Failed
dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=15880): Process ended prematurely: osmo-stp_10.42.42.5(pid=15880) [trial-2384↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15880)]
Standard Output
---------------------------------------------- trial-2384 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 01:10:34.099066 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:10:34.110989 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 01:10:34.261831 tst switch_tch_pdch.py: using LAC 32589 01:10:34.379534 tst switch_tch_pdch.py: using RAC 204 01:10:34.499550 tst switch_tch_pdch.py: using CellId 32589 01:10:34.616464 tst switch_tch_pdch.py: using BVCI 32590 01:10:34.639692 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:10:34.651201 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:10:34.662947 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:10:34.674391 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:10:34.685730 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:10:34.696865 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:10:34.709216 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:10:34.720340 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 01:10:34.843033 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 01:10:35.123616 tst switch_tch_pdch.py:51: start network... 01:10:35.249238 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:10:35.739155 run create_hlr_db(pid=15874): Launched 01:10:35.914011 bus /gobi_6: Setting Powered False 01:10:36.947534 run create_hlr_db(pid=15874): Terminated: ok {rc=0} 01:10:37.359329 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15876): Launched 01:10:37.664831 run osmo-hlr_10.42.42.2(pid=15877): Launched 01:10:37.783462 run osmo-stp_10.42.42.5: Starting osmo-stp 01:10:38.320093 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15879): Launched 01:10:38.624546 run osmo-stp_10.42.42.5(pid=15880): Launched 01:10:38.733406 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:10:39.266115 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15882): Launched 01:10:39.373547 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:10:39.641828 run patchelf(pid=15883): Launched 01:10:39.820069 run osmo-stp_10.42.42.5(pid=15880): ERR: Terminated: ERROR {rc=1} [trial-2384↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15880)] 01:10:39.949968 run osmo-stp_10.42.42.5(pid=15880): stdout: | (launched: 2022-12-13_01:10:38.473890) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:10:40.080066 run osmo-stp_10.42.42.5(pid=15880): stderr: | �[0;m�[38;5;43m20221213011038644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011038644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011038644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011038645 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011038645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011038645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011038645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:10:40.205378 run osmo-stp_10.42.42.5(pid=15880): stdout: | (launched: 2022-12-13_01:10:38.473890) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:10:40.329594 run osmo-stp_10.42.42.5(pid=15880): stderr: | �[0;m�[38;5;43m20221213011038644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011038644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011038644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011038645 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011038645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011038645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011038645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:10:40.474997 run patchelf(pid=15883): Terminating (SIGINT) 01:10:40.646338 run patchelf(pid=15883): Terminated: ok {rc=0} 01:10:40.677414 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=15880): Process ended prematurely: osmo-stp_10.42.42.5(pid=15880) [trial-2384↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15880)] [trial-2384↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 01:10:40.686096 tst switch_tch_pdch.py:54: Test FAILED (6.6 sec) 01:10:40.746064 run osmo-hlr_10.42.42.2(pid=15877): ERR: Terminated: ERROR {rc=237} [trial-2384↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15877)] 01:10:40.795389 run osmo-hlr_10.42.42.2(pid=15877): stdout: | (launched: 2022-12-13_01:10:37.513616) 01:10:40.845424 run osmo-hlr_10.42.42.2(pid=15877): stderr: | �[0;m�[1;31m20221213011037691 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213011037691 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213011037691 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213011037691 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213011037692 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213011037692 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213011037704 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213011037713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213011037713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213011037713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:10:40.887667 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15876): Terminating (SIGTERM) 01:10:40.927545 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15879): Terminating (SIGTERM) 01:10:40.967470 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15882): Terminating (SIGTERM) 01:10:40.976778 --- ParallelTerminationStrategy: PID 15876 died... 01:10:41.030600 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15876): Terminated: ok {rc=0} 01:10:41.040318 --- ParallelTerminationStrategy: PID 15879 died... 01:10:41.093971 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15879): Terminated: ok {rc=0} 01:10:41.103715 --- ParallelTerminationStrategy: PID 15882 died... 01:10:41.157098 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15882): Terminated: ok {rc=0} 01:10:41.240698 bus /gobi_0: Setting Powered False 01:10:42.341647 bus /gobi_0: Setting Powered False 01:10:43.448580 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15880): Process ended prematurely: osmo-stp_10.42.42.5(pid=15880) [trial-2384↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15880)]