Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=457): Process ended prematurely: osmo-stp_10.42.42.5(pid=457) [trial-2387↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=457)]
Standard Output
---------------------------------------------- trial-2387 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 09:36:33.191127 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:36:33.202472 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 09:36:33.326457 tst ping_idle_ping.py: using LAC 33072 09:36:33.441306 tst ping_idle_ping.py: using RAC 177 09:36:33.556652 tst ping_idle_ping.py: using CellId 33072 09:36:33.673461 tst ping_idle_ping.py: using BVCI 33073 09:36:33.695879 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:36:33.706585 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:36:33.717094 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:36:33.727550 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:36:33.738756 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:36:33.750091 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:36:33.760813 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:36:33.771629 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 09:36:34.058621 tst ping_idle_ping.py:24: start network... 09:36:34.189336 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:36:34.692821 run create_hlr_db(pid=451): Launched 09:36:34.874739 bus /gobi_6: Setting Powered False 09:36:35.896030 run create_hlr_db(pid=451): Terminated: ok {rc=0} 09:36:36.290677 run pcap-recorder_any(filters='host 10.42.42.2')(pid=453): Launched 09:36:36.585375 run osmo-hlr_10.42.42.2(pid=454): Launched 09:36:36.694270 run osmo-stp_10.42.42.5: Starting osmo-stp 09:36:37.204054 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=456): Launched 09:36:37.497977 run osmo-stp_10.42.42.5(pid=457): Launched 09:36:37.605804 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:36:38.117087 run pcap-recorder_any(filters='host 10.42.42.6')(pid=459): Launched 09:36:38.221637 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:36:38.476871 run patchelf(pid=460): Launched 09:36:38.649081 run osmo-stp_10.42.42.5(pid=457): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=457)] 09:36:38.774736 run osmo-stp_10.42.42.5(pid=457): stdout: | (launched: 2022-12-13_09:36:37.352463) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:36:38.900175 run osmo-stp_10.42.42.5(pid=457): stderr: | �[0;m�[38;5;43m20221213093637523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213093637523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213093637523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213093637524 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213093637524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213093637524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213093637524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:36:39.021888 run osmo-stp_10.42.42.5(pid=457): stdout: | (launched: 2022-12-13_09:36:37.352463) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:36:39.142756 run osmo-stp_10.42.42.5(pid=457): stderr: | �[0;m�[38;5;43m20221213093637523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213093637523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213093637523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213093637524 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213093637524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213093637524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213093637524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:36:39.282926 run patchelf(pid=460): Terminating (SIGINT) 09:36:39.447798 run patchelf(pid=460): Terminated: ok {rc=0} 09:36:39.478015 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=457): Process ended prematurely: osmo-stp_10.42.42.5(pid=457) [trial-2387↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=457)] [trial-2387↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 09:36:39.486575 tst ping_idle_ping.py:27: Test FAILED (6.3 sec) 09:36:39.546176 run osmo-hlr_10.42.42.2(pid=454): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=454)] 09:36:39.594649 run osmo-hlr_10.42.42.2(pid=454): stdout: | (launched: 2022-12-13_09:36:36.439669) 09:36:39.643683 run osmo-hlr_10.42.42.2(pid=454): stderr: | �[0;m�[1;31m20221213093636616 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213093636616 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213093636616 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213093636616 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213093636616 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213093636617 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213093636630 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213093636638 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213093636638 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213093636638 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:36:39.685452 run pcap-recorder_any(filters='host 10.42.42.2')(pid=453): Terminating (SIGTERM) 09:36:39.725149 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=456): Terminating (SIGTERM) 09:36:39.764360 run pcap-recorder_any(filters='host 10.42.42.6')(pid=459): Terminating (SIGTERM) 09:36:39.773603 --- ParallelTerminationStrategy: PID 453 died... 09:36:39.826846 run pcap-recorder_any(filters='host 10.42.42.2')(pid=453): Terminated: ok {rc=0} 09:36:39.836447 --- ParallelTerminationStrategy: PID 456 died... 09:36:39.889283 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=456): Terminated: ok {rc=0} 09:36:39.898806 --- ParallelTerminationStrategy: PID 459 died... 09:36:39.951938 run pcap-recorder_any(filters='host 10.42.42.6')(pid=459): Terminated: ok {rc=0} 09:36:40.034627 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=457): Process ended prematurely: osmo-stp_10.42.42.5(pid=457) [trial-2387↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=457)]