Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=12859): Process ended prematurely: osmo-stp_10.42.42.5(pid=12859) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12859)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 00:42:15.524264 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:42:15.535737 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:42:15.683506 tst cs_paging_gprs_active.py: using LAC 32441 00:42:15.811278 tst cs_paging_gprs_active.py: using RAC 56 00:42:15.947914 tst cs_paging_gprs_active.py: using CellId 32441 00:42:16.090663 tst cs_paging_gprs_active.py: using BVCI 32442 00:42:16.116933 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:42:16.129415 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:42:16.142758 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:42:16.156150 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:42:16.169587 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:42:16.181820 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:42:16.195380 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:42:16.209822 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:42:16.223457 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:42:16.344023 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:42:16.631739 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:42:16.762817 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:42:17.105371 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12849): Launched 00:42:17.374856 run iperf3-srv_10.42.42.10(pid=12850): Launched 00:42:17.563163 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:42:17.691468 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:42:18.011103 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12851): Launched 00:42:18.277510 run iperf3-srv_10.42.42.10(pid=12852): Launched 00:42:18.465555 tst cs_paging_gprs_active.py:38: start network... 00:42:18.593809 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:42:19.090127 run create_hlr_db(pid=12853): Launched 00:42:19.267135 bus /gobi_6: Setting Powered False 00:42:20.288110 run create_hlr_db(pid=12853): Terminated: ok {rc=0} 00:42:20.699134 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12855): Launched 00:42:21.009130 run osmo-hlr_10.42.42.2(pid=12856): Launched 00:42:21.131481 run osmo-stp_10.42.42.5: Starting osmo-stp 00:42:21.671743 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12858): Launched 00:42:21.980878 run osmo-stp_10.42.42.5(pid=12859): Launched 00:42:22.092781 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:42:22.633674 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12861): Launched 00:42:22.743658 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:42:23.013346 run patchelf(pid=12862): Launched 00:42:23.193858 run osmo-stp_10.42.42.5(pid=12859): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12859)] 00:42:23.325105 run osmo-stp_10.42.42.5(pid=12859): stdout: | (launched: 2022-12-13_00:42:21.828401) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:42:23.456696 run osmo-stp_10.42.42.5(pid=12859): stderr: | �[0;m�[38;5;43m20221213004221998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213004221998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213004221998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213004221999 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213004221999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213004221999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213004221999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:42:23.583957 run osmo-stp_10.42.42.5(pid=12859): stdout: | (launched: 2022-12-13_00:42:21.828401) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:42:23.710560 run osmo-stp_10.42.42.5(pid=12859): stderr: | �[0;m�[38;5;43m20221213004221998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213004221998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213004221998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213004221999 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213004221999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213004221999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213004221999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:42:23.857849 run patchelf(pid=12862): Terminating (SIGINT) 00:42:24.031366 run patchelf(pid=12862): Terminated: ok {rc=0} 00:42:24.063050 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12859): Process ended prematurely: osmo-stp_10.42.42.5(pid=12859) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12859)] [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 00:42:24.072268 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 00:42:24.132637 run osmo-hlr_10.42.42.2(pid=12856): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12856)] 00:42:24.181774 run osmo-hlr_10.42.42.2(pid=12856): stdout: | (launched: 2022-12-13_00:42:20.856276) 00:42:24.231546 run osmo-hlr_10.42.42.2(pid=12856): stderr: | �[0;m�[1;31m20221213004221030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213004221030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213004221030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213004221030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213004221030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213004221030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213004221042 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213004221051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213004221051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213004221051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:42:24.273853 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12849): Terminating (SIGTERM) 00:42:24.313774 run iperf3-srv_10.42.42.10(pid=12850): Terminating (SIGTERM) 00:42:24.353828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12851): Terminating (SIGTERM) 00:42:24.393592 run iperf3-srv_10.42.42.10(pid=12852): Terminating (SIGTERM) 00:42:24.433388 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12855): Terminating (SIGTERM) 00:42:24.473307 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12858): Terminating (SIGTERM) 00:42:24.513167 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12861): Terminating (SIGTERM) 00:42:24.522338 --- ParallelTerminationStrategy: PID 12849 died... 00:42:24.575295 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12849): Terminated: ok {rc=0} 00:42:24.584814 --- ParallelTerminationStrategy: PID 12850 died... 00:42:24.637659 run iperf3-srv_10.42.42.10(pid=12850): Terminated {rc=256} 00:42:24.647173 --- ParallelTerminationStrategy: PID 12851 died... 00:42:24.700576 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12851): Terminated: ok {rc=0} 00:42:24.710169 --- ParallelTerminationStrategy: PID 12852 died... 00:42:24.763020 run iperf3-srv_10.42.42.10(pid=12852): Terminated {rc=256} 00:42:24.772443 --- ParallelTerminationStrategy: PID 12855 died... 00:42:24.825348 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12855): Terminated: ok {rc=0} 00:42:24.834840 --- ParallelTerminationStrategy: PID 12858 died... 00:42:24.887746 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12858): Terminated: ok {rc=0} 00:42:24.897353 --- ParallelTerminationStrategy: PID 12861 died... 00:42:24.950218 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12861): Terminated: ok {rc=0} 00:42:25.033835 bus /gobi_0: Setting Powered False 00:42:26.141832 bus /gobi_0: Setting Powered False 00:42:27.249483 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12859): Process ended prematurely: osmo-stp_10.42.42.5(pid=12859) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12859)]