Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=16155): Process ended prematurely: osmo-stp_10.42.42.5(pid=16155) [trial-2384↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16155)]
Standard Output
---------------------------------------------- trial-2384 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 01:14:36.784019 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:36.796095 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 01:14:36.926090 tst ping_idle_ping.py: using LAC 32611 01:14:37.047919 tst ping_idle_ping.py: using RAC 226 01:14:37.169554 tst ping_idle_ping.py: using CellId 32611 01:14:37.294343 tst ping_idle_ping.py: using BVCI 32612 01:14:37.317804 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:37.328831 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:37.339637 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:37.350405 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:37.361013 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:37.371583 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:37.382410 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:14:37.393160 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 01:14:37.691093 tst ping_idle_ping.py:24: start network... 01:14:37.828208 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:14:38.351297 run create_hlr_db(pid=16149): Launched 01:14:38.542551 bus /gobi_6: Setting Powered False 01:14:39.563845 run create_hlr_db(pid=16149): Terminated: ok {rc=0} 01:14:39.978664 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16151): Launched 01:14:40.289535 run osmo-hlr_10.42.42.2(pid=16152): Launched 01:14:40.403160 run osmo-stp_10.42.42.5: Starting osmo-stp 01:14:40.939089 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16154): Launched 01:14:41.249108 run osmo-stp_10.42.42.5(pid=16155): Launched 01:14:41.360494 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:14:41.899448 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16157): Launched 01:14:42.008622 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:14:42.279352 run patchelf(pid=16158): Launched 01:14:42.459227 run osmo-stp_10.42.42.5(pid=16155): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16155)] 01:14:42.590250 run osmo-stp_10.42.42.5(pid=16155): stdout: | (launched: 2022-12-13_01:14:41.095150) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:14:42.721359 run osmo-stp_10.42.42.5(pid=16155): stderr: | �[0;m�[38;5;43m20221213011441266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011441266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011441266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011441267 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011441267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011441267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011441267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:14:42.847710 run osmo-stp_10.42.42.5(pid=16155): stdout: | (launched: 2022-12-13_01:14:41.095150) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:14:42.973232 run osmo-stp_10.42.42.5(pid=16155): stderr: | �[0;m�[38;5;43m20221213011441266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011441266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011441266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011441267 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011441267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011441267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011441267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:14:43.119911 run patchelf(pid=16158): Terminating (SIGINT) 01:14:43.293751 run patchelf(pid=16158): Terminated: ok {rc=0} 01:14:43.325102 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=16155): Process ended prematurely: osmo-stp_10.42.42.5(pid=16155) [trial-2384↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16155)] [trial-2384↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 01:14:43.333769 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 01:14:43.394213 run osmo-hlr_10.42.42.2(pid=16152): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16152)] 01:14:43.443457 run osmo-hlr_10.42.42.2(pid=16152): stdout: | (launched: 2022-12-13_01:14:40.134602) 01:14:43.493374 run osmo-hlr_10.42.42.2(pid=16152): stderr: | �[0;m�[1;31m20221213011440312 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213011440312 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213011440312 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213011440312 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213011440312 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213011440313 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213011440325 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213011440336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213011440336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213011440336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:14:43.536219 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16151): Terminating (SIGTERM) 01:14:43.576109 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16154): Terminating (SIGTERM) 01:14:43.616111 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16157): Terminating (SIGTERM) 01:14:43.626256 --- ParallelTerminationStrategy: PID 16151 died... 01:14:43.685759 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16151): Terminated: ok {rc=0} 01:14:43.696132 --- ParallelTerminationStrategy: PID 16154 died... 01:14:43.753430 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16154): Terminated: ok {rc=0} 01:14:43.764668 --- ParallelTerminationStrategy: PID 16157 died... 01:14:43.822475 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16157): Terminated: ok {rc=0} 01:14:43.910264 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16155): Process ended prematurely: osmo-stp_10.42.42.5(pid=16155) [trial-2384↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16155)]