Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=25559): Process ended prematurely: osmo-stp_10.42.42.5(pid=25559) [trial-2382↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25559)]
Standard Output
---------------------------------------------- trial-2382 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 20:44:33.085643 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:44:33.096480 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 20:44:33.242620 tst cs_paging_gprs_active.py: using LAC 31389 20:44:33.373816 tst cs_paging_gprs_active.py: using RAC 24 20:44:33.506799 tst cs_paging_gprs_active.py: using CellId 31389 20:44:33.639306 tst cs_paging_gprs_active.py: using BVCI 31390 20:44:33.665822 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:44:33.677458 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:44:33.688834 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:44:33.700127 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:44:33.711459 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:44:33.722898 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:44:33.734289 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:44:33.745428 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:44:33.756776 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:44:33.877233 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:44:34.185741 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:44:34.330273 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:44:34.673061 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25549): Launched 20:44:34.949722 run iperf3-srv_10.42.42.10(pid=25550): Launched 20:44:35.145431 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:44:35.279160 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:44:35.611275 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25551): Launched 20:44:35.887008 run iperf3-srv_10.42.42.10(pid=25552): Launched 20:44:36.082148 tst cs_paging_gprs_active.py:38: start network... 20:44:36.215679 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:44:36.719030 run create_hlr_db(pid=25553): Launched 20:44:36.903646 bus /gobi_6: Setting Powered False 20:44:37.924782 run create_hlr_db(pid=25553): Terminated: ok {rc=0} 20:44:38.380927 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25555): Launched 20:44:38.726510 run osmo-hlr_10.42.42.2(pid=25556): Launched 20:44:38.853247 run osmo-stp_10.42.42.5: Starting osmo-stp 20:44:39.450098 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25558): Launched 20:44:39.794576 run osmo-stp_10.42.42.5(pid=25559): Launched 20:44:39.919363 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:44:40.517916 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25561): Launched 20:44:40.640489 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:44:40.940488 run patchelf(pid=25562): Launched 20:44:41.139933 run osmo-stp_10.42.42.5(pid=25559): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25559)] 20:44:41.285513 run osmo-stp_10.42.42.5(pid=25559): stdout: | (launched: 2022-12-12_20:44:39.624393) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:44:41.430952 run osmo-stp_10.42.42.5(pid=25559): stderr: | �[0;m�[38;5;43m20221212204439819 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212204439819 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212204439820 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212204439820 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212204439820 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212204439821 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212204439821 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:44:41.571775 run osmo-stp_10.42.42.5(pid=25559): stdout: | (launched: 2022-12-12_20:44:39.624393) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:44:41.711524 run osmo-stp_10.42.42.5(pid=25559): stderr: | �[0;m�[38;5;43m20221212204439819 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212204439819 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212204439820 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212204439820 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212204439820 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212204439821 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212204439821 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:44:41.875200 run patchelf(pid=25562): Terminating (SIGINT) 20:44:42.067160 run patchelf(pid=25562): Terminated: ok {rc=0} 20:44:42.102256 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25559): Process ended prematurely: osmo-stp_10.42.42.5(pid=25559) [trial-2382↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25559)] [trial-2382↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 20:44:42.112410 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 20:44:42.176896 run osmo-hlr_10.42.42.2(pid=25556): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25556)] 20:44:42.229504 run osmo-hlr_10.42.42.2(pid=25556): stdout: | (launched: 2022-12-12_20:44:38.555740) 20:44:42.283502 run osmo-hlr_10.42.42.2(pid=25556): stderr: | �[0;m�[1;31m20221212204438761 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212204438761 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212204438761 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212204438761 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212204438761 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212204438761 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212204438773 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212204438782 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212204438783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212204438783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:44:42.328865 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25549): Terminating (SIGTERM) 20:44:42.371582 run iperf3-srv_10.42.42.10(pid=25550): Terminating (SIGTERM) 20:44:42.414545 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25551): Terminating (SIGTERM) 20:44:42.457343 run iperf3-srv_10.42.42.10(pid=25552): Terminating (SIGTERM) 20:44:42.500402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25555): Terminating (SIGTERM) 20:44:42.543347 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25558): Terminating (SIGTERM) 20:44:42.586375 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25561): Terminating (SIGTERM) 20:44:42.596265 --- ParallelTerminationStrategy: PID 25549 died... 20:44:42.654150 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25549): Terminated: ok {rc=0} 20:44:42.664460 --- ParallelTerminationStrategy: PID 25550 died... 20:44:42.721409 run iperf3-srv_10.42.42.10(pid=25550): Terminated {rc=256} 20:44:42.731607 --- ParallelTerminationStrategy: PID 25551 died... 20:44:42.788465 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25551): Terminated: ok {rc=0} 20:44:42.798738 --- ParallelTerminationStrategy: PID 25552 died... 20:44:42.855482 run iperf3-srv_10.42.42.10(pid=25552): Terminated {rc=256} 20:44:42.865803 --- ParallelTerminationStrategy: PID 25555 died... 20:44:42.922945 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25555): Terminated: ok {rc=0} 20:44:42.933664 --- ParallelTerminationStrategy: PID 25558 died... 20:44:42.990848 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25558): Terminated: ok {rc=0} 20:44:43.001204 --- ParallelTerminationStrategy: PID 25561 died... 20:44:43.058225 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25561): Terminated: ok {rc=0} 20:44:43.145902 bus /gobi_0: Setting Powered False 20:44:44.254630 bus /gobi_0: Setting Powered False 20:44:45.365290 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25559): Process ended prematurely: osmo-stp_10.42.42.5(pid=25559) [trial-2382↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25559)]