Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=27848): Process ended prematurely: osmo-stp_10.42.42.5(pid=27848) [trial-2382↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27848)]
Standard Output
---------------------------------------------- trial-2382 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 21:09:26.149645 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:26.160735 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 21:09:26.301973 tst cs_paging_gprs_active.py: using LAC 31519 21:09:26.426893 tst cs_paging_gprs_active.py: using RAC 154 21:09:26.553917 tst cs_paging_gprs_active.py: using CellId 31519 21:09:26.679450 tst cs_paging_gprs_active.py: using BVCI 31520 21:09:26.703899 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:26.715156 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:26.726138 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:26.737119 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:26.747853 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:26.758708 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:26.769679 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:26.780406 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:26.791348 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:09:26.913359 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:09:27.204240 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:09:27.335870 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:09:27.661962 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27838): Launched 21:09:27.933109 run iperf3-srv_10.42.42.10(pid=27839): Launched 21:09:28.127024 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:09:28.259609 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:09:28.587639 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27840): Launched 21:09:28.859585 run iperf3-srv_10.42.42.10(pid=27841): Launched 21:09:29.051757 tst cs_paging_gprs_active.py:38: start network... 21:09:29.183799 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:09:29.689601 run create_hlr_db(pid=27842): Launched 21:09:29.870386 bus /gobi_6: Setting Powered False 21:09:30.916849 run create_hlr_db(pid=27842): Terminated: ok {rc=0} 21:09:31.409116 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27844): Launched 21:09:31.809497 run osmo-hlr_10.42.42.2(pid=27845): Launched 21:09:31.953645 run osmo-stp_10.42.42.5: Starting osmo-stp 21:09:32.593855 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27847): Launched 21:09:32.935653 run osmo-stp_10.42.42.5(pid=27848): Launched 21:09:33.060005 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:09:33.652108 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27850): Launched 21:09:33.774938 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:09:34.070562 run patchelf(pid=27851): Launched 21:09:34.268152 run osmo-stp_10.42.42.5(pid=27848): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27848)] 21:09:34.414007 run osmo-stp_10.42.42.5(pid=27848): stdout: | (launched: 2022-12-12_21:09:32.767388) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:09:34.559704 run osmo-stp_10.42.42.5(pid=27848): stderr: | �[0;m�[38;5;43m20221212210932964 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212210932964 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212210932964 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212210932965 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212210932965 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212210932965 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212210932965 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:09:34.700106 run osmo-stp_10.42.42.5(pid=27848): stdout: | (launched: 2022-12-12_21:09:32.767388) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:09:34.839406 run osmo-stp_10.42.42.5(pid=27848): stderr: | �[0;m�[38;5;43m20221212210932964 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212210932964 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212210932964 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212210932965 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212210932965 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212210932965 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212210932965 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:09:35.001323 run patchelf(pid=27851): Terminating (SIGINT) 21:09:35.191435 run patchelf(pid=27851): Terminated: ok {rc=0} 21:09:35.226334 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27848): Process ended prematurely: osmo-stp_10.42.42.5(pid=27848) [trial-2382↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27848)] [trial-2382↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 21:09:35.236498 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 21:09:35.301822 run osmo-hlr_10.42.42.2(pid=27845): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27845)] 21:09:35.355498 run osmo-hlr_10.42.42.2(pid=27845): stdout: | (launched: 2022-12-12_21:09:31.587058) 21:09:35.409510 run osmo-hlr_10.42.42.2(pid=27845): stderr: | �[0;m�[1;31m20221212210931899 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212210931899 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212210931899 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212210931899 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212210931900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212210931900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212210931921 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212210931946 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212210931947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212210931947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:09:35.455728 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27838): Terminating (SIGTERM) 21:09:35.499561 run iperf3-srv_10.42.42.10(pid=27839): Terminating (SIGTERM) 21:09:35.543138 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27840): Terminating (SIGTERM) 21:09:35.586156 run iperf3-srv_10.42.42.10(pid=27841): Terminating (SIGTERM) 21:09:35.629336 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27844): Terminating (SIGTERM) 21:09:35.673352 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27847): Terminating (SIGTERM) 21:09:35.716502 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27850): Terminating (SIGTERM) 21:09:35.726707 --- ParallelTerminationStrategy: PID 27838 died... 21:09:35.784617 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27838): Terminated: ok {rc=0} 21:09:35.795021 --- ParallelTerminationStrategy: PID 27839 died... 21:09:35.852424 run iperf3-srv_10.42.42.10(pid=27839): Terminated {rc=256} 21:09:35.863029 --- ParallelTerminationStrategy: PID 27840 died... 21:09:35.920450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27840): Terminated: ok {rc=0} 21:09:35.931436 --- ParallelTerminationStrategy: PID 27841 died... 21:09:35.989316 run iperf3-srv_10.42.42.10(pid=27841): Terminated {rc=256} 21:09:35.999563 --- ParallelTerminationStrategy: PID 27844 died... 21:09:36.057449 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27844): Terminated: ok {rc=0} 21:09:36.067708 --- ParallelTerminationStrategy: PID 27847 died... 21:09:36.125507 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27847): Terminated: ok {rc=0} 21:09:36.135795 --- ParallelTerminationStrategy: PID 27850 died... 21:09:36.193480 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27850): Terminated: ok {rc=0} 21:09:36.284516 bus /gobi_0: Setting Powered False 21:09:37.392335 bus /gobi_0: Setting Powered False 21:09:38.507131 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27848): Process ended prematurely: osmo-stp_10.42.42.5(pid=27848) [trial-2382↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27848)]