Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11783): Process ended prematurely: osmo-stp_10.42.42.5(pid=11783) [trial-2380↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11783)]
Standard Output
---------------------------------------------- trial-2380 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 18:22:06.272516 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:06.283924 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 18:22:06.431073 tst cs_paging_gprs_active.py: using LAC 30641 18:22:06.559097 tst cs_paging_gprs_active.py: using RAC 41 18:22:06.687173 tst cs_paging_gprs_active.py: using CellId 30641 18:22:06.810637 tst cs_paging_gprs_active.py: using BVCI 30642 18:22:06.834327 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:06.845411 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:06.856074 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:06.867264 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:06.879670 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:06.892734 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:06.904106 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:06.915163 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:06.926449 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:22:07.046842 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:22:07.331337 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:22:07.458787 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:22:07.778163 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11773): Launched 18:22:08.042282 run iperf3-srv_10.42.42.10(pid=11774): Launched 18:22:08.228788 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:22:08.355645 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:22:08.672836 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11775): Launched 18:22:08.938253 run iperf3-srv_10.42.42.10(pid=11776): Launched 18:22:09.125009 tst cs_paging_gprs_active.py:38: start network... 18:22:09.252293 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:22:09.733740 run create_hlr_db(pid=11777): Launched 18:22:09.909973 bus /gobi_6: Setting Powered False 18:22:10.931656 run create_hlr_db(pid=11777): Terminated: ok {rc=0} 18:22:11.340694 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11779): Launched 18:22:11.650910 run osmo-hlr_10.42.42.2(pid=11780): Launched 18:22:11.771022 run osmo-stp_10.42.42.5: Starting osmo-stp 18:22:12.308602 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11782): Launched 18:22:12.617963 run osmo-stp_10.42.42.5(pid=11783): Launched 18:22:12.729234 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:22:13.264060 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11785): Launched 18:22:13.372941 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:22:13.642487 run patchelf(pid=11786): Launched 18:22:13.821430 run osmo-stp_10.42.42.5(pid=11783): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11783)] 18:22:13.951803 run osmo-stp_10.42.42.5(pid=11783): stdout: | (launched: 2022-12-12_18:22:12.463648) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:22:14.082294 run osmo-stp_10.42.42.5(pid=11783): stderr: | �[0;m�[38;5;43m20221212182212632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212182212632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212182212632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212182212633 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212182212633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212182212633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212182212633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:22:14.207727 run osmo-stp_10.42.42.5(pid=11783): stdout: | (launched: 2022-12-12_18:22:12.463648) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:22:14.332101 run osmo-stp_10.42.42.5(pid=11783): stderr: | �[0;m�[38;5;43m20221212182212632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212182212632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212182212632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212182212633 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212182212633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212182212633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212182212633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:22:14.477916 run patchelf(pid=11786): Terminating (SIGINT) 18:22:14.648791 run patchelf(pid=11786): Terminated: ok {rc=0} 18:22:14.680442 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11783): Process ended prematurely: osmo-stp_10.42.42.5(pid=11783) [trial-2380↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11783)] [trial-2380↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 18:22:14.689686 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 18:22:14.750735 run osmo-hlr_10.42.42.2(pid=11780): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11780)] 18:22:14.799826 run osmo-hlr_10.42.42.2(pid=11780): stdout: | (launched: 2022-12-12_18:22:11.496264) 18:22:14.849586 run osmo-hlr_10.42.42.2(pid=11780): stderr: | �[0;m�[1;31m20221212182211670 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212182211670 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212182211670 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212182211671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212182211671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212182211671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212182211683 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212182211691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212182211691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212182211691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:22:14.891683 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11773): Terminating (SIGTERM) 18:22:14.931532 run iperf3-srv_10.42.42.10(pid=11774): Terminating (SIGTERM) 18:22:14.971461 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11775): Terminating (SIGTERM) 18:22:15.011269 run iperf3-srv_10.42.42.10(pid=11776): Terminating (SIGTERM) 18:22:15.051317 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11779): Terminating (SIGTERM) 18:22:15.091636 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11782): Terminating (SIGTERM) 18:22:15.131625 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11785): Terminating (SIGTERM) 18:22:15.141211 --- ParallelTerminationStrategy: PID 11773 died... 18:22:15.194776 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11773): Terminated: ok {rc=0} 18:22:15.204647 --- ParallelTerminationStrategy: PID 11774 died... 18:22:15.258090 run iperf3-srv_10.42.42.10(pid=11774): Terminated {rc=256} 18:22:15.267923 --- ParallelTerminationStrategy: PID 11775 died... 18:22:15.321546 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11775): Terminated: ok {rc=0} 18:22:15.331098 --- ParallelTerminationStrategy: PID 11776 died... 18:22:15.383994 run iperf3-srv_10.42.42.10(pid=11776): Terminated {rc=256} 18:22:15.393864 --- ParallelTerminationStrategy: PID 11779 died... 18:22:15.447075 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11779): Terminated: ok {rc=0} 18:22:15.456615 --- ParallelTerminationStrategy: PID 11782 died... 18:22:15.509493 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11782): Terminated: ok {rc=0} 18:22:15.519280 --- ParallelTerminationStrategy: PID 11785 died... 18:22:15.572877 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11785): Terminated: ok {rc=0} 18:22:15.660797 bus /gobi_0: Setting Powered False 18:22:16.783225 bus /gobi_0: Setting Powered False 18:22:17.890036 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11783): Process ended prematurely: osmo-stp_10.42.42.5(pid=11783) [trial-2380↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11783)]