Failed
dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-sysmocell5000+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3799): Process ended prematurely: osmo-stp_10.42.42.5(pid=3799) [trial-2383↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3799)]
Standard Output
---------------------------------------------- trial-2383 dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 22:41:16.337832 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:41:16.352905 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 22:41:16.553224 tst switch_tch_pdch.py: using LAC 31996 22:41:16.690419 tst switch_tch_pdch.py: using RAC 121 22:41:16.818357 tst switch_tch_pdch.py: using CellId 31996 22:41:16.939230 tst switch_tch_pdch.py: using BVCI 31997 22:41:16.963513 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:41:16.975571 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:41:16.987620 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:41:17.001864 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:41:17.015121 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:41:17.027633 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:41:17.039765 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:41:17.053647 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 22:41:17.174361 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 22:41:17.452835 tst switch_tch_pdch.py:51: start network... 22:41:17.577426 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:41:18.021646 run create_hlr_db(pid=3793): Launched 22:41:18.143082 bus /gobi_6: Setting Powered False 22:41:19.214792 run create_hlr_db(pid=3793): Terminated: ok {rc=0} 22:41:19.587330 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3795): Launched 22:41:19.885574 run osmo-hlr_10.42.42.2(pid=3796): Launched 22:41:19.993859 run osmo-stp_10.42.42.5: Starting osmo-stp 22:41:20.486612 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3798): Launched 22:41:20.784140 run osmo-stp_10.42.42.5(pid=3799): Launched 22:41:20.897389 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:41:21.398898 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3801): Launched 22:41:21.505023 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:41:21.765158 run patchelf(pid=3802): Launched 22:41:21.940370 run osmo-stp_10.42.42.5(pid=3799): ERR: Terminated: ERROR {rc=1} [trial-2383↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3799)] 22:41:22.068274 run osmo-stp_10.42.42.5(pid=3799): stdout: | (launched: 2022-12-12_22:41:20.637574) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:41:22.196159 run osmo-stp_10.42.42.5(pid=3799): stderr: | �[0;m�[38;5;43m20221212224120809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212224120809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212224120810 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212224120810 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212224120811 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212224120811 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212224120811 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:41:22.319801 run osmo-stp_10.42.42.5(pid=3799): stdout: | (launched: 2022-12-12_22:41:20.637574) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:41:22.442123 run osmo-stp_10.42.42.5(pid=3799): stderr: | �[0;m�[38;5;43m20221212224120809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212224120809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212224120810 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212224120810 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212224120811 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212224120811 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212224120811 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:41:22.586407 run patchelf(pid=3802): Terminating (SIGINT) 22:41:22.755357 run patchelf(pid=3802): Terminated: ok {rc=0} 22:41:22.785999 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=3799): Process ended prematurely: osmo-stp_10.42.42.5(pid=3799) [trial-2383↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3799)] [trial-2383↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 22:41:22.794493 tst switch_tch_pdch.py:54: Test FAILED (6.4 sec) 22:41:22.854184 run osmo-hlr_10.42.42.2(pid=3796): ERR: Terminated: ERROR {rc=237} [trial-2383↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3796)] 22:41:22.902765 run osmo-hlr_10.42.42.2(pid=3796): stdout: | (launched: 2022-12-12_22:41:19.738971) 22:41:22.951873 run osmo-hlr_10.42.42.2(pid=3796): stderr: | �[0;m�[1;31m20221212224119914 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212224119914 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212224119914 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212224119914 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212224119914 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212224119914 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212224119950 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212224119960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212224119961 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212224119961 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:41:22.993251 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3795): Terminating (SIGTERM) 22:41:23.032768 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3798): Terminating (SIGTERM) 22:41:23.072165 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3801): Terminating (SIGTERM) 22:41:23.081553 --- ParallelTerminationStrategy: PID 3795 died... 22:41:23.134511 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3795): Terminated: ok {rc=0} 22:41:23.144282 --- ParallelTerminationStrategy: PID 3798 died... 22:41:23.196334 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3798): Terminated: ok {rc=0} 22:41:23.205922 --- ParallelTerminationStrategy: PID 3801 died... 22:41:23.258344 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3801): Terminated: ok {rc=0} 22:41:23.345311 bus /gobi_0: Setting Powered False 22:41:24.448276 bus /gobi_0: Setting Powered False 22:41:25.557791 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3799): Process ended prematurely: osmo-stp_10.42.42.5(pid=3799) [trial-2383↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3799)]