Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26964): Process ended prematurely: osmo-stp_10.42.42.5(pid=26964) [trial-2382↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26964)]
Standard Output
---------------------------------------------- trial-2382 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 21:00:21.473244 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:00:21.484725 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 21:00:21.637688 tst cs_paging_gprs_active.py: using LAC 31472 21:00:21.774584 tst cs_paging_gprs_active.py: using RAC 107 21:00:21.907385 tst cs_paging_gprs_active.py: using CellId 31472 21:00:22.039222 tst cs_paging_gprs_active.py: using BVCI 31473 21:00:22.065227 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:00:22.076544 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:00:22.087717 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:00:22.099447 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:00:22.111106 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:00:22.122663 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:00:22.134513 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:00:22.146042 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:00:22.157906 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:00:22.279348 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:00:22.586431 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:00:22.729501 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:00:23.080338 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26954): Launched 21:00:23.374936 run iperf3-srv_10.42.42.10(pid=26955): Launched 21:00:23.585254 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:00:23.728549 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:00:24.080536 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26956): Launched 21:00:24.373064 run iperf3-srv_10.42.42.10(pid=26957): Launched 21:00:24.583043 tst cs_paging_gprs_active.py:38: start network... 21:00:24.726593 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:00:25.260432 run create_hlr_db(pid=26958): Launched 21:00:25.457594 bus /gobi_6: Setting Powered False 21:00:26.480278 run create_hlr_db(pid=26958): Terminated: ok {rc=0} 21:00:26.930204 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26960): Launched 21:00:27.270686 run osmo-hlr_10.42.42.2(pid=26961): Launched 21:00:27.393583 run osmo-stp_10.42.42.5: Starting osmo-stp 21:00:27.987554 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26963): Launched 21:00:28.329969 run osmo-stp_10.42.42.5(pid=26964): Launched 21:00:28.454910 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:00:29.046542 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26966): Launched 21:00:29.168700 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:00:29.464828 run patchelf(pid=26967): Launched 21:00:29.663160 run osmo-stp_10.42.42.5(pid=26964): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26964)] 21:00:29.808271 run osmo-stp_10.42.42.5(pid=26964): stdout: | (launched: 2022-12-12_21:00:28.161382) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:00:29.953600 run osmo-stp_10.42.42.5(pid=26964): stderr: | �[0;m�[38;5;43m20221212210028354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212210028354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212210028355 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212210028355 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212210028356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212210028356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212210028356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:00:30.094313 run osmo-stp_10.42.42.5(pid=26964): stdout: | (launched: 2022-12-12_21:00:28.161382) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:00:30.233955 run osmo-stp_10.42.42.5(pid=26964): stderr: | �[0;m�[38;5;43m20221212210028354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212210028354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212210028355 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212210028355 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212210028356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212210028356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212210028356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:00:30.397195 run patchelf(pid=26967): Terminating (SIGINT) 21:00:30.588544 run patchelf(pid=26967): Terminated: ok {rc=0} 21:00:30.623513 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26964): Process ended prematurely: osmo-stp_10.42.42.5(pid=26964) [trial-2382↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26964)] [trial-2382↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 21:00:30.633609 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 21:00:30.699017 run osmo-hlr_10.42.42.2(pid=26961): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26961)] 21:00:30.752174 run osmo-hlr_10.42.42.2(pid=26961): stdout: | (launched: 2022-12-12_21:00:27.103268) 21:00:30.806123 run osmo-hlr_10.42.42.2(pid=26961): stderr: | �[0;m�[1;31m20221212210027303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212210027303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212210027303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212210027303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212210027303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212210027303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212210027316 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212210027324 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212210027325 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212210027325 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:00:30.856460 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26954): Terminating (SIGTERM) 21:00:30.900708 run iperf3-srv_10.42.42.10(pid=26955): Terminating (SIGTERM) 21:00:30.945214 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26956): Terminating (SIGTERM) 21:00:30.988860 run iperf3-srv_10.42.42.10(pid=26957): Terminating (SIGTERM) 21:00:31.033041 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26960): Terminating (SIGTERM) 21:00:31.077659 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26963): Terminating (SIGTERM) 21:00:31.121851 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26966): Terminating (SIGTERM) 21:00:31.131952 --- ParallelTerminationStrategy: PID 26954 died... 21:00:31.190875 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26954): Terminated: ok {rc=0} 21:00:31.201816 --- ParallelTerminationStrategy: PID 26955 died... 21:00:31.260316 run iperf3-srv_10.42.42.10(pid=26955): Terminated {rc=256} 21:00:31.271144 --- ParallelTerminationStrategy: PID 26956 died... 21:00:31.329724 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26956): Terminated: ok {rc=0} 21:00:31.341069 --- ParallelTerminationStrategy: PID 26957 died... 21:00:31.399767 run iperf3-srv_10.42.42.10(pid=26957): Terminated {rc=256} 21:00:31.410759 --- ParallelTerminationStrategy: PID 26960 died... 21:00:31.469331 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26960): Terminated: ok {rc=0} 21:00:31.480569 --- ParallelTerminationStrategy: PID 26963 died... 21:00:31.539300 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26963): Terminated: ok {rc=0} 21:00:31.550274 --- ParallelTerminationStrategy: PID 26966 died... 21:00:31.608885 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26966): Terminated: ok {rc=0} 21:00:31.700570 bus /gobi_0: Setting Powered False 21:00:32.806108 bus /gobi_0: Setting Powered False 21:00:33.920217 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26964): Process ended prematurely: osmo-stp_10.42.42.5(pid=26964) [trial-2382↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26964)]