Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10595): Process ended prematurely: osmo-stp_10.42.42.5(pid=10595) [trial-2384↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10595)]
Standard Output
---------------------------------------------- trial-2384 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 00:17:45.579759 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:17:45.590698 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:17:45.732676 tst cs_paging_gprs_active.py: using LAC 32311 00:17:45.868439 tst cs_paging_gprs_active.py: using RAC 181 00:17:46.015913 tst cs_paging_gprs_active.py: using CellId 32311 00:17:46.147540 tst cs_paging_gprs_active.py: using BVCI 32312 00:17:46.174352 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:17:46.186665 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:17:46.199469 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:17:46.212584 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:17:46.225163 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:17:46.236240 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:17:46.265331 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:17:46.278592 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:17:46.290828 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:17:46.511136 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:17:46.835799 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:17:46.975824 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:17:47.333853 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10585): Launched 00:17:47.617401 run iperf3-srv_10.42.42.10(pid=10586): Launched 00:17:47.818690 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:17:47.955558 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:17:48.294120 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10587): Launched 00:17:48.575882 run iperf3-srv_10.42.42.10(pid=10588): Launched 00:17:48.776209 tst cs_paging_gprs_active.py:38: start network... 00:17:48.912875 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:17:49.426912 run create_hlr_db(pid=10589): Launched 00:17:49.615161 bus /gobi_6: Setting Powered False 00:17:50.624188 run create_hlr_db(pid=10589): Terminated: ok {rc=0} 00:17:51.067897 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10591): Launched 00:17:51.396830 run osmo-hlr_10.42.42.2(pid=10592): Launched 00:17:51.516588 run osmo-stp_10.42.42.5: Starting osmo-stp 00:17:52.086775 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10594): Launched 00:17:52.414087 run osmo-stp_10.42.42.5(pid=10595): Launched 00:17:52.533120 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:17:53.102666 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10597): Launched 00:17:53.219308 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:17:53.503586 run patchelf(pid=10598): Launched 00:17:53.694388 run osmo-stp_10.42.42.5(pid=10595): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10595)] 00:17:53.833124 run osmo-stp_10.42.42.5(pid=10595): stdout: | (launched: 2022-12-13_00:17:52.252599) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:17:53.972061 run osmo-stp_10.42.42.5(pid=10595): stderr: | �[0;m�[38;5;43m20221213001752446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213001752446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213001752446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213001752447 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213001752447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213001752447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213001752447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:17:54.106682 run osmo-stp_10.42.42.5(pid=10595): stdout: | (launched: 2022-12-13_00:17:52.252599) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:17:54.239863 run osmo-stp_10.42.42.5(pid=10595): stderr: | �[0;m�[38;5;43m20221213001752446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213001752446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213001752446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213001752447 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213001752447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213001752447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213001752447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:17:54.396114 run patchelf(pid=10598): Terminating (SIGINT) 00:17:54.579758 run patchelf(pid=10598): Terminated: ok {rc=0} 00:17:54.613241 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10595): Process ended prematurely: osmo-stp_10.42.42.5(pid=10595) [trial-2384↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10595)] [trial-2384↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 00:17:54.623063 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 00:17:54.686890 run osmo-hlr_10.42.42.2(pid=10592): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10592)] 00:17:54.738432 run osmo-hlr_10.42.42.2(pid=10592): stdout: | (launched: 2022-12-13_00:17:51.234481) 00:17:54.790666 run osmo-hlr_10.42.42.2(pid=10592): stderr: | �[0;m�[1;31m20221213001751433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213001751433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213001751433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213001751433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213001751433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213001751433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213001751445 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213001751454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213001751454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213001751454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:17:54.834655 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10585): Terminating (SIGTERM) 00:17:54.876480 run iperf3-srv_10.42.42.10(pid=10586): Terminating (SIGTERM) 00:17:54.918364 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10587): Terminating (SIGTERM) 00:17:54.960191 run iperf3-srv_10.42.42.10(pid=10588): Terminating (SIGTERM) 00:17:55.002530 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10591): Terminating (SIGTERM) 00:17:55.044105 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10594): Terminating (SIGTERM) 00:17:55.086076 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10597): Terminating (SIGTERM) 00:17:55.095972 --- ParallelTerminationStrategy: PID 10585 died... 00:17:55.151966 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10585): Terminated: ok {rc=0} 00:17:55.161973 --- ParallelTerminationStrategy: PID 10586 died... 00:17:55.217188 run iperf3-srv_10.42.42.10(pid=10586): Terminated {rc=256} 00:17:55.227395 --- ParallelTerminationStrategy: PID 10587 died... 00:17:55.283042 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10587): Terminated: ok {rc=0} 00:17:55.293099 --- ParallelTerminationStrategy: PID 10588 died... 00:17:55.348549 run iperf3-srv_10.42.42.10(pid=10588): Terminated {rc=256} 00:17:55.358685 --- ParallelTerminationStrategy: PID 10591 died... 00:17:55.414326 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10591): Terminated: ok {rc=0} 00:17:55.424567 --- ParallelTerminationStrategy: PID 10594 died... 00:17:55.480284 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10594): Terminated: ok {rc=0} 00:17:55.490586 --- ParallelTerminationStrategy: PID 10597 died... 00:17:55.546406 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10597): Terminated: ok {rc=0} 00:17:55.633289 bus /gobi_0: Setting Powered False 00:17:56.740042 bus /gobi_0: Setting Powered False 00:17:57.851781 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10595): Process ended prematurely: osmo-stp_10.42.42.5(pid=10595) [trial-2384↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10595)]