Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=16542): Process ended prematurely: osmo-stp_10.42.42.5(pid=16542) [trial-2384↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16542)]
Standard Output
---------------------------------------------- trial-2384 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 01:20:00.803812 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:20:00.815094 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 01:20:00.981708 tst cs_paging_gprs_active.py: using LAC 32640 01:20:01.118009 tst cs_paging_gprs_active.py: using RAC 255 01:20:01.243671 tst cs_paging_gprs_active.py: using CellId 32640 01:20:01.405245 tst cs_paging_gprs_active.py: using BVCI 32641 01:20:01.432432 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:20:01.444386 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:20:01.455863 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:20:01.467347 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:20:01.478791 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:20:01.490377 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:20:01.501963 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:20:01.513314 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:20:01.525311 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 01:20:01.658644 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 01:20:01.989239 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:20:02.144335 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:20:02.504607 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16532): Launched 01:20:02.789465 run iperf3-srv_10.42.42.10(pid=16533): Launched 01:20:02.990964 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:20:03.128593 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:20:03.469767 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16534): Launched 01:20:03.755885 run iperf3-srv_10.42.42.10(pid=16535): Launched 01:20:03.957661 tst cs_paging_gprs_active.py:38: start network... 01:20:04.095056 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:20:04.615670 run create_hlr_db(pid=16536): Launched 01:20:04.811512 bus /sierra_2: Setting Powered False 01:20:05.828690 run create_hlr_db(pid=16536): Terminated: ok {rc=0} 01:20:06.267971 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16538): Launched 01:20:06.600915 run osmo-hlr_10.42.42.2(pid=16539): Launched 01:20:06.722602 run osmo-stp_10.42.42.5: Starting osmo-stp 01:20:07.297847 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16541): Launched 01:20:07.631229 run osmo-stp_10.42.42.5(pid=16542): Launched 01:20:07.751392 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:20:08.326879 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16544): Launched 01:20:08.444807 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:20:08.734275 run patchelf(pid=16545): Launched 01:20:08.926318 run osmo-stp_10.42.42.5(pid=16542): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16542)] 01:20:09.066777 run osmo-stp_10.42.42.5(pid=16542): stdout: | (launched: 2022-12-13_01:20:07.465274) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:20:09.207127 run osmo-stp_10.42.42.5(pid=16542): stderr: | �[0;m�[38;5;43m20221213012007655 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213012007655 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213012007655 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213012007656 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213012007656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213012007656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213012007656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:20:09.343195 run osmo-stp_10.42.42.5(pid=16542): stdout: | (launched: 2022-12-13_01:20:07.465274) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:20:09.478066 run osmo-stp_10.42.42.5(pid=16542): stderr: | �[0;m�[38;5;43m20221213012007655 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213012007655 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213012007655 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213012007656 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213012007656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213012007656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213012007656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:20:09.635928 run patchelf(pid=16545): Terminating (SIGINT) 01:20:09.820802 run patchelf(pid=16545): Terminated: ok {rc=0} 01:20:09.854696 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16542): Process ended prematurely: osmo-stp_10.42.42.5(pid=16542) [trial-2384↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16542)] [trial-2384↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 01:20:09.864434 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 01:20:09.928203 run osmo-hlr_10.42.42.2(pid=16539): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16539)] 01:20:09.979866 run osmo-hlr_10.42.42.2(pid=16539): stdout: | (launched: 2022-12-13_01:20:06.435875) 01:20:10.032023 run osmo-hlr_10.42.42.2(pid=16539): stderr: | �[0;m�[1;31m20221213012006631 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213012006631 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213012006631 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213012006631 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213012006631 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213012006631 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213012006643 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213012006652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213012006652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213012006652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:20:10.076269 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16532): Terminating (SIGTERM) 01:20:10.118752 run iperf3-srv_10.42.42.10(pid=16533): Terminating (SIGTERM) 01:20:10.160533 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16534): Terminating (SIGTERM) 01:20:10.202484 run iperf3-srv_10.42.42.10(pid=16535): Terminating (SIGTERM) 01:20:10.244749 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16538): Terminating (SIGTERM) 01:20:10.286806 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16541): Terminating (SIGTERM) 01:20:10.328746 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16544): Terminating (SIGTERM) 01:20:10.338852 --- ParallelTerminationStrategy: PID 16532 died... 01:20:10.395217 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16532): Terminated: ok {rc=0} 01:20:10.405508 --- ParallelTerminationStrategy: PID 16533 died... 01:20:10.461383 run iperf3-srv_10.42.42.10(pid=16533): Terminated {rc=256} 01:20:10.471468 --- ParallelTerminationStrategy: PID 16534 died... 01:20:10.527761 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16534): Terminated: ok {rc=0} 01:20:10.537965 --- ParallelTerminationStrategy: PID 16535 died... 01:20:10.593907 run iperf3-srv_10.42.42.10(pid=16535): Terminated {rc=256} 01:20:10.603975 --- ParallelTerminationStrategy: PID 16538 died... 01:20:10.659949 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16538): Terminated: ok {rc=0} 01:20:10.670130 --- ParallelTerminationStrategy: PID 16541 died... 01:20:10.725978 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16541): Terminated: ok {rc=0} 01:20:10.736363 --- ParallelTerminationStrategy: PID 16544 died... 01:20:10.792758 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16544): Terminated: ok {rc=0} 01:20:10.879039 bus /gobi_0: Setting Powered False 01:20:11.986053 bus /gobi_0: Setting Powered False 01:20:13.098715 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16542): Process ended prematurely: osmo-stp_10.42.42.5(pid=16542) [trial-2384↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16542)]