Failed
gprs:sysmo.cs_paging_gprs_active.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10443): Process ended prematurely: osmo-stp_10.42.42.5(pid=10443) [trial-2384↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10443)]
Standard Output
---------------------------------------------- trial-2384 gprs:sysmo cs_paging_gprs_active.py ---------------------------------------------- 00:15:44.630466 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:15:44.641073 tst gprs:sysmo: Using 1 x bts (candidates: 1) 00:15:44.763256 tst cs_paging_gprs_active.py: using LAC 32301 00:15:44.879731 tst cs_paging_gprs_active.py: using RAC 171 00:15:45.005710 tst cs_paging_gprs_active.py: using CellId 32301 00:15:45.125795 tst cs_paging_gprs_active.py: using BVCI 32302 00:15:45.148846 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:15:45.159476 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:15:45.169979 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:15:45.181013 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:15:45.191412 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:15:45.201714 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:15:45.212102 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:15:45.222449 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:15:45.234185 tst gprs:sysmo: Using 1 x modem (candidates: 4) 00:15:45.354095 tst gprs:sysmo: Using 1 x modem (candidates: 4) 00:15:45.648915 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:15:45.786762 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:15:46.152924 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10433): Launched 00:15:46.451793 run iperf3-srv_10.42.42.10(pid=10434): Launched 00:15:46.655291 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:15:46.794058 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:15:47.144771 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10435): Launched 00:15:47.409542 run iperf3-srv_10.42.42.10(pid=10436): Launched 00:15:47.594626 tst cs_paging_gprs_active.py:38: start network... 00:15:47.720665 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:15:48.208690 run create_hlr_db(pid=10437): Launched 00:15:48.382773 bus /sierra_2: Setting Powered False 00:15:49.404732 run create_hlr_db(pid=10437): Terminated: ok {rc=0} 00:15:49.839271 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10439): Launched 00:15:50.166330 run osmo-hlr_10.42.42.2(pid=10440): Launched 00:15:50.286814 run osmo-stp_10.42.42.5: Starting osmo-stp 00:15:50.852197 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10442): Launched 00:15:51.177953 run osmo-stp_10.42.42.5(pid=10443): Launched 00:15:51.297157 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:15:52.861678 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10445): Launched 00:15:52.978726 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:15:53.264119 run patchelf(pid=10446): Launched 00:15:53.454356 run osmo-stp_10.42.42.5(pid=10443): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10443)] 00:15:53.594029 run osmo-stp_10.42.42.5(pid=10443): stdout: | (launched: 2022-12-13_00:15:51.017329) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:15:53.733389 run osmo-stp_10.42.42.5(pid=10443): stderr: | �[0;m�[38;5;43m20221213001551210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213001551211 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213001551211 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213001551211 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213001551212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213001551212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213001551212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:15:53.868710 run osmo-stp_10.42.42.5(pid=10443): stdout: | (launched: 2022-12-13_00:15:51.017329) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:15:54.002780 run osmo-stp_10.42.42.5(pid=10443): stderr: | �[0;m�[38;5;43m20221213001551210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213001551211 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213001551211 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213001551211 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213001551212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213001551212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213001551212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:15:54.158897 run patchelf(pid=10446): Terminating (SIGINT) 00:15:54.342144 run patchelf(pid=10446): Terminated: ok {rc=0} 00:15:54.375539 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10443): Process ended prematurely: osmo-stp_10.42.42.5(pid=10443) [trial-2384↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10443)] [trial-2384↪gprs:sysmo↪cs_paging_gprs_active.py:38] 00:15:54.385399 tst cs_paging_gprs_active.py:38: Test FAILED (9.8 sec) 00:15:54.449767 run osmo-hlr_10.42.42.2(pid=10440): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:sysmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10440)] 00:15:54.501865 run osmo-hlr_10.42.42.2(pid=10440): stdout: | (launched: 2022-12-13_00:15:50.005651) 00:15:54.554832 run osmo-hlr_10.42.42.2(pid=10440): stderr: | �[0;m�[1;31m20221213001550206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213001550206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213001550206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213001550206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213001550206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213001550206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213001550220 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:sysmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213001550229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213001550229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213001550229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:15:54.599849 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10433): Terminating (SIGTERM) 00:15:54.642782 run iperf3-srv_10.42.42.10(pid=10434): Terminating (SIGTERM) 00:15:54.685292 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10435): Terminating (SIGTERM) 00:15:54.727766 run iperf3-srv_10.42.42.10(pid=10436): Terminating (SIGTERM) 00:15:54.770798 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10439): Terminating (SIGTERM) 00:15:54.813347 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10442): Terminating (SIGTERM) 00:15:54.855906 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10445): Terminating (SIGTERM) 00:15:54.866232 --- ParallelTerminationStrategy: PID 10433 died... 00:15:54.922637 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10433): Terminated: ok {rc=0} 00:15:54.933343 --- ParallelTerminationStrategy: PID 10434 died... 00:15:54.989243 run iperf3-srv_10.42.42.10(pid=10434): Terminated {rc=256} 00:15:54.999614 --- ParallelTerminationStrategy: PID 10435 died... 00:15:55.056390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10435): Terminated: ok {rc=0} 00:15:55.066646 --- ParallelTerminationStrategy: PID 10436 died... 00:15:55.123207 run iperf3-srv_10.42.42.10(pid=10436): Terminated {rc=256} 00:15:55.133469 --- ParallelTerminationStrategy: PID 10439 died... 00:15:55.189762 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10439): Terminated: ok {rc=0} 00:15:55.199974 --- ParallelTerminationStrategy: PID 10442 died... 00:15:55.256132 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10442): Terminated: ok {rc=0} 00:15:55.266859 --- ParallelTerminationStrategy: PID 10445 died... 00:15:55.323250 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10445): Terminated: ok {rc=0} 00:15:55.410292 bus /gobi_0: Setting Powered False 00:15:56.516346 bus /gobi_0: Setting Powered False 00:15:57.623894 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10443): Process ended prematurely: osmo-stp_10.42.42.5(pid=10443) [trial-2384↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10443)]