Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1816): Process ended prematurely: osmo-stp_10.42.42.5(pid=1816) [trial-2383↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1816)]
Standard Output
---------------------------------------------- trial-2383 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 22:20:35.367314 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:20:35.378182 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 22:20:35.501084 tst cs_paging_gprs_active.py: using LAC 31887 22:20:35.628593 tst cs_paging_gprs_active.py: using RAC 12 22:20:35.748909 tst cs_paging_gprs_active.py: using CellId 31887 22:20:35.867677 tst cs_paging_gprs_active.py: using BVCI 31888 22:20:35.891207 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:20:35.901950 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:20:35.912370 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:20:35.923261 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:20:35.933784 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:20:35.944200 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:20:35.954960 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:20:35.965451 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:20:35.975864 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:20:36.095152 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:20:36.376395 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:20:36.504855 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:20:36.823708 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1805): Launched 22:20:37.089186 run iperf3-srv_10.42.42.10(pid=1806): Launched 22:20:37.275520 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:20:37.402793 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:20:37.720493 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1807): Launched 22:20:37.984629 run iperf3-srv_10.42.42.10(pid=1808): Launched 22:20:38.170867 tst cs_paging_gprs_active.py:38: start network... 22:20:38.297797 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:20:38.789870 run create_hlr_db(pid=1809): Launched 22:20:38.966121 bus /gobi_6: Setting Powered False 22:20:39.987500 run create_hlr_db(pid=1809): Terminated: ok {rc=0} 22:20:40.421850 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1811): Launched 22:20:40.750669 run osmo-hlr_10.42.42.2(pid=1812): Launched 22:20:40.872304 run osmo-stp_10.42.42.5: Starting osmo-stp 22:20:41.443057 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1815): Launched 22:20:41.771351 run osmo-stp_10.42.42.5(pid=1816): Launched 22:20:41.890331 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:20:42.459875 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1818): Launched 22:20:42.576660 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:20:42.862542 run patchelf(pid=1820): Launched 22:20:43.053650 run osmo-stp_10.42.42.5(pid=1816): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1816)] 22:20:43.193773 run osmo-stp_10.42.42.5(pid=1816): stdout: | (launched: 2022-12-12_22:20:41.609893) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:20:43.333798 run osmo-stp_10.42.42.5(pid=1816): stderr: | �[0;m�[38;5;43m20221212222041802 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212222041802 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212222041802 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212222041802 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212222041803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212222041803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212222041803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:20:43.469194 run osmo-stp_10.42.42.5(pid=1816): stdout: | (launched: 2022-12-12_22:20:41.609893) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:20:43.603340 run osmo-stp_10.42.42.5(pid=1816): stderr: | �[0;m�[38;5;43m20221212222041802 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212222041802 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212222041802 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212222041802 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212222041803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212222041803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212222041803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:20:43.760743 run patchelf(pid=1820): Terminating (SIGINT) 22:20:43.944250 run patchelf(pid=1820): Terminated: ok {rc=0} 22:20:43.977985 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1816): Process ended prematurely: osmo-stp_10.42.42.5(pid=1816) [trial-2383↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1816)] [trial-2383↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 22:20:43.987925 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 22:20:44.051437 run osmo-hlr_10.42.42.2(pid=1812): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1812)] 22:20:44.102974 run osmo-hlr_10.42.42.2(pid=1812): stdout: | (launched: 2022-12-12_22:20:40.587971) 22:20:44.154709 run osmo-hlr_10.42.42.2(pid=1812): stderr: | �[0;m�[1;31m20221212222040788 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212222040789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212222040789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212222040789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212222040789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212222040789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212222040801 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212222040809 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212222040810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212222040810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:20:44.199377 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1805): Terminating (SIGTERM) 22:20:44.241448 run iperf3-srv_10.42.42.10(pid=1806): Terminating (SIGTERM) 22:20:44.283786 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1807): Terminating (SIGTERM) 22:20:44.325505 run iperf3-srv_10.42.42.10(pid=1808): Terminating (SIGTERM) 22:20:44.367685 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1811): Terminating (SIGTERM) 22:20:44.409529 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1815): Terminating (SIGTERM) 22:20:44.451311 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1818): Terminating (SIGTERM) 22:20:44.461199 --- ParallelTerminationStrategy: PID 1805 died... 22:20:44.517292 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1805): Terminated: ok {rc=0} 22:20:44.527214 --- ParallelTerminationStrategy: PID 1806 died... 22:20:44.582226 run iperf3-srv_10.42.42.10(pid=1806): Terminated {rc=256} 22:20:44.592338 --- ParallelTerminationStrategy: PID 1807 died... 22:20:44.647474 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1807): Terminated: ok {rc=0} 22:20:44.657751 --- ParallelTerminationStrategy: PID 1808 died... 22:20:44.713187 run iperf3-srv_10.42.42.10(pid=1808): Terminated {rc=256} 22:20:44.723284 --- ParallelTerminationStrategy: PID 1811 died... 22:20:44.778463 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1811): Terminated: ok {rc=0} 22:20:44.788631 --- ParallelTerminationStrategy: PID 1815 died... 22:20:44.844265 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1815): Terminated: ok {rc=0} 22:20:44.854517 --- ParallelTerminationStrategy: PID 1818 died... 22:20:44.910222 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1818): Terminated: ok {rc=0} 22:20:44.997780 bus /gobi_0: Setting Powered False 22:20:46.103883 bus /gobi_0: Setting Powered False 22:20:47.215653 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1816): Process ended prematurely: osmo-stp_10.42.42.5(pid=1816) [trial-2383↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1816)]