Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10662): Process ended prematurely: osmo-stp_10.42.42.5(pid=10662) [trial-2384↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10662)]
Standard Output
---------------------------------------------- trial-2384 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 00:18:46.230889 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:18:46.246056 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:18:46.401506 tst cs_paging_gprs_active.py: using LAC 32316 00:18:46.547152 tst cs_paging_gprs_active.py: using RAC 186 00:18:46.712569 tst cs_paging_gprs_active.py: using CellId 32316 00:18:46.847489 tst cs_paging_gprs_active.py: using BVCI 32317 00:18:46.875087 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:18:46.887205 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:18:46.900381 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:18:46.912440 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:18:46.925755 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:18:46.940032 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:18:46.953393 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:18:46.965518 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:18:46.978738 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:18:47.097813 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:18:47.379139 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:18:47.504762 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:18:47.818080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10652): Launched 00:18:48.079023 run iperf3-srv_10.42.42.10(pid=10653): Launched 00:18:48.262188 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:18:48.387227 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:18:48.700705 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10654): Launched 00:18:48.964551 run iperf3-srv_10.42.42.10(pid=10655): Launched 00:18:49.148665 tst cs_paging_gprs_active.py:38: start network... 00:18:49.274394 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:18:49.760360 run create_hlr_db(pid=10656): Launched 00:18:49.933944 bus /gobi_6: Setting Powered False 00:18:50.957768 run create_hlr_db(pid=10656): Terminated: ok {rc=0} 00:18:51.391427 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10658): Launched 00:18:51.721700 run osmo-hlr_10.42.42.2(pid=10659): Launched 00:18:51.840178 run osmo-stp_10.42.42.5: Starting osmo-stp 00:18:52.407961 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10661): Launched 00:18:52.736279 run osmo-stp_10.42.42.5(pid=10662): Launched 00:18:52.854329 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:18:53.424506 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10664): Launched 00:18:53.541383 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:18:53.828238 run patchelf(pid=10665): Launched 00:18:54.018685 run osmo-stp_10.42.42.5(pid=10662): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10662)] 00:18:54.157704 run osmo-stp_10.42.42.5(pid=10662): stdout: | (launched: 2022-12-13_00:18:52.573537) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:18:54.296768 run osmo-stp_10.42.42.5(pid=10662): stderr: | �[0;m�[38;5;43m20221213001852766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213001852767 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213001852767 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213001852767 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213001852768 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213001852768 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213001852768 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:18:54.431271 run osmo-stp_10.42.42.5(pid=10662): stdout: | (launched: 2022-12-13_00:18:52.573537) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:18:54.565584 run osmo-stp_10.42.42.5(pid=10662): stderr: | �[0;m�[38;5;43m20221213001852766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213001852767 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213001852767 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213001852767 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213001852768 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213001852768 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213001852768 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:18:54.722283 run patchelf(pid=10665): Terminating (SIGINT) 00:18:54.905774 run patchelf(pid=10665): Terminated: ok {rc=0} 00:18:54.939464 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10662): Process ended prematurely: osmo-stp_10.42.42.5(pid=10662) [trial-2384↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10662)] [trial-2384↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 00:18:54.949431 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 00:18:55.013545 run osmo-hlr_10.42.42.2(pid=10659): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10659)] 00:18:55.065530 run osmo-hlr_10.42.42.2(pid=10659): stdout: | (launched: 2022-12-13_00:18:51.557640) 00:18:55.118067 run osmo-hlr_10.42.42.2(pid=10659): stderr: | �[0;m�[1;31m20221213001851756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213001851756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213001851756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213001851756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213001851756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213001851756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213001851807 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213001851816 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213001851816 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213001851816 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:18:55.162636 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10652): Terminating (SIGTERM) 00:18:55.204894 run iperf3-srv_10.42.42.10(pid=10653): Terminating (SIGTERM) 00:18:55.247262 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10654): Terminating (SIGTERM) 00:18:55.289541 run iperf3-srv_10.42.42.10(pid=10655): Terminating (SIGTERM) 00:18:55.332322 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10658): Terminating (SIGTERM) 00:18:55.374246 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10661): Terminating (SIGTERM) 00:18:55.417002 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10664): Terminating (SIGTERM) 00:18:55.426835 --- ParallelTerminationStrategy: PID 10652 died... 00:18:55.483486 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10652): Terminated: ok {rc=0} 00:18:55.493991 --- ParallelTerminationStrategy: PID 10653 died... 00:18:55.549924 run iperf3-srv_10.42.42.10(pid=10653): Terminated {rc=256} 00:18:55.560082 --- ParallelTerminationStrategy: PID 10654 died... 00:18:55.616001 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10654): Terminated: ok {rc=0} 00:18:55.626106 --- ParallelTerminationStrategy: PID 10655 died... 00:18:55.682490 run iperf3-srv_10.42.42.10(pid=10655): Terminated {rc=256} 00:18:55.692507 --- ParallelTerminationStrategy: PID 10658 died... 00:18:55.748828 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10658): Terminated: ok {rc=0} 00:18:55.758999 --- ParallelTerminationStrategy: PID 10661 died... 00:18:55.814869 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10661): Terminated: ok {rc=0} 00:18:55.825401 --- ParallelTerminationStrategy: PID 10664 died... 00:18:55.881092 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10664): Terminated: ok {rc=0} 00:18:55.967829 bus /gobi_0: Setting Powered False 00:18:57.074663 bus /gobi_0: Setting Powered False 00:18:58.181586 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10662): Process ended prematurely: osmo-stp_10.42.42.5(pid=10662) [trial-2384↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10662)]