [trial-2379↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29854)] [trial-2379↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:47:17.854142 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 16:47:17.918720 run osmo-hlr_10.42.42.2(pid=29851): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29851)] 16:47:17.971095 run osmo-hlr_10.42.42.2(pid=29851): stdout: | (launched: 2022-12-12_16:47:14.310382) 16:47:18.023694 run osmo-hlr_10.42.42.2(pid=29851): stderr: | �[0;m�[1;31m20221212164714509 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212164714509 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212164714509 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212164714509 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212164714509 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212164714509 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212164714521 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212164714530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212164714531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212164714531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:47:18.068113 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29844): Terminating (SIGTERM) 16:47:18.110295 run iperf3-srv_10.42.42.10(pid=29845): Terminating (SIGTERM) 16:47:18.152469 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29846): Terminating (SIGTERM) 16:47:18.194650 run iperf3-srv_10.42.42.10(pid=29847): Terminating (SIGTERM) 16:47:18.237091 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29850): Terminating (SIGTERM) 16:47:18.279305 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29853): Terminating (SIGTERM) 16:47:18.321880 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29856): Terminating (SIGTERM) 16:47:18.331777 --- ParallelTerminationStrategy: PID 29844 died... 16:47:18.388357 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29844): Terminated: ok {rc=0} 16:47:18.398546 --- ParallelTerminationStrategy: PID 29845 died... 16:47:18.454481 run iperf3-srv_10.42.42.10(pid=29845): Terminated {rc=256} 16:47:18.464825 --- ParallelTerminationStrategy: PID 29846 died... 16:47:18.520864 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29846): Terminated: ok {rc=0} 16:47:18.531034 --- ParallelTerminationStrategy: PID 29847 died... 16:47:18.586818 run iperf3-srv_10.42.42.10(pid=29847): Terminated {rc=256} 16:47:18.597290 --- ParallelTerminationStrategy: PID 29850 died... 16:47:18.653607 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29850): Terminated: ok {rc=0} 16:47:18.663972 --- ParallelTerminationStrategy: PID 29853 died... 16:47:18.719885 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29853): Terminated: ok {rc=0} 16:47:18.730071 --- ParallelTerminationStrategy: PID 29856 died... 16:47:18.786240 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29856): Terminated: ok {rc=0} 16:47:18.874175 bus /gobi_0: Setting Powered False 16:47:19.976788 bus /gobi_0: Setting Powered False 16:47:21.088202 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29854): Process ended prematurely: osmo-stp_10.42.42.5(pid=29854) [trial-2379↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29854)]