Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=11429): Process ended prematurely: osmo-stp_10.42.42.5(pid=11429) [trial-2384↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11429)]
Standard Output
---------------------------------------------- trial-2384 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 00:25:40.895815 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:25:40.906757 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:25:41.048500 tst cs_paging_gprs_active.py: using LAC 32353 00:25:41.176175 tst cs_paging_gprs_active.py: using RAC 223 00:25:41.303113 tst cs_paging_gprs_active.py: using CellId 32353 00:25:41.432440 tst cs_paging_gprs_active.py: using BVCI 32354 00:25:41.457624 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:25:41.469077 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:25:41.480027 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:25:41.491696 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:25:41.503260 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:25:41.514812 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:25:41.526437 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:25:41.537872 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:25:41.549470 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:25:41.668619 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:25:41.948059 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:25:42.073343 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:25:42.388462 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11419): Launched 00:25:42.650770 run iperf3-srv_10.42.42.10(pid=11420): Launched 00:25:42.834220 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:25:42.959489 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:25:43.273599 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11421): Launched 00:25:43.535231 run iperf3-srv_10.42.42.10(pid=11422): Launched 00:25:43.718496 tst cs_paging_gprs_active.py:38: start network... 00:25:43.843761 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:25:44.334489 run create_hlr_db(pid=11423): Launched 00:25:44.522408 bus /gobi_6: Setting Powered False 00:25:45.532212 run create_hlr_db(pid=11423): Terminated: ok {rc=0} 00:25:45.981756 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11425): Launched 00:25:46.405553 run osmo-hlr_10.42.42.2(pid=11426): Launched 00:25:46.570082 run osmo-stp_10.42.42.5: Starting osmo-stp 00:25:47.192626 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11428): Launched 00:25:47.504658 run osmo-stp_10.42.42.5(pid=11429): Launched 00:25:47.616314 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:25:48.144453 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11431): Launched 00:25:48.252545 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:25:48.517481 run patchelf(pid=11432): Launched 00:25:48.693838 run osmo-stp_10.42.42.5(pid=11429): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11429)] 00:25:48.822850 run osmo-stp_10.42.42.5(pid=11429): stdout: | (launched: 2022-12-13_00:25:47.351527) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:25:48.951740 run osmo-stp_10.42.42.5(pid=11429): stderr: | �[0;m�[38;5;43m20221213002547523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213002547523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213002547524 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213002547524 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213002547524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213002547525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213002547525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:25:49.076366 run osmo-stp_10.42.42.5(pid=11429): stdout: | (launched: 2022-12-13_00:25:47.351527) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:25:49.200218 run osmo-stp_10.42.42.5(pid=11429): stderr: | �[0;m�[38;5;43m20221213002547523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213002547523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213002547524 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213002547524 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213002547524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213002547525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213002547525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:25:49.344906 run patchelf(pid=11432): Terminating (SIGINT) 00:25:49.515335 run patchelf(pid=11432): Terminated: ok {rc=0} 00:25:49.546559 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11429): Process ended prematurely: osmo-stp_10.42.42.5(pid=11429) [trial-2384↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11429)] [trial-2384↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 00:25:49.555492 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 00:25:49.615323 run osmo-hlr_10.42.42.2(pid=11426): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11426)] 00:25:49.664240 run osmo-hlr_10.42.42.2(pid=11426): stdout: | (launched: 2022-12-13_00:25:46.140013) 00:25:49.714092 run osmo-hlr_10.42.42.2(pid=11426): stderr: | �[0;m�[1;31m20221213002546463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213002546464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213002546464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213002546464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213002546464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213002546464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213002546493 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213002546513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213002546514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213002546514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:25:49.756441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11419): Terminating (SIGTERM) 00:25:49.796246 run iperf3-srv_10.42.42.10(pid=11420): Terminating (SIGTERM) 00:25:49.836115 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11421): Terminating (SIGTERM) 00:25:49.875759 run iperf3-srv_10.42.42.10(pid=11422): Terminating (SIGTERM) 00:25:49.915697 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11425): Terminating (SIGTERM) 00:25:49.955474 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11428): Terminating (SIGTERM) 00:25:49.995200 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11431): Terminating (SIGTERM) 00:25:50.004369 --- ParallelTerminationStrategy: PID 11419 died... 00:25:50.057557 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11419): Terminated: ok {rc=0} 00:25:50.066970 --- ParallelTerminationStrategy: PID 11420 died... 00:25:50.119501 run iperf3-srv_10.42.42.10(pid=11420): Terminated {rc=256} 00:25:50.129106 --- ParallelTerminationStrategy: PID 11421 died... 00:25:50.181683 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11421): Terminated: ok {rc=0} 00:25:50.191160 --- ParallelTerminationStrategy: PID 11422 died... 00:25:50.244130 run iperf3-srv_10.42.42.10(pid=11422): Terminated {rc=256} 00:25:50.253710 --- ParallelTerminationStrategy: PID 11425 died... 00:25:50.306623 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11425): Terminated: ok {rc=0} 00:25:50.316131 --- ParallelTerminationStrategy: PID 11428 died... 00:25:50.369298 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11428): Terminated: ok {rc=0} 00:25:50.378854 --- ParallelTerminationStrategy: PID 11431 died... 00:25:50.431701 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11431): Terminated: ok {rc=0} 00:25:50.514909 bus /gobi_0: Setting Powered False 00:25:51.621976 bus /gobi_0: Setting Powered False 00:25:52.732676 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11429): Process ended prematurely: osmo-stp_10.42.42.5(pid=11429) [trial-2384↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11429)]