Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=4159): Process ended prematurely: osmo-stp_10.42.42.5(pid=4159) [trial-2383↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4159)]
Standard Output
---------------------------------------------- trial-2383 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 22:46:19.530544 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:46:19.541311 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 22:46:19.682128 tst cs_paging_gprs_active.py: using LAC 32024 22:46:19.803993 tst cs_paging_gprs_active.py: using RAC 149 22:46:19.927317 tst cs_paging_gprs_active.py: using CellId 32024 22:46:20.050276 tst cs_paging_gprs_active.py: using BVCI 32025 22:46:20.074009 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:46:20.084772 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:46:20.095308 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:46:20.106290 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:46:20.117202 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:46:20.128012 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:46:20.139067 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:46:20.149788 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:46:20.160616 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:46:20.281798 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:46:20.564243 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:46:20.692733 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:46:21.011295 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4149): Launched 22:46:21.276093 run iperf3-srv_10.42.42.10(pid=4150): Launched 22:46:21.463614 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:46:21.591758 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:46:21.910929 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4151): Launched 22:46:22.176141 run iperf3-srv_10.42.42.10(pid=4152): Launched 22:46:22.363838 tst cs_paging_gprs_active.py:38: start network... 22:46:22.492395 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:46:22.976122 run create_hlr_db(pid=4153): Launched 22:46:23.153553 bus /gobi_6: Setting Powered False 22:46:24.173890 run create_hlr_db(pid=4153): Terminated: ok {rc=0} 22:46:24.609804 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4155): Launched 22:46:24.938252 run osmo-hlr_10.42.42.2(pid=4156): Launched 22:46:25.061256 run osmo-stp_10.42.42.5: Starting osmo-stp 22:46:25.631436 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4158): Launched 22:46:25.959216 run osmo-stp_10.42.42.5(pid=4159): Launched 22:46:26.078926 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:46:26.652234 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4161): Launched 22:46:26.769228 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:46:27.054594 run patchelf(pid=4162): Launched 22:46:27.246024 run osmo-stp_10.42.42.5(pid=4159): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4159)] 22:46:27.385805 run osmo-stp_10.42.42.5(pid=4159): stdout: | (launched: 2022-12-12_22:46:25.798166) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:46:27.526343 run osmo-stp_10.42.42.5(pid=4159): stderr: | �[0;m�[38;5;43m20221212224625990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212224625991 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212224625991 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212224625991 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212224625992 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212224625992 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212224625992 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:46:27.662023 run osmo-stp_10.42.42.5(pid=4159): stdout: | (launched: 2022-12-12_22:46:25.798166) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:46:27.796597 run osmo-stp_10.42.42.5(pid=4159): stderr: | �[0;m�[38;5;43m20221212224625990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212224625991 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212224625991 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212224625991 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212224625992 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212224625992 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212224625992 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:46:27.953106 run patchelf(pid=4162): Terminating (SIGINT) 22:46:28.137547 run patchelf(pid=4162): Terminated: ok {rc=0} 22:46:28.171133 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4159): Process ended prematurely: osmo-stp_10.42.42.5(pid=4159) [trial-2383↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4159)] [trial-2383↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 22:46:28.180750 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 22:46:28.243540 run osmo-hlr_10.42.42.2(pid=4156): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4156)] 22:46:28.294754 run osmo-hlr_10.42.42.2(pid=4156): stdout: | (launched: 2022-12-12_22:46:24.777218) 22:46:28.346433 run osmo-hlr_10.42.42.2(pid=4156): stderr: | �[0;m�[1;31m20221212224624976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212224624976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212224624976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212224624976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212224624976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212224624976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212224624989 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212224624997 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212224624997 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212224624997 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:46:28.390790 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4149): Terminating (SIGTERM) 22:46:28.432732 run iperf3-srv_10.42.42.10(pid=4150): Terminating (SIGTERM) 22:46:28.474981 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4151): Terminating (SIGTERM) 22:46:28.516779 run iperf3-srv_10.42.42.10(pid=4152): Terminating (SIGTERM) 22:46:28.558658 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4155): Terminating (SIGTERM) 22:46:28.600353 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4158): Terminating (SIGTERM) 22:46:28.642649 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4161): Terminating (SIGTERM) 22:46:28.652347 --- ParallelTerminationStrategy: PID 4149 died... 22:46:28.708220 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4149): Terminated: ok {rc=0} 22:46:28.718324 --- ParallelTerminationStrategy: PID 4150 died... 22:46:28.773147 run iperf3-srv_10.42.42.10(pid=4150): Terminated {rc=256} 22:46:28.783115 --- ParallelTerminationStrategy: PID 4151 died... 22:46:28.838703 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4151): Terminated: ok {rc=0} 22:46:28.848634 --- ParallelTerminationStrategy: PID 4152 died... 22:46:28.903992 run iperf3-srv_10.42.42.10(pid=4152): Terminated {rc=256} 22:46:28.914410 --- ParallelTerminationStrategy: PID 4155 died... 22:46:28.969910 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4155): Terminated: ok {rc=0} 22:46:28.979865 --- ParallelTerminationStrategy: PID 4158 died... 22:46:29.035109 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4158): Terminated: ok {rc=0} 22:46:29.045262 --- ParallelTerminationStrategy: PID 4161 died... 22:46:29.100135 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4161): Terminated: ok {rc=0} 22:46:29.186258 bus /gobi_0: Setting Powered False 22:46:30.292465 bus /gobi_0: Setting Powered False 22:46:31.422006 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4159): Process ended prematurely: osmo-stp_10.42.42.5(pid=4159) [trial-2383↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4159)]