Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=29100): Process ended prematurely: osmo-stp_10.42.42.5(pid=29100) [trial-2382↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29100)]
Standard Output
---------------------------------------------- trial-2382 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 21:19:54.575943 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:19:54.587389 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 21:19:54.753775 tst cs_paging_gprs_active.py: using LAC 31573 21:19:54.882766 tst cs_paging_gprs_active.py: using RAC 208 21:19:55.005324 tst cs_paging_gprs_active.py: using CellId 31573 21:19:55.127725 tst cs_paging_gprs_active.py: using BVCI 31574 21:19:55.151400 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:19:55.162378 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:19:55.173088 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:19:55.184728 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:19:55.195982 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:19:55.207235 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:19:55.218635 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:19:55.229875 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:19:55.241235 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 21:19:55.363918 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 21:19:55.651300 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:19:55.781739 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:19:56.098443 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29090): Launched 21:19:56.362271 run iperf3-srv_10.42.42.10(pid=29091): Launched 21:19:56.550313 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:19:56.678992 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:19:56.997720 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29092): Launched 21:19:57.262377 run iperf3-srv_10.42.42.10(pid=29093): Launched 21:19:57.450852 tst cs_paging_gprs_active.py:38: start network... 21:19:57.579951 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:19:58.074335 run create_hlr_db(pid=29094): Launched 21:19:58.251216 bus /gobi_6: Setting Powered False 21:19:59.274370 run create_hlr_db(pid=29094): Terminated: ok {rc=0} 21:19:59.708826 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29096): Launched 21:20:00.037955 run osmo-hlr_10.42.42.2(pid=29097): Launched 21:20:00.160127 run osmo-stp_10.42.42.5: Starting osmo-stp 21:20:00.727896 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29099): Launched 21:20:01.158178 run osmo-stp_10.42.42.5(pid=29100): Launched 21:20:01.393661 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:20:01.981896 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29105): Launched 21:20:02.102377 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:20:02.404496 run patchelf(pid=29106): Launched 21:20:02.595759 run osmo-stp_10.42.42.5(pid=29100): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29100)] 21:20:02.735478 run osmo-stp_10.42.42.5(pid=29100): stdout: | (launched: 2022-12-12_21:20:00.914754) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:20:02.875450 run osmo-stp_10.42.42.5(pid=29100): stderr: | �[0;m�[38;5;43m20221212212001248 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212212001252 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212212001252 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212212001253 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212212001253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212212001253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212212001253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:20:03.011764 run osmo-stp_10.42.42.5(pid=29100): stdout: | (launched: 2022-12-12_21:20:00.914754) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:20:03.146869 run osmo-stp_10.42.42.5(pid=29100): stderr: | �[0;m�[38;5;43m20221212212001248 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212212001252 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212212001252 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212212001253 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212212001253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212212001253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212212001253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:20:03.303682 run patchelf(pid=29106): Terminating (SIGINT) 21:20:03.487774 run patchelf(pid=29106): Terminated: ok {rc=0} 21:20:03.521708 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29100): Process ended prematurely: osmo-stp_10.42.42.5(pid=29100) [trial-2382↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29100)] [trial-2382↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 21:20:03.531688 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 21:20:03.597131 run osmo-hlr_10.42.42.2(pid=29097): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29097)] 21:20:03.650170 run osmo-hlr_10.42.42.2(pid=29097): stdout: | (launched: 2022-12-12_21:19:59.876172) 21:20:03.703838 run osmo-hlr_10.42.42.2(pid=29097): stderr: | �[0;m�[1;31m20221212212000072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212212000072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212212000072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212212000073 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212212000073 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212212000073 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212212000085 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212212000095 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212212000095 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212212000095 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:20:03.749114 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29090): Terminating (SIGTERM) 21:20:03.792053 run iperf3-srv_10.42.42.10(pid=29091): Terminating (SIGTERM) 21:20:03.835486 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29092): Terminating (SIGTERM) 21:20:03.878174 run iperf3-srv_10.42.42.10(pid=29093): Terminating (SIGTERM) 21:20:03.921411 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29096): Terminating (SIGTERM) 21:20:03.964296 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29099): Terminating (SIGTERM) 21:20:04.007506 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29105): Terminating (SIGTERM) 21:20:04.017307 --- ParallelTerminationStrategy: PID 29090 died... 21:20:04.075290 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29090): Terminated: ok {rc=0} 21:20:04.085505 --- ParallelTerminationStrategy: PID 29091 died... 21:20:04.142545 run iperf3-srv_10.42.42.10(pid=29091): Terminated {rc=256} 21:20:04.153188 --- ParallelTerminationStrategy: PID 29092 died... 21:20:04.210747 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29092): Terminated: ok {rc=0} 21:20:04.221115 --- ParallelTerminationStrategy: PID 29093 died... 21:20:04.278468 run iperf3-srv_10.42.42.10(pid=29093): Terminated {rc=256} 21:20:04.288708 --- ParallelTerminationStrategy: PID 29096 died... 21:20:04.346281 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29096): Terminated: ok {rc=0} 21:20:04.356675 --- ParallelTerminationStrategy: PID 29099 died... 21:20:04.414257 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29099): Terminated: ok {rc=0} 21:20:04.424564 --- ParallelTerminationStrategy: PID 29105 died... 21:20:04.482027 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29105): Terminated: ok {rc=0} 21:20:04.571499 bus /gobi_0: Setting Powered False 21:20:05.676835 bus /gobi_0: Setting Powered False 21:20:06.789079 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29100): Process ended prematurely: osmo-stp_10.42.42.5(pid=29100) [trial-2382↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29100)]