Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12100): Process ended prematurely: osmo-stp_10.42.42.5(pid=12100) [trial-2384↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12100)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 00:35:16.553638 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:35:16.565571 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:35:16.728005 tst cs_paging_gprs_active.py: using LAC 32404 00:35:16.868421 tst cs_paging_gprs_active.py: using RAC 19 00:35:16.997771 tst cs_paging_gprs_active.py: using CellId 32404 00:35:17.127850 tst cs_paging_gprs_active.py: using BVCI 32405 00:35:17.154563 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:35:17.167004 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:35:17.179389 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:35:17.193888 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:35:17.207097 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:35:17.219381 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:35:17.233661 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:35:17.247071 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:35:17.259508 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:35:17.388272 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:35:17.671077 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:35:17.797932 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:35:18.116127 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12090): Launched 00:35:18.381175 run iperf3-srv_10.42.42.10(pid=12091): Launched 00:35:18.567676 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:35:18.695049 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:35:19.012793 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12092): Launched 00:35:19.276327 run iperf3-srv_10.42.42.10(pid=12093): Launched 00:35:19.462044 tst cs_paging_gprs_active.py:38: start network... 00:35:19.589593 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:35:20.080805 run create_hlr_db(pid=12094): Launched 00:35:20.256789 bus /gobi_6: Setting Powered False 00:35:21.278005 run create_hlr_db(pid=12094): Terminated: ok {rc=0} 00:35:21.713178 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12096): Launched 00:35:22.042903 run osmo-hlr_10.42.42.2(pid=12097): Launched 00:35:22.165413 run osmo-stp_10.42.42.5: Starting osmo-stp 00:35:22.738394 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12099): Launched 00:35:23.068376 run osmo-stp_10.42.42.5(pid=12100): Launched 00:35:23.188522 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:35:23.762504 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12102): Launched 00:35:23.880285 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:35:24.167778 run patchelf(pid=12103): Launched 00:35:24.360556 run osmo-stp_10.42.42.5(pid=12100): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12100)] 00:35:24.500858 run osmo-stp_10.42.42.5(pid=12100): stdout: | (launched: 2022-12-13_00:35:22.906293) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:35:24.641713 run osmo-stp_10.42.42.5(pid=12100): stderr: | �[0;m�[38;5;43m20221213003523092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003523092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003523093 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003523093 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003523093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003523094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003523094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:35:24.778172 run osmo-stp_10.42.42.5(pid=12100): stdout: | (launched: 2022-12-13_00:35:22.906293) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:35:24.913889 run osmo-stp_10.42.42.5(pid=12100): stderr: | �[0;m�[38;5;43m20221213003523092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003523092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003523093 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003523093 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003523093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003523094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003523094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:35:25.072189 run patchelf(pid=12103): Terminating (SIGINT) 00:35:25.258500 run patchelf(pid=12103): Terminated: ok {rc=0} 00:35:25.292609 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12100): Process ended prematurely: osmo-stp_10.42.42.5(pid=12100) [trial-2384↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12100)] [trial-2384↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 00:35:25.302486 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 00:35:25.366783 run osmo-hlr_10.42.42.2(pid=12097): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12097)] 00:35:25.418776 run osmo-hlr_10.42.42.2(pid=12097): stdout: | (launched: 2022-12-13_00:35:21.880637) 00:35:25.471236 run osmo-hlr_10.42.42.2(pid=12097): stderr: | �[0;m�[1;31m20221213003522075 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213003522075 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213003522075 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213003522075 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213003522075 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213003522075 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213003522087 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213003522096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213003522096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213003522096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:35:25.515684 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12090): Terminating (SIGTERM) 00:35:25.558344 run iperf3-srv_10.42.42.10(pid=12091): Terminating (SIGTERM) 00:35:25.600685 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12092): Terminating (SIGTERM) 00:35:25.643265 run iperf3-srv_10.42.42.10(pid=12093): Terminating (SIGTERM) 00:35:25.685414 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12096): Terminating (SIGTERM) 00:35:25.727773 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12099): Terminating (SIGTERM) 00:35:25.770014 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12102): Terminating (SIGTERM) 00:35:25.780167 --- ParallelTerminationStrategy: PID 12090 died... 00:35:25.836642 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12090): Terminated: ok {rc=0} 00:35:25.846734 --- ParallelTerminationStrategy: PID 12091 died... 00:35:25.902983 run iperf3-srv_10.42.42.10(pid=12091): Terminated {rc=256} 00:35:25.913121 --- ParallelTerminationStrategy: PID 12092 died... 00:35:25.969319 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12092): Terminated: ok {rc=0} 00:35:25.979353 --- ParallelTerminationStrategy: PID 12093 died... 00:35:26.035995 run iperf3-srv_10.42.42.10(pid=12093): Terminated {rc=256} 00:35:26.046049 --- ParallelTerminationStrategy: PID 12096 died... 00:35:26.102747 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12096): Terminated: ok {rc=0} 00:35:26.112740 --- ParallelTerminationStrategy: PID 12099 died... 00:35:26.169300 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12099): Terminated: ok {rc=0} 00:35:26.179668 --- ParallelTerminationStrategy: PID 12102 died... 00:35:26.235719 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12102): Terminated: ok {rc=0} 00:35:26.322781 bus /gobi_0: Setting Powered False 00:35:27.430564 bus /gobi_0: Setting Powered False 00:35:28.538636 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12100): Process ended prematurely: osmo-stp_10.42.42.5(pid=12100) [trial-2384↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12100)]