Failed
dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=16305): Process ended prematurely: osmo-stp_10.42.42.5(pid=16305) [trial-2384↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16305)]
Standard Output
---------------------------------------------- trial-2384 dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 01:16:47.832402 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:16:47.844552 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 01:16:48.000479 tst switch_tch_pdch.py: using LAC 32622 01:16:48.127376 tst switch_tch_pdch.py: using RAC 237 01:16:48.254271 tst switch_tch_pdch.py: using CellId 32622 01:16:48.381285 tst switch_tch_pdch.py: using BVCI 32623 01:16:48.406267 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:16:48.418294 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:16:48.430211 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:16:48.442443 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:16:48.454781 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:16:48.467187 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:16:48.479630 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:16:48.491989 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 01:16:48.611258 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 01:16:48.905747 tst switch_tch_pdch.py:51: start network... 01:16:49.040334 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:16:49.546258 run create_hlr_db(pid=16299): Launched 01:16:49.733770 bus /gobi_6: Setting Powered False 01:16:50.753042 run create_hlr_db(pid=16299): Terminated: ok {rc=0} 01:16:51.181660 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16301): Launched 01:16:51.504695 run osmo-hlr_10.42.42.2(pid=16302): Launched 01:16:51.622815 run osmo-stp_10.42.42.5: Starting osmo-stp 01:16:52.183074 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16304): Launched 01:16:52.505788 run osmo-stp_10.42.42.5(pid=16305): Launched 01:16:52.623118 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:16:53.185678 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16307): Launched 01:16:53.300746 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:16:53.583703 run patchelf(pid=16308): Launched 01:16:53.771968 run osmo-stp_10.42.42.5(pid=16305): ERR: Terminated: ERROR {rc=1} [trial-2384↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16305)] 01:16:53.909463 run osmo-stp_10.42.42.5(pid=16305): stdout: | (launched: 2022-12-13_01:16:52.346450) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:16:54.047587 run osmo-stp_10.42.42.5(pid=16305): stderr: | �[0;m�[38;5;43m20221213011652535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011652535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011652535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011652536 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011652536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011652536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011652536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:16:54.180717 run osmo-stp_10.42.42.5(pid=16305): stdout: | (launched: 2022-12-13_01:16:52.346450) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:16:54.312726 run osmo-stp_10.42.42.5(pid=16305): stderr: | �[0;m�[38;5;43m20221213011652535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011652535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011652535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011652536 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011652536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011652536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011652536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:16:54.467552 run patchelf(pid=16308): Terminating (SIGINT) 01:16:54.649590 run patchelf(pid=16308): Terminated: ok {rc=0} 01:16:54.682411 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=16305): Process ended prematurely: osmo-stp_10.42.42.5(pid=16305) [trial-2384↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16305)] [trial-2384↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54] 01:16:54.691563 tst switch_tch_pdch.py:54: Test FAILED (6.8 sec) 01:16:54.754067 run osmo-hlr_10.42.42.2(pid=16302): ERR: Terminated: ERROR {rc=237} [trial-2384↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16302)] 01:16:54.805302 run osmo-hlr_10.42.42.2(pid=16302): stdout: | (launched: 2022-12-13_01:16:51.345009) 01:16:54.857241 run osmo-hlr_10.42.42.2(pid=16302): stderr: | �[0;m�[1;31m20221213011651538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213011651538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213011651538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213011651538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213011651538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213011651538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213011651550 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213011651559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213011651559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213011651559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:16:54.901455 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16301): Terminating (SIGTERM) 01:16:54.943131 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16304): Terminating (SIGTERM) 01:16:54.984830 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16307): Terminating (SIGTERM) 01:16:54.994240 --- ParallelTerminationStrategy: PID 16301 died... 01:16:55.049875 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16301): Terminated: ok {rc=0} 01:16:55.059958 --- ParallelTerminationStrategy: PID 16304 died... 01:16:55.115618 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16304): Terminated: ok {rc=0} 01:16:55.125733 --- ParallelTerminationStrategy: PID 16307 died... 01:16:55.181155 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16307): Terminated: ok {rc=0} 01:16:55.267398 bus /gobi_0: Setting Powered False 01:16:56.374428 bus /gobi_0: Setting Powered False 01:16:57.485603 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16305): Process ended prematurely: osmo-stp_10.42.42.5(pid=16305) [trial-2384↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16305)]