Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=12168): Process ended prematurely: osmo-stp_10.42.42.5(pid=12168) [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12168)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 00:36:16.437220 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:36:16.449593 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 00:36:16.634321 tst cs_paging_gprs_active.py: using LAC 32409 00:36:16.766433 tst cs_paging_gprs_active.py: using RAC 24 00:36:16.899884 tst cs_paging_gprs_active.py: using CellId 32409 00:36:17.033581 tst cs_paging_gprs_active.py: using BVCI 32410 00:36:17.060467 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:36:17.073103 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:36:17.085528 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:36:17.099138 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:36:17.113131 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:36:17.127439 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:36:17.140705 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:36:17.153101 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:36:17.167227 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 00:36:17.296318 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 00:36:17.585031 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:36:17.715023 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:36:18.038219 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12158): Launched 00:36:18.307337 run iperf3-srv_10.42.42.10(pid=12159): Launched 00:36:18.497432 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:36:18.627340 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:36:18.949277 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12160): Launched 00:36:19.218364 run iperf3-srv_10.42.42.10(pid=12161): Launched 00:36:19.408534 tst cs_paging_gprs_active.py:38: start network... 00:36:19.537829 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:36:20.035699 run create_hlr_db(pid=12162): Launched 00:36:20.214156 bus /gobi_6: Setting Powered False 00:36:21.236384 run create_hlr_db(pid=12162): Terminated: ok {rc=0} 00:36:21.679112 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12164): Launched 00:36:22.031303 run osmo-hlr_10.42.42.2(pid=12165): Launched 00:36:22.156482 run osmo-stp_10.42.42.5: Starting osmo-stp 00:36:22.738799 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12167): Launched 00:36:23.072049 run osmo-stp_10.42.42.5(pid=12168): Launched 00:36:23.193527 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:36:23.775836 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12170): Launched 00:36:23.894999 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:36:24.185659 run patchelf(pid=12171): Launched 00:36:24.380642 run osmo-stp_10.42.42.5(pid=12168): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12168)] 00:36:24.522504 run osmo-stp_10.42.42.5(pid=12168): stdout: | (launched: 2022-12-13_00:36:22.908443) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:36:24.664436 run osmo-stp_10.42.42.5(pid=12168): stderr: | �[0;m�[38;5;43m20221213003623095 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003623096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003623096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003623096 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003623097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003623097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003623097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:36:24.801856 run osmo-stp_10.42.42.5(pid=12168): stdout: | (launched: 2022-12-13_00:36:22.908443) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:36:24.938357 run osmo-stp_10.42.42.5(pid=12168): stderr: | �[0;m�[38;5;43m20221213003623095 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003623096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003623096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003623096 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003623097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003623097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003623097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:36:25.097850 run patchelf(pid=12171): Terminating (SIGINT) 00:36:25.285429 run patchelf(pid=12171): Terminated: ok {rc=0} 00:36:25.319585 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12168): Process ended prematurely: osmo-stp_10.42.42.5(pid=12168) [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12168)] [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 00:36:25.329576 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 00:36:25.394204 run osmo-hlr_10.42.42.2(pid=12165): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12165)] 00:36:25.446593 run osmo-hlr_10.42.42.2(pid=12165): stdout: | (launched: 2022-12-13_00:36:21.848524) 00:36:25.499769 run osmo-hlr_10.42.42.2(pid=12165): stderr: | �[0;m�[1;31m20221213003622065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213003622065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213003622065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213003622065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213003622065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213003622065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213003622077 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213003622086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213003622086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213003622086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:36:25.545131 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12158): Terminating (SIGTERM) 00:36:25.587907 run iperf3-srv_10.42.42.10(pid=12159): Terminating (SIGTERM) 00:36:25.631044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12160): Terminating (SIGTERM) 00:36:25.673715 run iperf3-srv_10.42.42.10(pid=12161): Terminating (SIGTERM) 00:36:25.716381 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12164): Terminating (SIGTERM) 00:36:25.758885 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12167): Terminating (SIGTERM) 00:36:25.801601 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12170): Terminating (SIGTERM) 00:36:25.811736 --- ParallelTerminationStrategy: PID 12158 died... 00:36:25.868817 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12158): Terminated: ok {rc=0} 00:36:25.879067 --- ParallelTerminationStrategy: PID 12159 died... 00:36:25.935740 run iperf3-srv_10.42.42.10(pid=12159): Terminated {rc=256} 00:36:25.945936 --- ParallelTerminationStrategy: PID 12160 died... 00:36:26.002829 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12160): Terminated: ok {rc=0} 00:36:26.013048 --- ParallelTerminationStrategy: PID 12161 died... 00:36:26.069446 run iperf3-srv_10.42.42.10(pid=12161): Terminated {rc=256} 00:36:26.079638 --- ParallelTerminationStrategy: PID 12164 died... 00:36:26.136786 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12164): Terminated: ok {rc=0} 00:36:26.147028 --- ParallelTerminationStrategy: PID 12167 died... 00:36:26.204221 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12167): Terminated: ok {rc=0} 00:36:26.214411 --- ParallelTerminationStrategy: PID 12170 died... 00:36:26.271211 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12170): Terminated: ok {rc=0} 00:36:26.360768 bus /gobi_0: Setting Powered False 00:36:27.468605 bus /gobi_0: Setting Powered False 00:36:28.579156 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12168): Process ended prematurely: osmo-stp_10.42.42.5(pid=12168) [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12168)]