Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=7336): Process ended prematurely: osmo-stp_10.42.42.5(pid=7336) [trial-2383↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7336)]
Standard Output
---------------------------------------------- trial-2383 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 23:16:28.642752 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 23:16:28.654296 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 23:16:28.798256 tst ping_idle_ping.py: using LAC 32183 23:16:28.925938 tst ping_idle_ping.py: using RAC 53 23:16:29.052120 tst ping_idle_ping.py: using CellId 32183 23:16:29.182834 tst ping_idle_ping.py: using BVCI 32184 23:16:29.207839 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 23:16:29.219159 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 23:16:29.230154 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 23:16:29.241235 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 23:16:29.252101 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 23:16:29.263063 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 23:16:29.274664 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 23:16:29.285700 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 23:16:29.574726 tst ping_idle_ping.py:24: start network... 23:16:29.708872 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:16:30.224907 run create_hlr_db(pid=7330): Launched 23:16:30.412899 bus /gobi_6: Setting Powered False 23:16:31.425753 run create_hlr_db(pid=7330): Terminated: ok {rc=0} 23:16:31.862088 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7332): Launched 23:16:32.304789 run osmo-hlr_10.42.42.2(pid=7333): Launched 23:16:32.422657 run osmo-stp_10.42.42.5: Starting osmo-stp 23:16:32.981518 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7335): Launched 23:16:33.304658 run osmo-stp_10.42.42.5(pid=7336): Launched 23:16:33.422566 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:16:33.985570 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7338): Launched 23:16:34.100464 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:16:34.383227 run patchelf(pid=7339): Launched 23:16:34.572542 run osmo-stp_10.42.42.5(pid=7336): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7336)] 23:16:34.710557 run osmo-stp_10.42.42.5(pid=7336): stdout: | (launched: 2022-12-12_23:16:33.145762) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:16:34.848532 run osmo-stp_10.42.42.5(pid=7336): stderr: | �[0;m�[38;5;43m20221212231633338 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212231633338 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212231633338 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212231633339 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212231633339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212231633339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212231633339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:16:34.981811 run osmo-stp_10.42.42.5(pid=7336): stdout: | (launched: 2022-12-12_23:16:33.145762) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:16:35.114013 run osmo-stp_10.42.42.5(pid=7336): stderr: | �[0;m�[38;5;43m20221212231633338 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212231633338 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212231633338 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212231633339 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212231633339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212231633339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212231633339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:16:35.269410 run patchelf(pid=7339): Terminating (SIGINT) 23:16:35.452306 run patchelf(pid=7339): Terminated: ok {rc=0} 23:16:35.485204 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=7336): Process ended prematurely: osmo-stp_10.42.42.5(pid=7336) [trial-2383↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7336)] [trial-2383↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 23:16:35.494345 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 23:16:35.556455 run osmo-hlr_10.42.42.2(pid=7333): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7333)] 23:16:35.607507 run osmo-hlr_10.42.42.2(pid=7333): stdout: | (launched: 2022-12-12_23:16:32.020863) 23:16:35.659058 run osmo-hlr_10.42.42.2(pid=7333): stderr: | �[0;m�[1;31m20221212231632234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212231632234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212231632234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212231632234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212231632234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212231632234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212231632247 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212231632260 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212231632260 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212231632260 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:16:35.703157 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7332): Terminating (SIGTERM) 23:16:35.744818 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7335): Terminating (SIGTERM) 23:16:35.786525 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7338): Terminating (SIGTERM) 23:16:35.796331 --- ParallelTerminationStrategy: PID 7332 died... 23:16:35.851834 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7332): Terminated: ok {rc=0} 23:16:35.861985 --- ParallelTerminationStrategy: PID 7335 died... 23:16:35.917117 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7335): Terminated: ok {rc=0} 23:16:35.927184 --- ParallelTerminationStrategy: PID 7338 died... 23:16:35.982232 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7338): Terminated: ok {rc=0} 23:16:36.069324 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7336): Process ended prematurely: osmo-stp_10.42.42.5(pid=7336) [trial-2383↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7336)]