Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=1401): Process ended prematurely: osmo-stp_10.42.42.5(pid=1401) [trial-2383↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1401)]
Standard Output
---------------------------------------------- trial-2383 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 22:14:39.353543 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:14:39.364217 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:14:39.513646 tst cs_paging_gprs_active.py: using LAC 31855 22:14:39.637731 tst cs_paging_gprs_active.py: using RAC 235 22:14:39.761788 tst cs_paging_gprs_active.py: using CellId 31855 22:14:39.886325 tst cs_paging_gprs_active.py: using BVCI 31856 22:14:39.910192 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:14:39.920879 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:14:39.931657 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:14:39.942868 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:14:39.954115 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:14:39.964789 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:14:39.975508 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:14:39.986007 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:14:39.996687 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:14:40.118675 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:14:40.421458 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:14:40.561534 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:14:40.904249 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1381): Launched 22:14:41.190016 run iperf3-srv_10.42.42.10(pid=1382): Launched 22:14:41.394044 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:14:41.533685 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:14:41.876876 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1383): Launched 22:14:42.162624 run iperf3-srv_10.42.42.10(pid=1384): Launched 22:14:42.365936 tst cs_paging_gprs_active.py:38: start network... 22:14:42.509523 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:14:43.033142 run create_hlr_db(pid=1395): Launched 22:14:43.225237 bus /gobi_6: Setting Powered False 22:14:44.245623 run create_hlr_db(pid=1395): Terminated: ok {rc=0} 22:14:44.661878 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1397): Launched 22:14:44.982479 run osmo-hlr_10.42.42.2(pid=1398): Launched 22:14:45.102137 run osmo-stp_10.42.42.5: Starting osmo-stp 22:14:45.680740 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1400): Launched 22:14:46.191998 run osmo-stp_10.42.42.5(pid=1401): Launched 22:14:46.379719 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:14:46.981677 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1403): Launched 22:14:47.103700 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:14:47.397777 run patchelf(pid=1404): Launched 22:14:47.592513 run osmo-stp_10.42.42.5(pid=1401): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1401)] 22:14:47.734606 run osmo-stp_10.42.42.5(pid=1401): stdout: | (launched: 2022-12-12_22:14:45.851438) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:14:47.876546 run osmo-stp_10.42.42.5(pid=1401): stderr: | �[0;m�[38;5;43m20221212221446115 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212221446115 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212221446116 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212221446116 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212221446117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212221446117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212221446117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:14:48.014239 run osmo-stp_10.42.42.5(pid=1401): stdout: | (launched: 2022-12-12_22:14:45.851438) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:14:48.150554 run osmo-stp_10.42.42.5(pid=1401): stderr: | �[0;m�[38;5;43m20221212221446115 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212221446115 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212221446116 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212221446116 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212221446117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212221446117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212221446117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:14:48.309798 run patchelf(pid=1404): Terminating (SIGINT) 22:14:48.496844 run patchelf(pid=1404): Terminated: ok {rc=0} 22:14:48.531435 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1401): Process ended prematurely: osmo-stp_10.42.42.5(pid=1401) [trial-2383↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1401)] [trial-2383↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 22:14:48.541443 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 22:14:48.605728 run osmo-hlr_10.42.42.2(pid=1398): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1398)] 22:14:48.657691 run osmo-hlr_10.42.42.2(pid=1398): stdout: | (launched: 2022-12-12_22:14:44.820744) 22:14:48.710369 run osmo-hlr_10.42.42.2(pid=1398): stderr: | �[0;m�[1;31m20221212221445015 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212221445015 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212221445015 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212221445015 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212221445015 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212221445015 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212221445028 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212221445037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212221445037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212221445037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:14:48.755035 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1381): Terminating (SIGTERM) 22:14:48.797606 run iperf3-srv_10.42.42.10(pid=1382): Terminating (SIGTERM) 22:14:48.840105 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1383): Terminating (SIGTERM) 22:14:48.882463 run iperf3-srv_10.42.42.10(pid=1384): Terminating (SIGTERM) 22:14:48.924877 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1397): Terminating (SIGTERM) 22:14:48.967298 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1400): Terminating (SIGTERM) 22:14:49.009568 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1403): Terminating (SIGTERM) 22:14:49.019315 --- ParallelTerminationStrategy: PID 1381 died... 22:14:49.076089 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1381): Terminated: ok {rc=0} 22:14:49.086201 --- ParallelTerminationStrategy: PID 1382 died... 22:14:49.142224 run iperf3-srv_10.42.42.10(pid=1382): Terminated {rc=256} 22:14:49.152488 --- ParallelTerminationStrategy: PID 1383 died... 22:14:49.208918 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1383): Terminated: ok {rc=0} 22:14:49.219273 --- ParallelTerminationStrategy: PID 1384 died... 22:14:49.275088 run iperf3-srv_10.42.42.10(pid=1384): Terminated {rc=256} 22:14:49.285482 --- ParallelTerminationStrategy: PID 1397 died... 22:14:49.341460 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1397): Terminated: ok {rc=0} 22:14:49.351779 --- ParallelTerminationStrategy: PID 1400 died... 22:14:49.407837 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1400): Terminated: ok {rc=0} 22:14:49.418212 --- ParallelTerminationStrategy: PID 1403 died... 22:14:49.474927 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1403): Terminated: ok {rc=0} 22:14:49.563649 bus /gobi_0: Setting Powered False 22:14:50.669782 bus /gobi_0: Setting Powered False 22:14:51.776856 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1401): Process ended prematurely: osmo-stp_10.42.42.5(pid=1401) [trial-2383↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1401)]