Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=16746): Process ended prematurely: osmo-stp_10.42.42.5(pid=16746) [trial-2384↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16746)]
Standard Output
---------------------------------------------- trial-2384 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 01:23:02.326471 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:02.337923 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 01:23:02.483041 tst cs_paging_gprs_active.py: using LAC 32655 01:23:02.601105 tst cs_paging_gprs_active.py: using RAC 15 01:23:02.720418 tst cs_paging_gprs_active.py: using CellId 32655 01:23:02.838250 tst cs_paging_gprs_active.py: using BVCI 32656 01:23:02.861513 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:02.872791 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:02.884005 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:02.895166 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:02.906332 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:02.917412 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:02.928619 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:02.939652 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:02.950973 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:23:03.073427 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:23:03.368817 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:23:03.505283 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:23:03.842033 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16736): Launched 01:23:04.122595 run iperf3-srv_10.42.42.10(pid=16737): Launched 01:23:04.321338 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:23:04.456788 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:23:04.793843 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16738): Launched 01:23:05.074635 run iperf3-srv_10.42.42.10(pid=16739): Launched 01:23:05.274179 tst cs_paging_gprs_active.py:38: start network... 01:23:05.410103 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:23:05.927612 run create_hlr_db(pid=16740): Launched 01:23:06.115922 bus /gobi_6: Setting Powered False 01:23:07.137246 run create_hlr_db(pid=16740): Terminated: ok {rc=0} 01:23:07.548009 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16742): Launched 01:23:07.853810 run osmo-hlr_10.42.42.2(pid=16743): Launched 01:23:07.974716 run osmo-stp_10.42.42.5: Starting osmo-stp 01:23:08.512801 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16745): Launched 01:23:08.819609 run osmo-stp_10.42.42.5(pid=16746): Launched 01:23:08.930730 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:23:09.465420 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16748): Launched 01:23:09.574776 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:23:09.842947 run patchelf(pid=16749): Launched 01:23:10.021124 run osmo-stp_10.42.42.5(pid=16746): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16746)] 01:23:10.151097 run osmo-stp_10.42.42.5(pid=16746): stdout: | (launched: 2022-12-13_01:23:08.668277) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:23:10.282017 run osmo-stp_10.42.42.5(pid=16746): stderr: | �[0;m�[38;5;43m20221213012308836 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213012308836 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213012308837 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213012308837 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213012308838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213012308838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213012308838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:23:10.407939 run osmo-stp_10.42.42.5(pid=16746): stdout: | (launched: 2022-12-13_01:23:08.668277) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:23:10.533821 run osmo-stp_10.42.42.5(pid=16746): stderr: | �[0;m�[38;5;43m20221213012308836 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213012308836 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213012308837 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213012308837 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213012308838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213012308838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213012308838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:23:10.679974 run patchelf(pid=16749): Terminating (SIGINT) 01:23:10.852051 run patchelf(pid=16749): Terminated: ok {rc=0} 01:23:10.883904 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16746): Process ended prematurely: osmo-stp_10.42.42.5(pid=16746) [trial-2384↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16746)] [trial-2384↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 01:23:10.893467 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 01:23:10.953344 run osmo-hlr_10.42.42.2(pid=16743): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16743)] 01:23:11.003002 run osmo-hlr_10.42.42.2(pid=16743): stdout: | (launched: 2022-12-13_01:23:07.703472) 01:23:11.053249 run osmo-hlr_10.42.42.2(pid=16743): stderr: | �[0;m�[1;31m20221213012307876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213012307876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213012307876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213012307876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213012307876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213012307876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213012307889 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213012307897 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213012307897 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213012307897 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:23:11.095927 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16736): Terminating (SIGTERM) 01:23:11.136116 run iperf3-srv_10.42.42.10(pid=16737): Terminating (SIGTERM) 01:23:11.176425 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16738): Terminating (SIGTERM) 01:23:11.216832 run iperf3-srv_10.42.42.10(pid=16739): Terminating (SIGTERM) 01:23:11.257343 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16742): Terminating (SIGTERM) 01:23:11.297825 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16745): Terminating (SIGTERM) 01:23:11.338650 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16748): Terminating (SIGTERM) 01:23:11.347480 --- ParallelTerminationStrategy: PID 16736 died... 01:23:11.401665 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16736): Terminated: ok {rc=0} 01:23:11.411090 --- ParallelTerminationStrategy: PID 16737 died... 01:23:11.463815 run iperf3-srv_10.42.42.10(pid=16737): Terminated {rc=256} 01:23:11.473486 --- ParallelTerminationStrategy: PID 16738 died... 01:23:11.526048 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16738): Terminated: ok {rc=0} 01:23:11.535617 --- ParallelTerminationStrategy: PID 16739 died... 01:23:11.588250 run iperf3-srv_10.42.42.10(pid=16739): Terminated {rc=256} 01:23:11.597782 --- ParallelTerminationStrategy: PID 16742 died... 01:23:11.650294 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16742): Terminated: ok {rc=0} 01:23:11.659728 --- ParallelTerminationStrategy: PID 16745 died... 01:23:11.712375 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16745): Terminated: ok {rc=0} 01:23:11.721846 --- ParallelTerminationStrategy: PID 16748 died... 01:23:11.774822 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16748): Terminated: ok {rc=0} 01:23:11.858311 bus /gobi_0: Setting Powered False 01:23:12.966052 bus /gobi_0: Setting Powered False 01:23:14.075173 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16746): Process ended prematurely: osmo-stp_10.42.42.5(pid=16746) [trial-2384↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16746)]