Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=10511): Process ended prematurely: osmo-stp_10.42.42.5(pid=10511) [trial-2384↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10511)]
Standard Output
---------------------------------------------- trial-2384 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 00:16:45.497781 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:45.508792 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:16:45.643320 tst cs_paging_gprs_active.py: using LAC 32306 00:16:45.766750 tst cs_paging_gprs_active.py: using RAC 176 00:16:45.890911 tst cs_paging_gprs_active.py: using CellId 32306 00:16:46.022084 tst cs_paging_gprs_active.py: using BVCI 32307 00:16:46.046425 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:46.058270 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:46.069854 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:46.081564 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:46.093283 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:46.104929 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:46.116399 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:46.127639 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:46.139126 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:16:46.279362 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:16:46.603808 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:16:46.734906 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:16:47.071693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10501): Launched 00:16:47.358348 run iperf3-srv_10.42.42.10(pid=10502): Launched 00:16:47.559280 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:16:47.697510 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:16:48.036883 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10503): Launched 00:16:48.319428 run iperf3-srv_10.42.42.10(pid=10504): Launched 00:16:48.520559 tst cs_paging_gprs_active.py:38: start network... 00:16:48.658415 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:16:49.173546 run create_hlr_db(pid=10505): Launched 00:16:49.362246 bus /gobi_6: Setting Powered False 00:16:50.383720 run create_hlr_db(pid=10505): Terminated: ok {rc=0} 00:16:50.792175 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10507): Launched 00:16:51.097842 run osmo-hlr_10.42.42.2(pid=10508): Launched 00:16:51.210357 run osmo-stp_10.42.42.5: Starting osmo-stp 00:16:51.739195 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10510): Launched 00:16:52.044622 run osmo-stp_10.42.42.5(pid=10511): Launched 00:16:52.159878 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:16:52.690950 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10513): Launched 00:16:52.799068 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:16:53.065289 run patchelf(pid=10514): Launched 00:16:53.242372 run osmo-stp_10.42.42.5(pid=10511): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10511)] 00:16:53.371340 run osmo-stp_10.42.42.5(pid=10511): stdout: | (launched: 2022-12-13_00:16:51.893210) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:16:53.500696 run osmo-stp_10.42.42.5(pid=10511): stderr: | �[0;m�[38;5;43m20221213001652064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213001652065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213001652065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213001652065 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213001652066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213001652066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213001652066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:16:53.626504 run osmo-stp_10.42.42.5(pid=10511): stdout: | (launched: 2022-12-13_00:16:51.893210) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:16:53.750722 run osmo-stp_10.42.42.5(pid=10511): stderr: | �[0;m�[38;5;43m20221213001652064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213001652065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213001652065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213001652065 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213001652066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213001652066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213001652066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:16:53.895682 run patchelf(pid=10514): Terminating (SIGINT) 00:16:54.067227 run patchelf(pid=10514): Terminated: ok {rc=0} 00:16:54.098704 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10511): Process ended prematurely: osmo-stp_10.42.42.5(pid=10511) [trial-2384↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10511)] [trial-2384↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 00:16:54.107860 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 00:16:54.168100 run osmo-hlr_10.42.42.2(pid=10508): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10508)] 00:16:54.217283 run osmo-hlr_10.42.42.2(pid=10508): stdout: | (launched: 2022-12-13_00:16:50.946903) 00:16:54.267220 run osmo-hlr_10.42.42.2(pid=10508): stderr: | �[0;m�[1;31m20221213001651123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213001651123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213001651123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213001651123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213001651123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213001651124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213001651136 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213001651146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213001651146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213001651147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:16:54.309860 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10501): Terminating (SIGTERM) 00:16:54.350275 run iperf3-srv_10.42.42.10(pid=10502): Terminating (SIGTERM) 00:16:54.390576 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10503): Terminating (SIGTERM) 00:16:54.430770 run iperf3-srv_10.42.42.10(pid=10504): Terminating (SIGTERM) 00:16:54.471001 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10507): Terminating (SIGTERM) 00:16:54.511106 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10510): Terminating (SIGTERM) 00:16:54.551192 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10513): Terminating (SIGTERM) 00:16:54.560614 --- ParallelTerminationStrategy: PID 10501 died... 00:16:54.614223 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10501): Terminated: ok {rc=0} 00:16:54.623972 --- ParallelTerminationStrategy: PID 10502 died... 00:16:54.676826 run iperf3-srv_10.42.42.10(pid=10502): Terminated {rc=256} 00:16:54.686563 --- ParallelTerminationStrategy: PID 10503 died... 00:16:54.739735 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10503): Terminated: ok {rc=0} 00:16:54.749532 --- ParallelTerminationStrategy: PID 10504 died... 00:16:54.802472 run iperf3-srv_10.42.42.10(pid=10504): Terminated {rc=256} 00:16:54.812192 --- ParallelTerminationStrategy: PID 10507 died... 00:16:54.865226 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10507): Terminated: ok {rc=0} 00:16:54.875072 --- ParallelTerminationStrategy: PID 10510 died... 00:16:54.928229 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10510): Terminated: ok {rc=0} 00:16:54.938186 --- ParallelTerminationStrategy: PID 10513 died... 00:16:54.991504 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10513): Terminated: ok {rc=0} 00:16:55.075233 bus /gobi_0: Setting Powered False 00:16:56.181659 bus /gobi_0: Setting Powered False 00:16:57.288274 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10511): Process ended prematurely: osmo-stp_10.42.42.5(pid=10511) [trial-2384↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10511)]