Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=21006): Process ended prematurely: osmo-stp_10.42.42.5(pid=21006) [trial-2381↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21006)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 19:51:38.124394 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:38.135955 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:51:38.301690 tst cs_paging_gprs_active.py: using LAC 31112 19:51:38.428800 tst cs_paging_gprs_active.py: using RAC 2 19:51:38.554138 tst cs_paging_gprs_active.py: using CellId 31112 19:51:38.678761 tst cs_paging_gprs_active.py: using BVCI 31113 19:51:38.703267 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:38.714698 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:38.726037 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:38.738029 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:38.749887 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:38.761526 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:38.774885 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:38.787369 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:51:38.798863 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:51:38.916277 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:51:39.197958 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:51:39.323343 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:51:39.636830 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20996): Launched 19:51:39.899595 run iperf3-srv_10.42.42.10(pid=20997): Launched 19:51:40.082885 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:51:40.207534 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:51:40.520680 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20998): Launched 19:51:40.782129 run iperf3-srv_10.42.42.10(pid=20999): Launched 19:51:40.965017 tst cs_paging_gprs_active.py:38: start network... 19:51:41.089473 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:51:41.572600 run create_hlr_db(pid=21000): Launched 19:51:41.745730 bus /gobi_6: Setting Powered False 19:51:42.767568 run create_hlr_db(pid=21000): Terminated: ok {rc=0} 19:51:43.199136 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21002): Launched 19:51:43.523453 run osmo-hlr_10.42.42.2(pid=21003): Launched 19:51:43.639937 run osmo-stp_10.42.42.5: Starting osmo-stp 19:51:44.199692 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21005): Launched 19:51:44.524093 run osmo-stp_10.42.42.5(pid=21006): Launched 19:51:44.641308 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:51:45.203367 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21008): Launched 19:51:45.318216 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:51:45.603037 run patchelf(pid=21009): Launched 19:51:45.791696 run osmo-stp_10.42.42.5(pid=21006): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21006)] 19:51:45.949217 run osmo-stp_10.42.42.5(pid=21006): stdout: | (launched: 2022-12-12_19:51:44.363592) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:51:46.089616 run osmo-stp_10.42.42.5(pid=21006): stderr: | �[0;m�[38;5;43m20221212195144551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212195144551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212195144552 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212195144552 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212195144553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212195144553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212195144553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:51:46.224936 run osmo-stp_10.42.42.5(pid=21006): stdout: | (launched: 2022-12-12_19:51:44.363592) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:51:46.359523 run osmo-stp_10.42.42.5(pid=21006): stderr: | �[0;m�[38;5;43m20221212195144551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212195144551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212195144552 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212195144552 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212195144553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212195144553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212195144553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:51:46.516695 run patchelf(pid=21009): Terminating (SIGINT) 19:51:46.700771 run patchelf(pid=21009): Terminated: ok {rc=0} 19:51:46.735399 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21006): Process ended prematurely: osmo-stp_10.42.42.5(pid=21006) [trial-2381↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21006)] [trial-2381↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 19:51:46.746075 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 19:51:46.812219 run osmo-hlr_10.42.42.2(pid=21003): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21003)] 19:51:46.865176 run osmo-hlr_10.42.42.2(pid=21003): stdout: | (launched: 2022-12-12_19:51:43.363443) 19:51:46.918725 run osmo-hlr_10.42.42.2(pid=21003): stderr: | �[0;m�[1;31m20221212195143557 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212195143557 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212195143557 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212195143557 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212195143558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212195143558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212195143571 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212195143579 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212195143579 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212195143579 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:51:46.963825 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20996): Terminating (SIGTERM) 19:51:47.008810 run iperf3-srv_10.42.42.10(pid=20997): Terminating (SIGTERM) 19:51:47.053320 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20998): Terminating (SIGTERM) 19:51:47.097200 run iperf3-srv_10.42.42.10(pid=20999): Terminating (SIGTERM) 19:51:47.142743 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21002): Terminating (SIGTERM) 19:51:47.185791 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21005): Terminating (SIGTERM) 19:51:47.229115 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21008): Terminating (SIGTERM) 19:51:47.238999 --- ParallelTerminationStrategy: PID 20996 died... 19:51:47.295335 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20996): Terminated: ok {rc=0} 19:51:47.305838 --- ParallelTerminationStrategy: PID 20997 died... 19:51:47.362566 run iperf3-srv_10.42.42.10(pid=20997): Terminated {rc=256} 19:51:47.372717 --- ParallelTerminationStrategy: PID 20998 died... 19:51:47.429353 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20998): Terminated: ok {rc=0} 19:51:47.439558 --- ParallelTerminationStrategy: PID 20999 died... 19:51:47.495833 run iperf3-srv_10.42.42.10(pid=20999): Terminated {rc=256} 19:51:47.506137 --- ParallelTerminationStrategy: PID 21002 died... 19:51:47.562552 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21002): Terminated: ok {rc=0} 19:51:47.572787 --- ParallelTerminationStrategy: PID 21005 died... 19:51:47.629450 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21005): Terminated: ok {rc=0} 19:51:47.639464 --- ParallelTerminationStrategy: PID 21008 died... 19:51:47.695874 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21008): Terminated: ok {rc=0} 19:51:47.783538 bus /gobi_0: Setting Powered False 19:51:48.890962 bus /gobi_0: Setting Powered False 19:51:49.998750 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21006): Process ended prematurely: osmo-stp_10.42.42.5(pid=21006) [trial-2381↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21006)]