Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=19319): Process ended prematurely: osmo-stp_10.42.42.5(pid=19319) [trial-2381↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19319)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 19:31:27.688180 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:31:27.698754 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 19:31:27.832908 tst cs_paging_gprs_active.py: using LAC 31006 19:31:27.951998 tst cs_paging_gprs_active.py: using RAC 151 19:31:28.074458 tst cs_paging_gprs_active.py: using CellId 31006 19:31:28.192218 tst cs_paging_gprs_active.py: using BVCI 31007 19:31:28.215100 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:31:28.225642 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:31:28.235952 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:31:28.246425 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:31:28.256777 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:31:28.267162 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:31:28.277687 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:31:28.288169 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:31:28.298722 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 19:31:28.417093 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 19:31:28.709166 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:31:28.844076 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:31:29.176246 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19309): Launched 19:31:29.452389 run iperf3-srv_10.42.42.10(pid=19310): Launched 19:31:29.649502 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:31:29.784037 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:31:30.117336 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19311): Launched 19:31:30.393415 run iperf3-srv_10.42.42.10(pid=19312): Launched 19:31:30.589977 tst cs_paging_gprs_active.py:38: start network... 19:31:30.723673 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:31:31.286640 run create_hlr_db(pid=19313): Launched 19:31:31.477309 bus /sierra_2: Setting Powered False 19:31:32.494979 run create_hlr_db(pid=19313): Terminated: ok {rc=0} 19:31:32.897006 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19315): Launched 19:31:33.195200 run osmo-hlr_10.42.42.2(pid=19316): Launched 19:31:33.304497 run osmo-stp_10.42.42.5: Starting osmo-stp 19:31:33.821687 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19318): Launched 19:31:34.119933 run osmo-stp_10.42.42.5(pid=19319): Launched 19:31:34.227865 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:31:34.750136 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19321): Launched 19:31:34.857309 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:31:35.119557 run patchelf(pid=19322): Launched 19:31:35.296282 run osmo-stp_10.42.42.5(pid=19319): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19319)] 19:31:35.425419 run osmo-stp_10.42.42.5(pid=19319): stdout: | (launched: 2022-12-12_19:31:33.972628) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:31:35.554905 run osmo-stp_10.42.42.5(pid=19319): stderr: | �[0;m�[38;5;43m20221212193134141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212193134141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212193134141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212193134142 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212193134142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212193134142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212193134142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:31:35.679229 run osmo-stp_10.42.42.5(pid=19319): stdout: | (launched: 2022-12-12_19:31:33.972628) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:31:35.802642 run osmo-stp_10.42.42.5(pid=19319): stderr: | �[0;m�[38;5;43m20221212193134141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212193134141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212193134141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212193134142 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212193134142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212193134142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212193134142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:31:35.946225 run patchelf(pid=19322): Terminating (SIGINT) 19:31:36.115097 run patchelf(pid=19322): Terminated: ok {rc=0} 19:31:36.146208 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19319): Process ended prematurely: osmo-stp_10.42.42.5(pid=19319) [trial-2381↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19319)] [trial-2381↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 19:31:36.155310 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 19:31:36.215126 run osmo-hlr_10.42.42.2(pid=19316): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19316)] 19:31:36.263662 run osmo-hlr_10.42.42.2(pid=19316): stdout: | (launched: 2022-12-12_19:31:33.048337) 19:31:36.312920 run osmo-hlr_10.42.42.2(pid=19316): stderr: | �[0;m�[1;31m20221212193133221 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212193133221 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212193133222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212193133222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212193133222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212193133222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212193133234 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212193133243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212193133243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212193133243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:31:36.355054 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19309): Terminating (SIGTERM) 19:31:36.394756 run iperf3-srv_10.42.42.10(pid=19310): Terminating (SIGTERM) 19:31:36.434533 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19311): Terminating (SIGTERM) 19:31:36.474459 run iperf3-srv_10.42.42.10(pid=19312): Terminating (SIGTERM) 19:31:36.514264 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19315): Terminating (SIGTERM) 19:31:36.553961 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19318): Terminating (SIGTERM) 19:31:36.594152 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19321): Terminating (SIGTERM) 19:31:36.603422 --- ParallelTerminationStrategy: PID 19309 died... 19:31:36.657582 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19309): Terminated: ok {rc=0} 19:31:36.667442 --- ParallelTerminationStrategy: PID 19310 died... 19:31:36.720817 run iperf3-srv_10.42.42.10(pid=19310): Terminated {rc=256} 19:31:36.730378 --- ParallelTerminationStrategy: PID 19311 died... 19:31:36.783030 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19311): Terminated: ok {rc=0} 19:31:36.792596 --- ParallelTerminationStrategy: PID 19312 died... 19:31:36.845687 run iperf3-srv_10.42.42.10(pid=19312): Terminated {rc=256} 19:31:36.855186 --- ParallelTerminationStrategy: PID 19315 died... 19:31:36.908165 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19315): Terminated: ok {rc=0} 19:31:36.917704 --- ParallelTerminationStrategy: PID 19318 died... 19:31:36.970529 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19318): Terminated: ok {rc=0} 19:31:36.980208 --- ParallelTerminationStrategy: PID 19321 died... 19:31:37.033467 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19321): Terminated: ok {rc=0} 19:31:37.122043 bus /gobi_0: Setting Powered False 19:31:38.226096 bus /gobi_0: Setting Powered False 19:31:39.337990 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19319): Process ended prematurely: osmo-stp_10.42.42.5(pid=19319) [trial-2381↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19319)]